Quick Search

PRODUCTS

ACEMATT TS 100

Acematt TS 100 = Silica = Quartz

CAS Number: 112945-52-5
EINECS Number: 231-545-4
Chemical name: Silicon dioxide, chemically prepared

The chemical compound silicon dioxide, also known as silica (from the Latin silex), is an oxide of silicon with a chemical formula of SiO2 and has been known for its hardness since antiquity.
Silica is most commonly found in nature as sand or quartz, as well as in the cell walls of diatoms. 
ACEMATT TS 100 is a principal component of mosttypes of glass and substances such as concrete. 
Silica is the most abundant mineral in the earth's crust.

DESCRIPTION:
ACEMATT TS 100 is an untreated thermal silica with outstanding properties. 
ACEMATT TS 100 provides veryhigh efficiencyand transparency. 
ACEMATT TS 100 can be used in a largevarietyof coatings.
ACEMATT TS 100 is an untreated thermal silica characterised by very high matting efficiency combined with very high transparency. 
Silica can be used in water-based coatings, waterborne UV coatings, clear coatings, coatings for leather and films, as well as all types of top coats.

ACEMATT TS 100 ACEMATT TS 100 is a non-surface-treated, pyrogenic silica. 
ACEMATT TS 100 is characterized by excellent matting efficiency with maximum transparency.

TS100 matting powder produced by gas phase method, high matting, high transparency, especially suitable for all difficult matting paint systems, water-based latex paint and water-based wood paint. 
The specific functions and uses of TS100 matting powder are: easy to disperse, good matting, good transparency, excellent chemical resistance, electrical conductivity, etc.; mainly used for water-based coatings, two-component polyurethane coatings, wood lacquer, transparent paint, baking Type coatings, printing inks, etc.

Highly effective matting additive without surface treatment . 
Differs in excellent matting effect and high transparency . 
Recommended for use in various types of difficult-matting systems, in varnishes and high-quality coatings, in the production of artificial leather .

ACEMATT TS 100 has extremely high matting efficiency and transparency. 
ACEMATT TS 100 is recommended for high-end water-based coatings. 
Quartz is suitable for all difficult-to-matte coating systems and also for coating systems that require a touch.

ACEMATT TS 100 is a high performance matting agent adding versatility to your nail polish formulations. 
Only low levels of addition give a matt or crackle finish. 
ACEMATT TS 100, which is a fumed silica is listed with the INCI name 'Silica'.

Silica is a Thermal, untreated matting agent.
Average agglomerate particle size of Silica (median TEM): 4 µm

Properties and applications: ACEMATT TS 100 is an untreated thermal silica characterized by very high matting efficiency combined with very high transparency. 
ACEMATT TS 100 is particularly suitable for coating systems that are difficult to matt. 
ACEMATT TS 100 can be used in water-based coatings, waterborne UV coatings, clear coatings, coatings for leather and films, as well as all types of top coats. 
Coating formulations containing ACEMATT TS 100 show outstanding resistance against household chemicals. 
Due to the high purity and extremely low electrical conductivity, ACEMATT TS 100 is outstanding for applications in sensitive coating systems such as solder resist. 
ACEMATT TS 100 improves flow behavior and increases storage stability in powder coatings.

Product Description of Silica:
A thermal silica without surface treatment obtained by the Aerosil ® process; particle size 1): 4µm. ACEMATT® TS 100 has superior matting efficiency and transparency and is suitable for all coatings especially for water-based paints and for finishes/top coats. It has a low conductivity and improves the flow and shelf life of powder coatings.

Applications
ACEMATT TS 100 is characterised by its outstanding matting effiency and transparency. 
Silicas unique manufacturing process makes it especially suitable for all types of coating systems, waterbased coatings and for all types of top coat finishes. 
ACEMATT TS 100 promotes the formulation of coatings with excellent resistance to household chemicals. 
ACEMATT TS 100s high purity and resulting low conductivity makes ACEMATT TS 100 suitable for use in sensitive coating systems. 
ACEMATT TS 100 enhances the flow characteristics and the storage stability of powder coatings.

RECOMMENDED ADDITIONLEVEL of ACEMATT TS 100:
As supplied calculatedon total formulation: 1.5 - 4.5 %

PROCESSING INSTRUCTIONS of ACEMATT TS 100:
Addition tothecoating as suppliedor as a predilution ispossible.

Handling and Warnings of ACEMATT TS 100:
Recommendation: Mix Acematt as a paste in the appropriate solvent before use.

This Matting Agent, ACEMATT TS 100, is being sold by the transportation company to recover costs for an abandoned shipment.
Particularly suitable for systems wich are difficult to matt, for water-borne dispersion coatings and for finish coatings.  
ACEMATT TS 100 is Ideal for use in sensitive coating systems.

Classification: Silicon Dioxide
CAS No.: 112945-52-5
Other Names: flatting agent
MF: SiO2
EINECS No.: 231-545-4
Place of Origin: Germany
Grade Standard: Industrial Grade
Purity: SiO2 content 99.8%
Appearance: fine white powder
Application: all types of coating systems
Model Number: ACEMATT TS 100
Surface treatment: none
Particle size: 4um
Oil absorption: 360g/100g
Electrical conductivity: 80 uS/cm

Chemical Acematt TS 100
Other names : dioxosilane, axematt
Appearance: white powder
Packing: 10kg/bag
Origin: Germany
Application: Acematt TS 100 is widely used in the paint industry.

HANDLING &STORAGE of ACEMATT TS 100:
For details regardingour packagingoptions for thisproduct, please contact your local sales representative. 
ACEMATT TS 100 areinert and extremelystablechemically. 
However, duetotheir high specificsurface area, theycan absorb moistureand volatileorganiccompounds from thesurrounding atmosphere. 
Therefore, werecommend storing the products in sealed containers in a dry, coolplace, and removed from volatileorganicsubstances. 
Even if ACEMATT TS 100  is stored under these conditions, after a longer period it can stillpickup ambient moisture over time, which could lead toits exceeding thespecified moisture content. 
For this reason, our recommended use-bydateis 24 months after dateof manufacture. 
Products morethan 24 monthsold shouldbe tested for moisturecontentbeforeusein order to makecertain that it is still suitablefor theintended application.

Features of ACEMATT TS 100 
Good chemical resistance
Very high transparency
Highly efficient

Characteristics:
Matting agent - is characterized by excellent matting efficiency with maximum transparency.

Chemical description: Silicon dioxide, highly disperse amorphous, obtained by chemical means
Forms: powder
Solubility in water: > 1 mg/l

Other names: Silica, quartz
Appearance: white powder
Density: 2.2 g/cm3
Melting point: 1650(±75) °C
Boiling point: 2230 °C
Solubility in water: 0.012 g/100 mL
Molecular shape: linear (gas-phase)
Main hazards: inhalation of fine powders can damage the respiratory tract
Flash point: Non-flammable
Other anions: Silicon sulfide
Other cations: Carbon dioxide, Germanium dioxide, Tin dioxide
Lead dioxide
Related silicon oxides: Silicon monoxide
Related compounds: Silicic acid, "Silica gel"

Untreated matting powder produced by ACEMAT®TS 100 gas phase matting powder. 
The average particle size is: 9.5 μm d50 (laser diffraction method) with excellent extinction efficiency and extremely high transparency. 
Because of its unique production process, it is particularly suitable for all difficult-to-mat paint systems, water-based paints and topcoats. 
The use of ACEMATT ®TS100 can make the coating have good resistance to chemicals (household). 
Due to the high purity and low conductivity of the product itself, TS 100 is particularly suitable for use in coating systems that are more sensitive to this index. 
ACEMAT®TS 100 gas phase matting powder can also improve the fluidity and storage stability of powder coatings. 
CAS NO: 112926-00-8(ex7631-86-9)9002-88-4

Applications of ACEMATT TS 100
-Leather coatings
-Plastic coatings
-Wood coatings
-Automotive OEM coatings

Chemical name:
Silicon dioxide, chemically prepared
Other means of identification
CAS Number: 112945-52-5, 7631-86-9

Hazard Symbol: No symbol
Signal Word: No signal word.
Hazard Statement: Not applicable

Hydrophilya:
4–4.5 SiOH/nm2
7 μmol/m2
Particle size: MET: 11 ± 3 nm
BET: 12.5 ± 0.2 nm and 10 μm (D50 laser scattering)a
Densitya: 2 g/cm3
Specific surface (BET): 238 ± 2 m2/g

Inhalation: In case product dust is released: Possible discomfort: cough, sneezing Move victims into fresh air.
Skin Contact: Wash off with plenty of water and soap.
Eye contact: In case of contact, immediately flush eyes with plenty of water for at least 15 minutes or until all material has been removed. 
Obtain medical attention.
Ingestion: Clean mouth with water and drink afterwards plenty of water. 
After absorbing large amounts of substance / In case of discomfort: Supply with medical care.
Personal Protection for Firstaid Responders:
As in any fire, wear self-contained positive-pressure breathing apparatus, (MSHA/NIOSH approved or equivalent) and full protective gear.

Safe handling advice: Handle in accordance with good industrial hygiene and safety practice. 
If there is the possibility of skin/eye contact, the indicated hand/eye/body protection should be used. 
If workplace exposure limits are exceeded and/or larger amounts are released (leakage, spilling, dust) the indicated respiratory protection should be used.
Use with adequate ventilation.
Contact avoidance measures: No data available.
Hygiene measures: When using, do not eat, drink or smoke. Wash face and/or hands before break and end of work. 
To ensure ideal skin protection: use super fatted soaps and skin cream for skin care. Wash contaminated clothing before reuse.

ACEMATT TS 100 features excellent matting efficiency and transparency. 
Because of the unique manufactoring process, it is particularly suitable for systems wich are difficult to matt, for water-borne dispersion coatings and for finish coatings.
Use of ACEMATT TS 100 may provide coatings with outstanding resistance to household chemicals. 
Thanks to the high purity and the resulting low conductivity
ACEMATT TS 100 is ideal for use in sensitive coating systems.
ACEMATT TS 100 improves flow behavior and the storage stability of powder coatings.

Eye/face protection: Wear safety glasses with side shields. 
In case dusts are formed, wear close fitting protective goggles.
Skin Protection
Hand Protection: Additional Information: Use impermeable gloves.
Skin and Body
Protection:
A safety shower and eye wash fountain should be readily available. 
To identify additional Personal Protective Equipment (PPE) requirements, it is recommended that a hazard assessment in accordance with the OSHA
PPE Standard (29CFR1910.132) be conducted before using this product.
Respiratory Protection: A respiratory protection program that meets OSHA 1910.134 and ANSI Z88.2 or applicable federal/provincial requirements must be followed whenever workplace conditions warrant respirator use. 
NIOSH's "Respirator Decision Logic" may be useful in determining the suitability of various types of respirators.
Hygiene measures: When using, do not eat, drink or smoke. 
Wash face and/or hands before break and end of work. 
To ensure ideal skin protection: use super fatted soaps and skin cream for skin care. Wash contaminated clothing before reuse.

Steps to be Taken in Case
Material is Released or Spilled:
Use cautious judgment when cleaning spills. Small spills may be collected with absorbent material , such as clay or sand. 
Large spills should be diked and contained with absorbent materials. 
Flush area with water spray to remove residue. 
Dispose of flush legally.
Waste Disposal Methods: Dispose in accordance with local, state and federal regulations.

ACEMATT®TS 100 is an untreated matting powder produced by the gas phase method. 
The average particle size is: 9.5 μm d50 (laser diffraction method) with excellent extinction efficiency and extremely high transparency. 
Because of its unique production process, it is particularly suitable for all difficult-to-mat paint systems, water-based paints and topcoats. 
The use of ACEMATT ®TS100 can make the coating have good resistance to chemicals (household). 
Due to the high purity and low conductivity of the product itself, TS 100 is particularly suitable for use in coating systems that are more sensitive to this index. 
ACEMAT®TS 100 gas phase matting powder can also improve the fluidity and storage stability of powder coatings. 
CAS NO : 112926-00-8(ex7631-86-9)9002-88-4

Precaution to be Taken in
Handling and Storage:
Store at ambient temperatures in well ventilated area. 
Avoid sparks, open flames and extreme heat. Store separately from amine curing agents. 
Protect container from physical damage.
Other Precautions: Container, even those that have been emptied, can contain product residues. 
Handle in accordance with good industrial practices. 
Avoid prolonged or repeated contact with skin.
Wash with soap and water before eating, drinking, smoking, applying cosmetics, or using toilet facilities. 
Launder contaminate clothing before use.

Storage of ACEMATT TS 100:
Safe storage conditions: Take precautionary measures against static discharges.
Keep containers tightly closed in a dry, cool place.
Safe packaging materials: No data available.

TECHNICAL DATA:
Grindometervalue: 40 µm
particlesize, d50 9.5 µm
pH-value: 6.5
specific surfacearea(N2): 250 m²/g

KEY BENEFITS of ACEMATT TS 100:
-highlyefficient
-veryhigh transparency
-good chemical resistance

Skin Contact: Skin contact may result in irritation or chemical burn,
Eye Contact: Product can cause severe eye irritation, swelling and/or chemical burn.
Contact lenses should not be worn when working with this material.
Inhalation: Vapor is irritating to the upper respiratory system and mucous membranes.
Ingestion: Liquid causes damage to mucous membrane if swallowed.

Eyes: Flush eyes with generous amounts of water for a least 15 minutes. 
GET MEDICAL ATTENTION IMMEDIATELY.
Skin: Immediately wash skin with soap and water. 
Wash contaminated clothing before reuse.
Ingestion: If swallowed do not induce vomiting. 
Give large amounts of water or mild if available. 
Call a physician. Treatment based on judgment of the physician in response to reactions of the patient.

Product name: Acematt®TS100 pH, 5% solution 6 - 7 LOI, dried Subst, 2h, 1000oC % Max 2.5 APPLICATION - Acematt®TS100 can be used in water based paints, system paints Anti-UV water, cleaning paints, paints for leather and films especially coats. Paint formulations containing Acematt®TS100 demonstrate outstanding resistance to household chemicals. - Acematt®TS100 improves flow behavior and increases storage stability in powder coating
Chemical name: dioxosilane
Cas No.: 112945-52-5 (dioxosilane )
7631-86-9 (dioxosilane )
Molecular formula: SiO2
Origin: Evonik – Germany
Packing: 10kg/bag

TECHNICAL STANDARDS:
Item
(Test ietms) Standard
(Specification)
Appearance - White powder
N2 surface area, BET multip m2/g 225 - 275
Particle size, d 50) m 8 - 11
Moisture loss (loss on drying, 2h at 105oC) % Max 4.0

Respiratory Protection: 
Wear NIOSH approved respiratory protection where exposure limits are exceeded or in the absence of proper environmental control.
Ventilation: Use only with adequate ventilation. 
Local exhaust is recommended. 
Mechanical exhaust can be used as a back up system.
Protective Gloves: Chemical resistant gloves such as PVA.
Eye Protection: NIOSH approved safety glasses or goggles with side shields.
Other Protective
Clothing or Equipment:
Chemical resistant clothing as required to minimize skin contact.

Characteristic physico­ chemical data*)ACEMATT® TS 100CAS­No.112945­52­57631­86­9REACH (Europe)registered TSCA (USA)registered DSL (Canada)registered AICS (Australia)registered KECI (Korea)registered ENCS (Japan)registered PICCS (Philippines)registered IECS (China)registered NZIoC (New Zealand)registered Registrations ACEMATT® Matting agents are high performance silica developed for a variety of applications in Paints & Coatings.
Properties and applications ACEMATT TS 100 is an untreated thermal silica characterised by very high matting efficiency combined with very high transparency. 
Thanks to the unique properties, ACEMATT® TS 100 is particularly suitable for coating systems that are difficult to matt. 
ACEMATT TS 100 can be used in water­based coatings, waterborne UV coatings, clear coatings, coatings for leather and films, as well as all types of top coats. 
Coating formulations containing ACMATT® TS 100 show outstanding resistance against household chemicals.
Due to the high purity and extremely low electrical conductivity, ACEMATT® TS 100 is outstanding for applications in sensitive coating systems such as solder resist.
ACEMATT TS 100 improves flow behavior and increases storage stability in powder coatings.
Safety and handlingInformation concerning the safety of this product is listed in the corresponding Material Safety Data Sheet, which will be sent with the first delivery or upon updating. 
Such information is also available from Evonik Industries AG, Product Safety Department. 
We recommend to read carefully the material safety data sheet prior to the use of our product.
Packaging and storageOur products are inert and extremely stable chemically. 
However, due to their high specific surface area, they can absorb moisture and volatile organic compounds from the surrounding atmosphere. 
Therefore, we recommend to store the products in sealed containers in a dry, cool place, and removed from volatile organic substances. 
Even if ACEMATT TS 100 is stored under these conditions, after a longer period it can still pick up ambient moisture over time, which could lead to its exceeding the specified moisture content. 
For this reason, our recommended use­by date is 24 months after date of manufacture. 
Product more than 24 months old should be tested for moisture content before use in order to make certain that it is still suitable for the intended application.

Boiling Point: 260oC
Vapor Pressure: 20oC <1 mm Hg
Vapor Density (air=1) >1
Solubility in water: Moderate
Specific gravity (H2O=1) 0.98
Percent volatile by volume (%): 0%
Evaporation rate: ( =1): <0.01
Percent solid by weight (%): 100%
Appearance and odor: Light Straw Colored Liquid, Amine Odor

Flammable Limits: LEL Not Established UEL Not established
Extinguishing Media: Water, fog, foam, dry chemical, CO2
Special Fire
Fighting Procedures:
Do not enter confined fire space without full protective gear including a positive pressure, self-contained, NIOSH approved breathing apparatus. 
Cool fire exposed container with water.
Unusual Fire and
Explosion Hazard:
Container areas exposed to intense heat or flame should be cooled with H2O to prevent pressure build-up and/or weakening of container structure.

Stability: Stable
Conditions to Avoid: Avoid high temperatures, open flames and unscheduled contact with curing agents.
Incompatibility:
(Materials to Avoid)
Incompatible with strong oxidizing agents, strong acids and bases, secondary aliphatic amines and mercaptans.
Hazardous Decomposition
Products:
Carbon dioxide (CO2) Carbon Monoxide (CO), by products may include oxides of nitrogen (NOx ) when burned.
Hazardous Polymerization: Will not occur.
Conditions to Avoid: Avoid mixing resin and hardener in uncontrollable quantities.

Acematt TS 100 (Matting Additive) Highly effective matting additive without surface treatment. 
Differs in excellent matting effect and high transparency. 
Recommended for use in various types of difficult-matting systems, in varnishes and high-quality coatings, in the production of artificial leather. 
Main advantages - highly efficient - very high transparency - good chemical resistance Technical characteristics - Automotive conveyor coatings - Wood coatings - Plastic coatings Leather paints Application - water-based (soluble) - organic solvent-based (soluble) - radiation-cured (partially soluble) 

Appearance
Physical state: solid
Form: Powder
Color: White
Odor: Odorless
Odor Threshold: Not applicable
pH: approx. 6.5 (50 g/l, 20 °C) Suspension
Melting Point: approx. 1,700 °C
Boiling Point: not determined
Flash Point: Not applicable
Evaporation Rate: Not applicable
Flammability (solid, gas): Not applicable
Explosive limit - upper (%): Not applicable
Explosive limit - lower (%): Not applicable
Vapor pressure: Not applicable
Vapor density (air=1): Not applicable
Density: approx. 2.2 g/cm3 (20 °C) (DIN / ISO 787 / 10)
Relative density: No data available.
Solubility(ies)
Solubility in Water: > 1 mg/l
Solubility (other): No data available.
Partition coefficient (n-octanol/water): Not applicable
Self Ignition Temperature: Not applicable

physical state: solid
Colour: white
Form: powder
Odour: odorless
Odour: Threshold not applicable
pH ca.: 6.5 (50 g / l) (20 °C)
Method: DIN / ISO 787 / 9
(suspension)
Melting point/range ca.: 1700 °C
Boiling point/range: not determined
Flash point: not applicable
Evaporation rate: not applicable
Flammability (solid, gas): not applicable
Lower explosion limit: not applicable
Upper explosion limit: not applicable
Vapour pressure: not applicable
Vapour density: not applicable
Density ca.: 2.2 g/cm3 (20 °C)
Method: DIN / ISO 787 / 10
Water solubility: > 1 mg/l
Partition coefficient: 
noctanol/water
not applicable
Autoignition temperature: not applicable
Thermal decomposition: > 1700 °C
Viscosity, dynamic not applicable
 

  • Share !
E-NEWSLETTER