ARKOPAL N 095 is a nonionic surfactant for the chemical industry.
Structure of ARKOPAL N 095:
Nonylphenol polyglycol ether
(x = number of added-on molecules of ethylene oxide)
The first two digits indicate the approximate number of molecules of ethylene oxide forming the hydrophilic polyglcol ether chains.
The third digit indicates the concentration of the products (o = approx. 100 % active ingredient).
Characteristics of ARKOPAL N 095:
Both the chemical and processing characteristics of the ARKOPAL N grades depend largely on the ration of hydrophobic molecules (nonylphenol) to the hydrophilic – i.e. water solubilizing – polyglycol ether chain (number of ethylene oxide molecules).
Compatibility of ARKOPAL N 095:
Being nonionic, the ARKOPAL N grades are compatible with all other nonionic, anionic or cationic substances.
Electrolytes, for example neutral salts, alkalis and – to a lesser extent – acids, reduce the water solubility of the ARKOPAL N grades and may lead to their salting out, especially at high concentrations and temperatures.
Decomposition of the products does not occur.
For solutions containing high amounts of electrolytes, ARKOPAL N grades with with long polyglycol ether chains may be used because, being more hydrophilic, they are not so easily salted out.
Stability of ARKOPAL N 095:
The ARKOPAL N grades have excellent resistance to compounds that cause hard water, to metal salts, including those of heavy metals, acids, alkalis, reductive agents and oxidative agents based on peroxide.
With regard to oxidative agents giving off chlorine, the stability, as in the case of all polyglycol ether derivatives, is limited to the use of dilute solutions.
The preparation of highly concentrated mixtures of oxidative or reductive agents and polyglycol ether derivatives is not possible.
Solubility of ARKOPAL N 095:
In water:
The solubility in water increases with the length of the polyglycol ether chain.
ARKOPAL N 040 is practically water insoluble.
ARKOPAL N 060, on the other hand, gives cloudy solutions.
The other ARKOPAL N grades form clear, aqueous solutions at 20°C.
Dilution of the ARKOPAL N grades with water initially results in a significant increase in viscosity.
With the mean ethoxylation stages (ARKOPAL N 080 to ARKOPAL N 150), this increase in viscosity leads, in certain concentration rages (45 – 70%) to the formation of fairly stiff gels that are not readily diluted with cold water.
To avoid this gel formation, dilution and dissolving are best carried out by stirring the ARKOPAL N grades into warm water.
Gel formation can also be overcome by the addition of alcohols, glycols and other solubilizing agents as well as by addition of salt.
Stable dilutions of ARKOPAL N 060, which gives cloudy solutions with water, cannot be prepared with water alone withless than 40% active substance.
By using solubilizing agents, for example isopropyl alcohol, glycols or suitable anionic compounds, it is, however, possible to obtain clear, stable dilutions at low concentrations.
In organic solvents and oils:
In non-aqueous media, the solubility of the ARKOPAL N grades also depends on the degree of ethoxylation.
In aliphatic hydrocarbons, the solubility quickly decreases with increasing length of the polyglycol ether chain.
In mineral oil, petrolatum and paraffinic hydrocarbons, therefore, only the slightly hydrophilic products ARKOPAL N 040 and ARKOPAL N 060 are soluble.
In aromatic hydrocarbons, in alcohols, ketons and similar polar solvents, and in chlorinated hydrocarbons all ARKOPAL N grades are soluble.
Physical and Chemical Data of ARKOPAL N 095:
Cloud point of ARKOPAL N 095:
In contrast to the anionic compounds, the water solubility of the nonionic ARKOPAL N grades decreases with increasing temperature.
Aqueous solutions that are clear at room temperature become cloudy as soon as the temperature is raised to the so-called cloud point.
The cloud point increases with the length of the polyglycol ether chain and with the different ARKOPAL N grades.
Products with a high degree of ethoxylation, such as ARKOPAL N 230 and ARKOPAL N 300 do not show a cloud point in water up to boiling point.
By the addition of salts, such as sodium chloride, it is possible to depress the cloud point so that its determination is possible.
Clouding is a reversible physical process; the solutions clear as they cool.
The action of the ARKOPAL N grades is not adversely influenced, with a few exceptions, by the cloud point.
Therefore, in most cases they can be used even at temperatures above cloud point.
The cloud point is determind in water, 25% aqueous butyldiglycol solution and 10% sodium chloride solution.
Butyldiglycol serves as solubilizer and permits the determination of cloud points of products with a low degree of ethoxylation which are either insoluble in water or give cloudy solutions.
Surface-active characteristics; Like solubility, surface-active characteristics vary with the degree of ethoxylation.
Surface tension:
The maximum reduction in surface tension is achieved with ARKOPAL N 060.
As the degree of ethoxylation increases, so the action on the surface tension of water is reduced.
Dispersing action:
The values for lime-soap dispersion power established according to DIN 53309 indicate the excellent dispersing action of the ARKOPAL N grades.
They have, however, only limited application for other materials to be dispersed.
Wetting action:
The wetting action of ARKOPAL N grades also greatly depends on the degree of ethoxylation.
The most effective grades are ARKOPAL N 090 and ARKOPAL N 100.
Foaming power:
Being ethylene oxide derivatives, the ARKOPAL N grades are characterized by moderate to low foaming action.
Their foaming increases with the degree of ethoxylation but at no time reaches the foaming of other anionic compounds such as the alkylsulphates, alkylarylsulphonates etc.
Emulsifying action:
The excellent emulsifying action of a number of ARKOPAL N grades allows the preparation of stable emulsions.
The selection of the most suitable degree of ethoxylation depends on the type of oil or organic solvent to be emulsified and on any other components that may be dissolved in the oil or solvent.
The following ARKOPAL N grades are the most suitable for the various oils and solvents:
ARKOPAL N 040 to ARKOPAL N 060 for mineral oils, petrolatum and similar aliphatic hydrocarbons.
ARKOPAL N 080 to ARKOPAL N 130 for anionic hydrocarbons.
ARKOPAL N 090 to ARKOPAL N 150 for chlorinated hydrocarbons.
ARKOPAL N 230 to ARKOPAL N 300 for fatty acids (olein) and waxes.
By combining various ARKOPAL N grades, emulsifier mixtures for particular conditions can easily be prepared.
Mixtures of products whose degrees of ethoxylation vary greatly are frequently particularly effective.
Combinations with anionic of cationic products are also possible and are of advantage in many cases.
Storage of ARKOPAL N 095:
ARKOPAL N 095 can be stored for at least to 2 years in original sealed containers at room temperature under the recommended conditions.
Protect from exposure to cold during transport and storage.
The properties of ARKOPAL N 095 are reversibly altered by exposure to cold.
If ARKOPAL N 095 becomes turbid, tickens or freezes through exposure to cold, thaw slowly at room temperature and afterwards stir briefly.
Composition/information on ingredients:
Chemical characterization: Nonylphenol polyglycol ether.
Hazards identification of ARKOPAL N 095:
Harmful if swallowed.
Risk of serious damage to eyes.
Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
First Aid Measures of ARKOPAL N 095:
General Information of ARKOPAL N 095:
Remove soiled or soaked clothing immediately.
In any case show the physician the Safety Data Sheet.
After contact with skin:
In case of contact with skin wash off immediately with soap and water.
After contact with eyes:
In case of contact with eyes rinse thoroughly with plenty of water and seek medical advice.
After ingestion:
Summon a doctor immediately.
Properties of ARKOPAL N 095:
Concentration [%]: approx. 100
Appearance at 20°C: clear liquid
pH value (1% in water):
approx. 6 – 8 (Spain)
6.5 – 7.5 (Mexico)
Cloud point (1% in water) [°C]:
approx. 58.5 – 61.5 (Spain)
approx. 54.0 – 58.0 (Mexico)
Water (Karl Fischer method) [%]: max. 0.5
Form: Liquid, viscous
Colour: slightly yellowish
Odour: slight, original odour
Melting temperature: approx. 7 °C
Boiling point: not determined
Flash point: > 250 °C
Composition of ARKOPAL N 095:
Nonylphenol polyglycol ether with 9.5 EO
Further ARKOPAL N grades:
ARKOPAL N 040
ARKOPAL N 050
ARKOPAL N 060
ARKOPAL N 070
ARKOPAL N 080
ARKOPAL N 090
ARKOPAL N 100
ARKOPAL N 110
ARKOPAL N 120
ARKOPAL N 130
ARKOPAL N 150
ARKOPAL N 200
ARKOPAL N 208
ARKOPAL N 230
ARKOPAL N 238
ARKOPAL N 250
ARKOPAL N 300
ARKOPAL N 307
ARKOPAL N 308
Other Products:
EMULSOGEN EPN 118: Oxoalcohol ethoxylate with 11 EO
EMULSOGEN EPN 217: Oxoalcohol ethoxylate with 12 EO
EMULSOGEN EPN 287: Oxoalcohol ethoxylate with 13 EO
EMULSOGEN EPN 403: Oxoalcohol ethoxylate with 14 EO
EMULSOGEN EPN 407: Oxoalcohol ethoxylate with 15 EO
BRANCHED oxoalcohol et: Oxoalcohol ethoxylate with 16 EO
EMULSOGEN LCN 070: Branched oxoalcohol ethoxylate with 7 EO
EMULSOGEN LCN 088: Branched oxoalcohol ethoxylate with 8 EO
EMULSOGEN LCN 118: Branched oxoalcohol ethoxylate with 11 EO
EMULSOGEN LCN 158: Branched oxoalcohol ethoxylate with 15 EO
EMULSOGEN LCN 217: Branched oxoalcohol ethoxylate with 21 EO
EMULSOGEN LCN 287: Branched oxoalcohol ethoxylate with 28 EO
EMULSOGEN L 4050: Branched oxoalcohol ethoxylate with 40 EO
EMULSOGEN LCN 407: Branched oxoalcohol ethoxylate with 40 EO
GENAPOL X 050: Tridecyl alcohol ethoxylate with 5 EO About 100 % Liquid 59 – 62 (2)
GENAPOL X 060: Tridecyl alcohol ethoxylate with 6 EO About 100 % Liquid 64 – 66 (2)
GENAPOL X 080: Tridecyl alcohol ethoxylate with 8 EO About 100 % Liquid > 45 (1)
GENAPOL X 089: Tridecyl alcohol ethoxylate with 8 EO About 90 % Liquid > 45 (1)
GENAPOL X 150: Tridecyl alcohol ethoxylate with 15 EO About 100 % Waxy –
GENAPOL X 407: Tridecyl alcohol ethoxylate with 40 EO About 70 % Liquid –
GENAPOL X 1003: Tridecyl alcohol ethoxylate with 100 EO
GENAPOL X 1005: Tridecyl alcohol ethoxylate with 101 EO
EMULSOGEN X 4050: Tridecyl alcohol ethoxylate with 40 moles EO
GENAPOL 1879: Tridecyl alcohol ethoxylate
GENAPOL 3214: Tridecyl alcohol ethoxylate
GENAPOL GS 080 Blend of C12 – C20: alkyl ethoxylates with 8 EO
GENAPOL OX 080 C /C: oxoalcohol ethoxylate with 8 EO
GENAPOL OX 100 C12/C15: oxoalcohol ethoxylate with 10 EO
GENAPOL UD 050 C11: oxoalcohol ethoxylate with 5 EO
GENAPOL UD 070 C11: oxoalcohol ethoxylate with 7 EO
GENAPOL UD 079 C11: oxoalcohol ethoxylate with 7 EO
GENAPOL UD 110 C11: oxoalcohol ethoxylate with 11 EO
GENAPOL C 100 C/C : Saturated fatty alcohol About 100 % Pasty 89 – 92 (2)
GENAPOL C 200 C12/C18: Saturated fatty alcohol ethoxylate with 20
EMULSOGEN LA 3065: C12 /C14 fatty alcohol ethoxylate with 30 EO
GENAPOL LA 070 C12 /C14 fatty alcohol ethoxylate with 7 EO
GENAPOL LA 080 C12 /C14 fatty alcohol ethoxylate with 8 EO
GENAPOL LA 160 C12 /C14 fatty alcohol ethoxylate with 16 EO
EMULSOGEN 3896: Cetyl/oleyl alcohol ethoxylate with 20 EO
GENAPOL O 020: Cetyl/oleyl alcohol ethoxylate with 2 EO
GENAPOL O 080: Cetyl/oleyl alcohol ethoxylate with 8 EO
GENAPOL O 100: Cetyl/oleyl alcohol ethoxylate with 10 EO
GENAPOL O 200: Cetyl/oleyl alcohol ethoxylate with 20 EO
GENAPOL T 200: C16/C18 Fatty alcohol ethoxylate with 20 EO
GENAPOL T 250: C16/C18 Fatty alcohol ethoxylate with 25 EO
GENAPOL T 250 p: C16/C18 Fatty alcohol ethoxylate with 25 EO
GENAPOL T 500: C16/C18 Fatty alcohol ethoxylate with 50 EO
GENAPOL T 500 p: C16/C18 Fatty alcohol ethoxylate with 50 EO
GENAPOL T 800: C16/C18 Fatty alcohol ethoxylate with 80 EO
GENAPOL T 800 p: C16/C18 Fatty alcohol ethoxylate with 80 EO
SAPOGENAT T 040: Tributylphenol ethoxylate with 4 EO About 100 % Liquid 26 – 29 (2)
SAPOGENAT T 060: Tributylphenol ethoxylate with 6 EO About 100 % Liquid 53 – 56 (2)
SAPOGENAT T 080: Tributylphenol ethoxylate with 8 EO About 100 % Liquid 60 – 68 (2)
SAPOGENAT T 110: Tributylphenol ethoxylate with 11 EO About 100 % Liquid 42 – 44 (1)
SAPOGENAT T 130: Tributylphenol ethoxylate with 13 EO About 100 % Liquid 62 – 64 (1)
SAPOGENAT T 180: Tributylphenol ethoxylate with 18 EO About 100 % Waxy 61 – 64 (3)
SAPOGENAT T 300: Tributylphenol ethoxylate with 30 EO About 100 % Waxy –
SAPOGENAT T 500: Tributylphenol ethoxylate with 50 EO
ARKOPAL N 040: Nonylphenol ethoxylate with 4 EO About 100 % Liquid 36 – 38 (2)
ARKOPAL N 060: Nonylphenol ethoxylate with 6 EO About 100 % Liquid 61 – 63 (2)
ARKOPAL N 080: Nonylphenol ethoxylate with 8 EO About 100 % Liquid 32 – 34 (1)
ARKOPAL N 090: Nonylphenol ethoxylate with 9 EO About 100 % Liquid 52 – 54 (1)
ARKOPAL N 100: Nonylphenol ethoxylate with 10 EO About 100 % Liquid 62 – 65 (1)
ARKOPAL N 130: Nonylphenol ethoxylate with 13 EO About 100 % Liquid paste 83 – 86 (1)
ARKOPAL N 150: Nonylphenol ethoxylate with 15 EO About 100 % Pasty 92 – 95 (1)
ARKOPAL N 208: Nonylphenol ethoxylate with 20 EO About 80 % Liquid 70 – 73 (3)
ARKOPAL N 238: Nonylphenol ethoxylate with 23 EO About 80 % Liquid 73 – 75 (3)
ARKOPAL N 300: Nonylphenol ethoxylate with 30 EO About 100 % Waxy 76 – 78 (3)
ARKOPAL N 307: Nonylphenol ethoxylate with 30 EO About 70 % Liquid 76 – 78 (3)
ARKOPAL N 308: Nonylphenol ethoxylate with 30 EO About 80 % Waxy 76 – 78 (3)
ARKOPAL N 407: Nonylphenol ethoxylate with 40 EO –
GENAPOL X 050: Nonylphenol + 4 EO
GENAPOL X 060: Nonylphenol + 6 EO
GENAPOL X 080: Nonylphenol + 8 EO
EMULSOGEN LCN 118: Nonylphenol + 9 EO
EMULSOGEN LCN 118: Nonylphenol + 10 EO
EMULSOGEN LCN 118: Nonylphenol + 11 EO
EMULSOGEN LCN 115: Nonylphenol + 13 EO
EMULSOGEN LCN 217: Nonylphenol + 15 EO
EMULSOGEN LCN 217: Nonylphenol + 20 EO
EMULSOGEN LCN 217: Nonylphenol + 23 EO
EMULSOGEN LCN 287: Nonylphenol + 30 EO
EMULSOGEN LCN 407: Nonylphenol + 40 EO
EMULSOGEN 4084: EO-PO block polymer with 60 % EO About 100 % Waxy 26 – 29 (2)
GENAPOL PF 10: EO-PO block polymer with 10 % EO About 100 % Liquid 53 – 56 (2)
GENAPOL PF 20: EO-PO block polymer with 20 % EO About 100 % Liquid 42 – 44 (1)
GENAPOL PF 40: EO-PO block polymer with 40 % EO About 100 % Liquid 62 – 64 (1)
GENAPOL PF 80: EO-PO block polymer with 80 % EO About 100 % Waxy 61 – 64 (3)
GENAPOL PF 80 FP: EO-PO block polymer with 80 % EO
GENAPOL EP 0244: C10 /C12 fatty alcohol EO-PO About 100 % Liquid 35 – 38
GENAPOL EP 2424: C12 /C13 fatty alcohol EO-PO addition product
GENAPOL EP 2464: C12 /C14 fatty alcohol EO-PO addition product
GENAPOL EP 2544: C12 /C12 oxoalcohol EO-PO addition product
GENAPOL EP 2552: C12 /C13 oxoalcohol EO-PO addition product
GENAPOL EP 2564: C12 /C14 oxoalcohol EO-PO addition product
GENAPOL EP 2584: C12 /C15 oxoalcohol EO-PO addition product
GENAPOL BE 2410: C12 /C14 fatty alcohol ethoxylate 10EO
GENAPOL BE 2805: C12 /C18 fatty alcohol ethoxylate 5EO
GENAPOL BE 2810: C12 /C18 fatty alcohol ethoxylate 10EO
EMULSOGEN TS 100: Tristyrylphenol ethoxylate with 10 EO About 100 % Waxy 65 – 69 (2)
EMULSOGEN TS 160: Tristyrylphenol ethoxylate with 16 EO About 100 % Liquid 58 – 62 (1)
EMULSOGEN TS 200: Tristyrylphenol ethoxylate with 20 EO 55 – 60 (3)
EMULSOGEN TS 290: Tristyrylphenol ethoxylate with 29 EO 67 – 69 (3)
EMULSOGEN TS 540: Tristyrylphenol ethoxylate with 54 EO 72 – 74 (3)
EMULSOGEN TS 600: Tristyrylphenol ethoxylate with 60 EO –
GENAPOL BA 040 Benzyl alcohol ethoxylate with 4 EO
GENAGEN C 100: C12/C18 Coconut fatty acid ethoxylate with 10 EO
GENAMIN C 020: C8/C18 Coconut fatty amine ethoxylate with 2 EO
GENAMIN C 050: C8/C18 Coconut fatty amine ethoxylate with 5 EO
GENAMIN C 100: C8/C18 Coconut fatty amine ethoxylate with 10 EO
GENAMIN C 150: C8/C18 Coconut fatty amine ethoxylate with 15 EO
GENAMIN C 200: C8/C18 Coconut fatty amine ethoxylate with 20 EO
GENAMIN O 020 special: Oleyl amine ethoxylate with 2 EO
GENAMIN O 050 Cetyl/oleyl amine ethoxylate with 5 EO
GENAMIN O 080 Cetyl/oleyl amine ethoxylate with 8 EO
GENAMIN O 200 Cetyl/oleyl amine ethoxylate with 20 EO
GENAMIN S 020 Cetyl/stearyl amine ethoxylate with 2 EO
GENAMIN S 080 Cetyl/stearyl amine ethoxylate with 8 EO
GENAMIN S 100 Cetyl/stearyl amine ethoxylate with 10 EO
GENAMIN S 150 Cetyl/stearyl amine ethoxylate with 15 EO
GENAMIN S 200 Cetyl/stearyl amine ethoxylate with 20 EO
GENAMIN S 250 Cetyl/stearyl amine ethoxylate with 25 EO
GENAMIN T 020 Tallow fatty alkyl amine ethoxylate with 2 EO
GENAMIN T 100 Tallow fatty alkyl amine ethoxylate with 10 EO
GENAMIN T 150 Tallow fatty alkyl amine ethoxylate with 15 EO
GENAMIN 3920 Capryl amine ethoxylate with 2 EO
GENAMIN CH 020: Cyclo hexyl amine ethoxylate with 10 EO
EMULSOGEN EL 200: Castor oil ethoxylate with 20 EO
EMULSOGEN EL 360: Castor oil ethoxylate with 36 EO
EMULSOGEN EL 400: Castor oil ethoxylate with 40 EO
EMULSOGEN EL 540: Castor oil ethoxylate with 54 EO About 100 % Liquid 49 – 53 mg KOH/g
HOSTACERIN DGI Diglycerol diisostearate About 100 % Liquid 160 – 180 mg KOH/g
HOSTACERIN DGMS: Diglycerol monostearate About 100 % Pellets 160 – 180 mg KOH/g
HOSTACERIN DGSB: Diglycerol distearate ethoxylated with 4 EO
EMULSOGEN 4156: Ethoxylates sorbitane monolaurate with 20 EO
HOSTAPUR OS Liquid: C14/C16 alpha-olefin sulphonates, sodium salt
HOSTAPUR OSB: C14/C16 alpha-olefin sulfonate, sodium salt
HOSTAPUR SAS 30: C14/C17 Secondary alkane sulfonate, sodium salt
HOSTAPUR SAS 60: C14/C17 Secondary alkane sulfonate, sodium salt
HOSTAPUR SAS 93: C14/C17 Secondary alkane sulfonate, sodium salt
EMULSOGEN APS 100: Allyl polyoxyalkylene sulfate with
EMULSOGEN EPA 073: 4 PO and 10 EO, ammonium salt
EMULSOGEN EPA 078: Alkyl polyethylene glycol ethersulfate with 7 EO, sodium salt
EMULSOGEN EPA 1954: Alkyl polyethylene glycol ethersulfate with 7 EO, sodium salt
EMULSOGEN LA 033: C12/C14 alkyl sulfate, sodium salt
EMULSOGEN LA 083: C12/C14 alkyl polyethylene glycol ether- sulfate with 3 EO, ammonium salt
EMULSOGEN LCA 213: C12/C14 alkyl polyethylene glycol ethersulfate with 8 EO, ammonium salt
EMULSOGEN PF 20 S: Alcohol polyethylene glycol ether sulfate, ammonium salt with 21 moles EO
GENAPOL LRO Liquid: Polyalkylene glycol ethersulfate, ammonium salt
GENAPOL LRO Paste: C12/C14 alkyl polyethylene glycol ether ethersulfate with 2 EO, sodium salt
HOSTAPAL BV Conc.: C12/C14 alkyl polyethylene glycol ethersulfate with 2 EO, sodium salt
HOSTAPAL BV Liquid: Tributyl phenol polyethylene glycol ethersulfate with 7 EO, sodium salt
ZELIQUID LP 2: Tributyl phenol polyethylene glycol ethersulfate with 7 EO, sodium salt
EMULSOGEN SF 8 Diisooctyl sulfosuccinate, sodium salt
HOSTAPHAT CC 100: Cetyl phosphoric acid ester, acid form, mono/diester
HOSTAPHAT CK 100: Cetyl phosphoric acid ester, potassium salt, mono/diester
HOSTAPHAT MDAH: Mono-/di-2-ethylhexyl phosphoric acid ester, acid form
HOSTAPHAT 145: Oleyl polyoxethyl (5 EO) phosphoric acid mono/diester, acid form
HOSTAPHAT 1306 Isotridecyl polyoxethyl (6 EO) phos- phoric acid mono/diester, acid form
HOSTAPHAT KL 340 D: Lauryl polyethoxy (4 EO) phosphoric acid ester, sodium salt, mono/di/triester
HOSTAPHAT KW 340 D: Stearyl polyethoxy (4 EO) phosphoric acid ester, sodium salt, mono/di/triester
HOSTAPHAT MIT 080: Tridecyl polyethylen glycol ether phos- phoric acid ester (8 EO), acid form, about 80% mono ester
HOSTAPHAT OPS 30: Octane phosphonic acid dissolved in water
HOSTAPHAT OPS 75 E: n-Octane phosphonic acid + ethanol/water
HOSTAPHAT OPS 100: n-Octane phosphonic acid
EMULSOGEN CIO 050: Isooctyl polyoxethyl (5EO) acetic acid
EMULSOGEN CNO 080: n-Octyl polyoxethyl (8EO) acetic acid
EMULSOGEN COA 070: Oxo Alkyl polyoxethyl (7EO) acetic acid
EMULSOGEN COL 020: Oleyl polyoxethyl (2EO) acetic acid
EMULSOGEN COL 050: Oleyl polyoxethyl (2EO) acetic acid
EMULSOGEN COL 080: Oleyl polyoxethyl (2EO) acetic acid
EMULSOGEN COL 100: Oleyl polyoxethyl (2EO) acetic acid
EMULSOGEN DTC 070: Isotridecyl polyoxethyl (7EO) acetic acid
ARKOMON SO: Oleoyl sarkosin
MEDIALAN LD: Lauroyl sarcoside, Na salt
ARKOPON T 8015: Oleic acid methyl tauride, sodium salt
HOSTAPON CT Paste: Coconut fatty acid methyl tauride, Na salt
HOSTAPON SCI-65 G: Coconut fatty acid isethionate, Na salt, blend with 20% stearic acid
HOSTAPON SCI-85 G: Coconut fatty acid isethionate, Na salt
HOSTAPON TPHC Oleic acid methyl tauride, Na salt
Genagen LAA: Sodium amphoacetate
HOSTAPON CGN: N-Cocoyl glutamate, sodium salt
HOSTAPON SG: Sodium cocoyl glycinate