EMULSOGEN EPN 207

EMULSOGEN EPN 207 is used as nonionic emulsifier for the emulsion polymerization of monomers like acrylates, styrene-acrylates, styrene-butadiene and vinyl acetate.

Uses of EMULSOGEN EPN 207:

Industry Sector: 
Industrial Performance Chemicals.

Type of Use: 
Emulsifier for emulsion polymerisation.

Benefits of EMULSOGEN EPN 207:

The use of EMULSOGEN EPN 207 offers the following advantages:
Low VOC,
Free of alkylphenol ethoxylates (APEO),
Hazard label free,
Easy to handle,
FDA approved.

Performance in emulsion polymerization of EMULSOGEN EPN 207:
Reduces coagulation,
Maintains low viscosity of polymer emulsion at different shear rates,
Enhanced electrolyte stability,
Improved shelf life (high freeze thaw stability).

Handling and Storage of EMULSOGEN EPN 207:

Advice on Safe Handling:
Open and handle container with care.

Further Information on Storage conditions:
Sensitive to frost.
In case of the product becoming opaque, thickening or being frozen due to the effects of cold, allow to thaw slowly at room temperature. 
Stir briefly before use.

Hazardous Ingredients of EMULSOGEN EPN 207:
Fatty alcohol polyglycol ether 16 - 20 EO
Concentration: 70 %
Hazard symbols Xn
R phrases 22 

Hazards Identification of EMULSOGEN EPN 207:
EMULSOGEN EPN 207 is harmful if swallowed.
Risk of serious damage to eyes.

First Aid Measures of EMULSOGEN EPN 207:

General Information About EMULSOGEN EPN 207:
Remove soiled or soaked clothing immediately.

After contact with skin:
In case of contact with skin wash off immediately with soap and water.

After contact with eyes:
In case of contact with eyes rinse thoroughly with plenty of water and seek medical advice.

Fire-Fighting Measures of EMULSOGEN EPN 207:

Suitable extinguishing media:
Water spray jet,
Alcohol-resistant foam,
Carbon dioxide,
Dry powder.

Special hazards from EMULSOGEN EPN 207 itself, EMULSOGEN EPN 207 combustion products or from its vapours:

In case of fires, hazardous combustion gases are formed: 
Carbon monoxide (CO)

Special protective equipment for firefighting:
Use self-contained breathing apparatus.

After ingestion:
Summon a doctor immediately.

Accidental Release Measures of EMULSOGEN EPN 207:

Personal precautions:
Use respiratory protection if exposed to vapours/dust/aerosols.
Wear suitable personal protective equipment.

Environmental precautions:
Do not allow to enter drains or waterways

Methods for cleaning up/taking up:
Pick up with absorbent material (eg sand, sawdust). 
Rinse away rest with water.

Exposure controls/personal protection of EMULSOGEN EPN 207:

General protective measures:
Avoid contact with eyes and skin

Hand protection: 
Suitable protective gloves

Eye protection: 
safety glasses

Physical and Chemical Properties of EMULSOGEN EPN 207:
Form: Liquid
Colour: almost colourless
Odour: slight, original odour
Crystallization temperature: 10 - 15 °C
Boiling point: approx. 100 °C
Flash point: Not applicable
Ignition temperature: Not applicable
Self-ignition temperature: Not applicable
Lower explosion limit: Not applicable
Upper explosion limit: Not applicable
Vapour pressure: not determined
Density: 1,07 g/cm3 (20 °C)
Solubility in water: (20 °C) soluble, clear
pH value: approx. 7 (20 °C, 10 g/l)
Octanol/water partition:
coefficient (log Pow): Not applicable
Viscosity (dynamic): approx. 400 mPa.s (25 °C)

Identification of EMULSOGEN EPN 207:

Trade name:
EMULSOGEN EPN 207

Composition/information on ingredients of EMULSOGEN EPN 207:

Chemical characterization:
Fatty alcohol polyglycol ether

Other EMULSOGEN Products:
EMULSOGEN 4084
EMULSOGEN EL 200
EMULSOGEN EL 360
EMULSOGEN EL 400
EMULSOGEN EL 540
EMULSOGEN EPA 073
EMULSOGEN EPA 1954
EMULSOGEN EPN 118
EMULSOGEN EPN 207
EMULSOGEN EPN 217
EMULSOGEN EPN 287
EMULSOGEN EPN 403
EMULSOGEN EPN 207
EMULSOGEN LA 083
EMULSOGEN LCN 158
EMULSOGEN LCN 217
EMULSOGEN LP
EMULSOGEN M
EMULSOGEN PSP 123
EMULSOGEN SF 8
EMULSOGEN TS 100
EMULSOGEN TS 160
EMULSOGEN TS 200
EMULSOGEN TS 298
EMULSOGEN TS 400
EMULSOGEN TS 407
EMULSOGEN TS 600