Quick Search



Genapol 3214 is a nonionic emulsifier for emulsion polymerization. 
This colourless liquid is composed of alkyl polyethylene glycol ether in water. 
Genapol 3214 is a nonionic emulsifier for the chemical industry and is used as an emulsifier in oil/water systems and for emulsion polymerization.

Genapol 3214 is suitable for use in the production of polymer dispersions based on vinyl acetate and comonomers, acrylic esters and comonomers and butadiene/styrene latices. 
Genapol 3214 stabilizes the polymer dispersion during and after polymerization and prevents coagulation.

Function of Genapol 3214:
Nonionic emulsifier

Chemical Type of Genapol 3214:
Fatty alcohol ethoxylates

Applications of Genapol 3214:
Emulsion polymerization

First Aid Measures of Genapol 3214:

General Advice of Genapol 3214:
If medical attention is required, show this safety data sheet to the doctor.

If Inhaled:
If inhaled, move person to fresh air. 
If not breathing, give artificial respiration and consult a physician.

In Case of Skin Contact:
Wash affected area with soap and water. 
Consult a physician if any exposure symptoms are observed.

In Case of Eye Contact:
Immediately rinse eyes with plenty of water for at least 15 minutes. 
Consult a physician.

If Swallowed:
Never give anything by mouth to an unconscious person. 
Rinse mouth with water. 

Do NOT induce vomiting unless advised to do so by a physician or Poison Control Center. 
Seek medical attention.

Firefighting Measures of Genapol 3214:

Extinguishing Media:
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.

Special Hazards Arising from the Substance or Mixture:
Carbon oxides, Nitrogen oxides, Sulfur oxides

Advice for Firefighters:
Wear self contained breathing apparatus for fire fighting if necessary.

Further Information:
No data available.

Accidental Release Measures of Genapol 3214:

Personal precautions of Genapol 3214:
Wear respiratory protection. 
Avoid dust formation.
Avoid breathing vapours, mist or gas. 

Ensure adequate ventilation. 
personnel to safe areas. 
Avoid breathing dust.

Environmental precautions of Genapol 3214:
Prevent further leakage or spillage if safe to do so. 
Do not let product enter drains.
Method and materials for containment and cleaning up

Pick up and arrange disposal without creating dust. 
Sweep up and shovel. 
Keep in suitable, closed containers for disposal

Exposure Controls/Personal Protection of Genapol 3214:

Control Parameters:
Contains no components with established occupational exposure limits.

Exposure Controls of Genapol 3214:

Appropriate Engineering Controls:
A laboratory fumehood or other appropriate form of local exhaust ventilation should be used to avoid exposure.

Personal Protective Equipment of Genapol 3214:
All recommendations below are advisory in nature and a risk assessment should be performed by the employer/end user prior to use of this product. 
The type of protective equipment must be selected based on the amount and concentration of the dangerous material being used in the workplace.

Eye/Face Protection of Genapol 3214:
Safety goggles or face shield. 
All equipment should have been tested and approved under appropriate standards, such as NIOSH (US), CSA (Canada), or EN 166 (EU).

Skin Protection of Genapol 3214:
Gloves should be used when handling this material. 
Gloves are to be inspected prior to use. 

Contaminated gloves are to be removed using proper glove removal technique so that the outer surface of the glove does not contact bare skin. 
Dispose of contaminated gloves after use in compliance with good laboratory practices and local requirements.

  • Share !