Quick Search
CAS Number : 2634-33-5
Nipacide BIT 10 W is an in-can biocide based on BIT.
Nipacide BIT 10 W is a light color, 10% active, VOC free, water-based solution of 1,2-benzisothiazolinone.
Nipacide BIT 10 W is a low toxicity biocide developed for the complete in-can protection of water-based products.
Nipacide BIT 10 W is effective against a wide range of microorganisms including gram positive and gram negative bacteria, yeast and fungi.
Nipacide BIT 10 W should be the biocide of choice for products with pH >8 and production temperatures of >40 C.
Isothiazolinone. Acts as an in-can biocide based on BIT.
Has low VOC.
Used for water-borne decorative paints and pigment preparations.
Nipacide BIT 10 W is an in-can biocide based on BIT.
Nipacide BIT 10 W is a light color, 10% active, VOC free, water-based solution of 1,2-benzisothiazolinone.
Nipacide BIT 10 W is a low toxicity biocide developed for the complete in-can protection of water-based products.
Nipacide BIT 10 W is effective against a wide range of microorganisms including gram positive and gram negative bacteria, yeast and fungi.
Nipacide BIT 10 W should be the biocide of choice for products with pH >8 and production temperatures of >40 C.
Nipacide BIT10W is a light colour, 10% active VOC free water based solution of 1,2- benzisothiazolinone; Nipacide BIT10W is a low toxicity biocide developed for the complete in-can protection of water based products.
Nipacide BIT10W is effective against a wide range of microorganisms including gram positive and gram negative bacteria, yeast and fungi.
Microorganisms grow at a rapid rate and without use of the correct biocide, numbers can increase dramatically.
Example of the numbers of bacteria able to grow in products if left unpreserved:
Time = 0 mins 1
Time = 40 mins 4
Time = 3 hrs 1024
Time = 5 hrs 16,384
Time = 7 hrs 1,048,576
Time = 10 hrs 107,000,000,000
Time = 24 hrs 236,000,000,000,000,000,000,000
STANDARD FIVE CHALLENGE TEST METHOD: Bacterial Challenge Test:
Samples Tested: Flooring adhesive (SBR based)
INOCULUM:
The mixed Inoculum of bacteria used is as follows:
Bacteria
Pseudomonas aeruginosa
Alcaligenes faecalis
Proteus vulgaris
Escherichia coli
STANDARD FIVE CHALLENGE TEST METHOD: Fungal Challenge Test:
Samples Tested: Flooring adhesive (SBR based)
INOCULUM:
The mixed Inoculum of fungi and yeast used is as follows:
Fungi
Fusarium solani
Geotrichum candidum
Aspergillus terreus
Yeast
Rhodotorula rubra
Saccharomyces cerevisiae
Applications of Nipacide BIT 10 W:
Nipacide BIT10W is recommended for preservation of a wide range of applications including, water based, casein, animal bone based and PVA adhesives.
Polymer emulsions including, SBR latex, Polyvinyl acetate and acrylic.
Water based decorative paints, metal working fluids, Calcium Carbonate and Kaolin mineral slurries and concrete add-mixtures.
Nipacide BIT10W is one biocide in the range of biocides offering customers the option of a VOC free alternative.
Nipacide BIT10W is effective against a wide range of spoilage organisms and effective over a wide pH and temperature range.
Nipacide BIT 10 should be the biocide of choice for products with pH >8 and production temperatures of >40 C.
Chemical compatibility of Nipacide BIT 10 W:
Nipacide BIT10W is compatible with most raw materials used in the manufacture of industrial products.
Nipacide BIT10W compatibility should always be checked and evaluated before use.
Emulsion polymerization
Pigment preparation
Waterborne paints
Decorative paints
In-can preservation
In-Can degradation in paints, polymer and adhesives as a result of bacterial and fungal contamination, can result in:
Loss of viscosity
Gassing
Discoloration
Bad odors
Product splitting
Loss of adhesion
Production clean down and production down time
Benefits of Nipacide BIT 10 W:
Low VOC
Formaldehyde-free
pH stable from 2-12
Temperature stable up to 100°C
FDA approved for various applications
Bactericide
Fungicide
Product Function: Industrial biocide
Chemical Type: BIT
CAS Number : 2634-33-5
Regulations and approvals of Nipacide BIT 10 W:
FDA21 CFR 175.105 Indirect food additives: Adhesive and components of coatings-Adhesives
FDA21 CFR 176.170 Indirect food additives: Paper and paperboard components-Components of paperboard in contact with aqueous and fatty foods
FDA21 CFR 176.180 Indirect food additives: Paper and paperboard components-Components of paper and paperboard in contact with dry food.
FDA 21 CFR.300 Indirect food additives: Paper and paperboard components-Slimicides.
BFR Rec X1V Preservative for Polymer emulsions in food contact applications.
WGK Classification 2: water polluting
Technical Service of Nipacide BIT 10 W:
Nipacide BIT 10 W technical service staff is available to assist customers in the determination of the optimum use level of biocide required to fully protect their product.
A dedicated team of microbiologists are on hand at all time to assist customers with all technical inquiries relating to product protection.
Full microbiological efficacy testing is available.
Synonyms of Nipacide BIT 10 W:
1,2-benzisothiazol-3(2H)-one
Benzisothiazolinone, Benzisothiazolin-3-one, Benzisothiazolone
1,2-bencisotiazol-3(2H)-ona
1,2-Benzisothiazol-3(2H)-on
1,2-benzisothiazol-3-(2H)-ONE
1,2-Benzisothiazol-3(2H)-one
1,2-Benzisothiazol-3-one
1,2-benzisothiazole-3(2H)-one
1,2-Benzisothiazolin-3-one
1,2-Benzisothiazolone
1,2-Benzoisothiazol-3-one
1,2-Benzothiazoline-3-one
3-BENZISOTHIAZOLINON
3-Hydroxy-1,2-benzisothiazole
Apizas AP-DS
BENZISOTHIAZOL(1,2)-3(2H)-ONE
Benzisothiazolone
Benzo[d]isothiazol-3(2H)-one
Benzocil
Bestcide 200K
BIT
Canguard BIT
Denicide BIT
Denicide BIT 20N
Nipacide BIT
Nipacide BIT 20
Nuosept 485
Nuosept 491
Nuosept 495
Parmetol B 70
Proxel AB
Proxel BD
Proxel BD 20
Proxel BDN
Proxel CF
Proxel GXL
Proxel HL 2
Proxel LV-S
Proxel PL
Proxel Press Paste
Proxel Press Paste D
Proxel TN
Proxel XL 2
San-aibac AP
SD 202
SD 202 (bactericide)
Topcide 600
XBINX
