CAS NUMBER: 26530-20-1
EC NUMBER: 247-500-7
Acticide OTP 10 is an industrial microbiocide to be used for the protection of paint films (non-food contact use only), coatings adhesives, tackifiers, building materials including fillers, caulks, sealants, grouts (non-food contact), mastics, joint cements, spackling, stucco, and concrete admixtures and, solid/semi-solid household, consumer, industrial, institutional and janitorial products against attack by mildew.
Acticide OTP 10 can be added to those products formulated as concentrates which are in turn diluted for use at a level to ensure that the final use-dilution product will contain 0.045% to 0.65% Acticide OTP 10.
Acticide OTP 10 can be incorporated with most products at any stage in the manufacturing process.
Acticide OTP 10 is preferably added in the let-down stage during the manufacture of paints.
Acticide OTP 10 acts as an industrial microbiocide, algicide and fungicide. Used in architectural finishes and paper coatings.
Acticide OTP 10 is used in flexographic, gravure, screen and printing inks.
Acticide OTP 10 is recommended at a dosage rate of 0.2-0.8 % for inks, 35-245 ppm for electrodeposition paints and 48 ppm for wood coatings.
Acticide OTP 10 acts as a wet state industrial microbiocide.
Acticide OTP 10 is used in oil in water emulsions, paper coatings, inks and emulsion paints.
Acticide OTP 10 provides microbiological protection, particularly in alkaline systems.
The recommended dosage is 0.05-0.25% for paper coating compositions, emulsion paints and inks.
Acticide OTP 10 is approved for use in craft products.
Acticide OTP 10 is an in-box preservative that provides protection against bacteria, molds and yeasts, which have a wide range of microbiological activity with the synergistic activity of the mite + lice active ingredients in water-based products.
Acticide OTP 10 is especially preferred in production types with formaldehyde sensitivity.
Acticide OTP 10 maintains its effectiveness at higher pH and higher temperatures (80°C) than other in-box preservatives.
Acticide OTP 10 has a very broad spectrum of fungicidal and algicidal activity, including efficacy against the following microorganisms.
Acticide OTP 10 should be added late in the production cycle with good agitation.
When incorporating liquid products or preparing powdered materials containing Acticide OTP 10, shear should be kept as low as possible in order to maintain the protective properties of the product.
Prior to administration, Acticide OTP 10 must not be diluted or mixed with other chemicals to avoid adverse effects on the active substance.
Acticide OTP 10 is compatible with most types of raw materials subject to deterioration by microorganisms.
Acticide OTP 10 is a mixture of 1,2-benzisothiazolin-3-one (2.5%) and 2-methyl-4-isothiazolin-3-one (2.5%).
Acticide OTP 10 controls the growth of bacteria and fungi.
Acticide OTP 10 is used in water soluble and water dispersed adhesives such as animal glues, vegetable glues, natural rubber lattices, polyvinyl acetate, styrene-butadiene and acrylic lattices.
The recommended dosage is 1.0-5.0 lbs.
Acticide OTP 10 is a mixture of 1,2-benzisothiazolin-3-one (2.5%) and 2-methyl-4-isothiazolin-3-one (2.5%).
Acticide OTP 10 acts as an industrial microbiocide and algicide & fungicide.
Acticide OTP 10 controls the growth of bacteria and fungi.
Acticide OTP 10 is used in electrodeposition paints, architectural finishes, paper & wood coatings.
Acticide OTP 10 is also used in ink jets, flexographic, gravure, screen and printing inks.
Recommended dosage for inks is 0.1-0.5% on a total weight basis, 250 ppm for electrodeposition paints and 0.1-5.0 lbs for wood, paper & architectural coatings.
Acticide OTP 10 is an in-box preservative that prevents the formation of bacteria, mold and yeast.
Acticide OTP 10 is especially preferred in productions sensitive to formaldehyde.
Acticide OTP 10 is effective at high pH and temperatures (80°C) compared to other in-box preservatives.
Acticide OTP 10 is an oxazolidine based formaldehyde donor specifically developed for the primary and secondary preservation of aqueous metalworking fluids, cooling and lubricating emulsions, grinding fluids, construction chemicals and similar products.
Acticide OTP 10 is suitable for the wet state primary and secondary preservation of aqueous metalworking fluids, cooling and lubricating emulsions, grinding fluids, construction chemicals and similar products.
Normal end use concentrations are in the range 0.05 - 0.25%, depending on the product to be protected and the environmental conditions to which it will be exposed.
If added to concentrated products which are subsequently diluted before use, addition levels must be adjusted accordingly.
The precise level required by a specific formulation can be determined
Acticide OTP 10 can be added at any time during manufacture.
Acticide OTP 10 is advised to add it as early as possible to give protection to susceptible products throughout the production process.
Care should be taken to ensure that temperature and pH at the point of addition are suitable for stability of the product.
Prior to use Acticide OTP 10 must not be diluted or mixed with any other raw material to avoid negative influences on the active.
Acticide OTP 10 is not compatible with formaldehyde sensitive products but may be used in most other formulations in which its application is recommended.
Acticide OTP 10 is a biocide for industrial water treatment and for the production of preservative products.
Acticide OTP 10 is VOC-free, concentrated, isothiazolinone based for the wet-state preservation of formaldehyde and bivalent metal ion sensitive formulations.
Acticide OTP 10 can be used as a tankside additive for metalworking emulsions and other aqueous fluids.
Acticide OTP 10 may also be used for industrial water treatment, including cooling systems and papermaking and for the production of preservative formulations including those for the prevention of surface mould growth on timber, applied by vacuum impregnation.
Acticide OTP 10 is suitable for the wet-state preservation of a wide range of other aqueous products including paints, polymer emulsions, adhesives, ceramic glazes, fillers and sealants.
Acticide OTP 10 is an effective biocide against micro-organism in diesel fuel, gasoline and kerosene.
Acticide OTP 10 can be applied preventatively and correctively.
After using any biocide when experiencing a moderate to heavy micro-organism contamination, Acticide OTP 10 is essential to clean the debris out from the bottom of the fuel tank.
Acticide OTP 10 is formaldehyde donor, hydroxymethyl ureide based biocide, specifically developed for the primary and secondary preservation of aqueous metalworking fluids, cooling and lubricating emulsions, grinding fluids and similar products.
Acticide OTP 10 is not compatible with formaldehyde sensitive products but may be used in most other formulations in which its application is recommended.
Acticide OTP 10 is a glycol based chloromethyl/methyl isothiazolinone biocide for the wet state protection of a wide range of aqueous based formulations.
Acticide OTP 10 is a biocide for fuels, approved worldwide, even for aircraft.
Acticide OTP 10 has a long-lasting effect, but Acticide OTP 10 is sensible to use the correct amount of Acticide CMG for each bunkering.
Acticide OTP 10 is a solvent-based biocide, a blend of chloromethyl and methylisothiazolinone in glycol.
Acticide OTP 10 has good anticorrosion properties and provides protection.
Acticide OTP 10 is a solvent-based biocide, a blend of chloromethyl and methylisothiazolinone in glycol, recommended for non-aqueous or low-water-content systems that are susceptible to microbiological contamination.
Acticide OTP 10 has good anticorrosion properties and provides protection against microbiological degradation, as well as preventing residue formation in tanks and refineries, valves, etc.
Acticide OTP 10 is an effective biocide developed for the microbiological protection of water systems.
Acticide OTP 10 has a unique non-metal salts stabilizing system and is free of organic solvents and formaldehyde.
USES:
For the treatment of industrial circulating water, from the role of sterilization, is a broad range of sterilization preservatives, can effectively kill algae, bacteria and fungi.
The active single agent can be widely used in industrial cooling water, oil field back tank water, paper industry, pipeline, paint, paint, rubber and cosmetics, photographic film and washing products and other industries.
Less effective use, non-toxic and pollution-free, easy to mix in various formulations, wide range of PH, dilute the use of concentration, Acticide OTP 10 is easy to be biodegradable into non-toxic pollution.
PROPERTIES:
-Composition: bis-(5,51-dimethyl-1,3-oxazolidine-3-yl)
-Appearance: methane Clear, almost colourless liquid
-Odour: Characteristic
-Density (20oC): 1.040 – 1.072 g/ml
-pH value: 9.0 – 11.0
-Amine value: 580 – 600 mg/g
-Solubility: Fully soluble in water, most lower alcohols and glycols
-Stability in application: Fully soluble in water, most lower alcohols and glycols Stable over the pH range 3 - 10 and up to 80°C
STORAGE:
Acticide OTP 10 is corrosive to mild steel.
Do not store or transport in unlined metal containers.
SYNONYM:
Didecyl dimethyl ammonium chloride
Didecyldimethylammonium chloride
N-decyl-N,N-dimethyldecan-1-aminium chloride
DDAC
Quaternium 12
Arquad 10
Bardac 22
didecyl(dimethyl)azanium;chloride
1-Decanaminium, N-decyl-N,N-dimethyl-, chloride
didecyl dimethylammonium chloride
UNII-JXN40O9Y9B
DIDECYLDIMETHYLAMMONIUMCHLORIDE
N-Decyl-N,N-dimethyl-1-decanaminium chloride
JXN40O9Y9B
CHEBI:79935
Astop
Didecyl dimethyl ammonium chloride, 80% aqueous solution