PRODUCTS

ADIMOLL DO

Adimoll DO is a non-phthalate plasticizer with high lightfastness and low-temperature flexibility.
Adimoll DO is di-2-ethylhexyl adipate.
Adimoll DO acts as a plasticizer.
Adimoll DO exhibits low viscosity, which, in combination with its weak ability to solvate PVC, has a positive effect on the initial viscosity and storage stability of plastisols.

CAS Number: 103-23-1
EC Number: 203-090-1
IUPAC Name: Bis(2-ethylhexyl) hexanedioate
Chemical Formula: C22H42O4

Other names: BIS(2-ETHYLHEXYL) ADIPATE, 103-23-1, Di(2-ethylhexyl) adipate, Diethylhexyl adipate, Bis(2-ethylhexyl)hexanedioate, Octyl adipate, Bis(2-ethylhexyl) hexanedioate, Plastomoll DOA, Vestinol OA, Bisoflex DOA, Crodamol DOA, Effomoll DOA, Kodaflex DOA, Monoplex DOA, Truflex DOA, Adipol 2EH, Staflex doa, Uniflex doa, Reomol doa, Wickenol 158, Di-2-ethylhexyl adipate, Lankroflex DOA, Sansocizer DOA, Ergoplast ADDO, Plasthall DOA, Adimoll DO, Mollan S, Flexol A 26, Sicol 250, Hexanedioic acid, bis(2-ethylhexyl) ester, Rucoflex plasticizer doa, Jayflex DOA 2, Kemester 5652, Effomoll DA, Arlamol DOA, Hatcol 2908, WITAMOL 320, Adipic acid, bis(2-ethylhexyl) ester, Flexol plasticizer 10-A, Flexol plasticizer A-26, Morflex 310, Vistone A 10, Di-(2-ethylhexyl) adipate, Octyl adipate (VAN), Adipic acid di(2-ethylhexyl) ester, Effemoll doa, NCI-C54386, CCRIS 236, PX-238, HSDB 343, Bis-(2-ethylhexyl)ester kyseliny adipove, UNII-MBY1SL921L, EINECS 203-090-1, MBY1SL921L, K 3220, BRN 1803774, DTXSID0020606, CHEBI:34675, 1,6-bis(2-ethylhexyl) hexanedioate, NSC-56775, Bis-(2-ethylhexyl)ester kyseliny adipove [Czech], DTXCID40606, ADIPIC ACID BIS(2-ETHYLHEXYL) ESTER, EC 203-090-1, 4-02-00-01964 (Beilstein Handbook Reference), DI(2-ETHYLHEXYL) ADIPATE [IARC], DI-(2-ETHYLHEXYL)ADIPATE [MART.], BIS(2-ETHYLHEXYL)HEXANEDIOATE [HSDB], Bis-(2-ethylhexyl)ester kyseliny adipove (czech), DI(2-ETHYLHEXYL) ADIPATE (IARC), 203-090-1, DI-(2-ETHYLHEXYL)ADIPATE (MART.), Di2ethylhexyl adipate, DIACIZER DOA, Flexol plasticizer 10A, Flexol plasticizer A26, Bis(2ethylhexyl) adipate, di (2-ethylhexyl) adipate, Bis(2ethylhexyl) hexanedioate, PX238, DIETHYLHEXYL ADIPATE [INCI], Adipic acid, bis(2ethylhexyl) ester, Bis(2ethylhexyl)ester kyseliny adipove, Adipic acid, bis (2-ethylhexyl) ester, HEXANEDIOIC ACID, DI(2-ETHYLHEXYL) ESTER, 686-861-9, inchi=1/c22h42o4/c1-5-9-13-19(7-3)17-25-21(23)15-11-12-16-22(24)26-18-20(8-4)14-10-6-2/h19-20h,5-18h2,1-4h, DEHA, Di(2-ethylhexyl)adipate, BEHA, BIS(2-ETHYLHEXYL)ADIPATE, Dioctyl adipate (VAN), DOA, Hexanedioic acid bis(2-ethylhexyl) ester, Palatinol DOA, Monsanto DOA, Good-rite GP-223, Adipic acid di[2-ethylhexyl]ester, Hexanedioic acid, 1,6-bis(2-ethylhexyl) ester, MLS002152897, Adipic acid, bis-2-ethylhexyl ester, SMR001224508, Adipic acid-bis-2-ethylhexylester, Adipic acid di(2-ethylhexyl)ester, 2072051-04-6, CAS-103-23-1, keme ster 5652, USS 700, NSC 56775, AI3-28579, DOA Plasticizer, Bis(2-ethylhexyl) hexanedio ate, Jayflex DOA, Merrol DOA, Witcizer 412, Flexol A26, MFCD00009496, Adipic acid bis (2-ethylhexyl) ester, i-2-ethylhexyl adipate, cid_7641, NCIOpen2_007625, SCHEMBL27423, Hexadioic acid, dioctyl ester, Hexanedioc acid, dioctyl ester, CHEMBL1414950, BDBM74247, Adipic acid, bis-2-ethylhexyl ester 100 microg/mL in Acetone, Bis(2-ethylhexyl) adipate, 99%, NSC56775, Tox21_202231, Tox21_300564, Adipic acid, di(2-ethylhexyl) ester, Bis(2-ethylhexyl) adipate, >=99%, AKOS015903805, CS-W009768, DS-7125, FB62538, NCGC00091185-01, NCGC00091185-02, NCGC00091185-03, NCGC00091185-04, NCGC00254473-01, NCGC00259780-01, 70147-21-6, AC-15178, A0163, NS00008424, WLN: 4Y2 & 1OV4VO1Y4 & 2, Bis(2-ethylhexyl) adipate, >=97.0% (GC), Bis(2-ethylhexyl) adipate, analytical standard, Q412835, Bis(2-ethylhexyl) adipate, Selectophore(TM), >=99.0%, Adipic Acid Di(2-ethylhexyl) Ester;Adipic Acid Dioctyl Ester;Di(2-ethylhexyl) Adipate

Adimoll DO imparts good low-temperature resistance to suitably plasticized compounds, good light stability to PVC compounds.
Adimoll DO is compatible with polyvinyl chloride, polyurethane, rubbers, nitro- and ethyl cellulose, and polyvinyl acetate.

Product Applications of Adimoll DO:
Manufacturing of plastics
Plasticizers for polymeres
Polymer auxiliaries
PVC

Description of Adimoll DO:
Adimoll DO is a low-temperature-resistant plasticizer suitable for a large number of polymers, inclusive polyvinyl chloride (PVC), polyurethanes (PUR), rubbers, nitro- and ethyl cellulose, and polyvinyl acetate (PVAc).

Solubility:
Soluble in all common solvents; the solubility in cold water is low.

Typical Properties of Adimoll DO:
Property / Nominal Value / Unit
Refractive index nD20 / approx. 1.447/ #
Acid value / max. 0.1 / mg (KOH)/g
Color value, Hazen / max. 20 / #

Water content / max. 0.1 / %
Relative density at 25 °C / approx. 0.925 / g/cm³
Dissolution temperature / approx. 149 / °C
Viscosity at 20 °C / approx. 13 / mPa·s
Pour point / approx. -65 / °C

Applications of Adimoll DO:
Adimoll DO is a very good low-temperature resistance to suitably plasticized compounds; this effect is clearly noticeable even when Adimoll DO is used in combination with other plasticizers.
Adimoll DO is a very good light stability to PVC compounds.

It is particularly beneficial to use Adimoll DO when very good low-temperature resistance and light stability are required, together with high elasticity.
Adimoll DO is used for a wide range of articles based on polyvinyl chloride (PVC), acrylonitrile butadiene rubber (NBR), styrene-butadiene rubber (SBR), chloroprene rubber (CR), ethylene-vinyl acetate rubber (EVM), polyurethanes (PUR), and ethylene-propylene copolymers (EPM).

Adimoll DO is also compatible with polyvinyl butyral (PVB), nitrocellulose and ethyl cellulose, polystyrene and natural rubber.
Adimoll DO has a limited compatibility with cellulose acetate butyrate, cellulose propionate and polymethylmethacrylate.

Adimoll DO is used when regulations and recommendations governing food contacting applications need to be met.
More information is available on request.

Adimoll DO is a low-temperature-resistant plasticizer suitable for a large number of polymers, inclusive polyvinyl chloride (PVC), polyurethane (PU), rubbers, nitro- and ethyl cellulose, and polyvinyl acetate (PVAC).

Adimoll DO has a very good plasticizing effect when used with PVC, PU, PVAC, NBR and other polymers.
Adimoll DO has a low viscosity, which, in combination with its weak ability to solvate PVC, has a positive effect on the initial viscosity and storage stability of plastisols.

Adimoll DO has a good compatibility with PVB resins and other plasticizers used in the manufacture of PVB film.
Adimoll DO has a good compatibility with a large number of polymers.

Adimoll DO is used when regulations and recommendations governing food contacting applications need to be met.

Applications of Adimoll DO:
Adimoll DO imparts very good low-temperature resistance to suitably plasticized compounds; this effect is clearly noticeable even when Adimoll® DO is used in combination with other plasticizers.
Adimoll DO imparts very good light stability to PVC compounds.

Adimoll DO is particularly beneficial to use Adimoll® DO when very good low-temperature resistance and light stability are required, together with high elasticity.
Adimoll DO is used for a wide range of articles based on polyvinyl chloride (PVC), acrylonitrile butadiene rubber (NBR), styrene-butadiene rubber (SBR), chloroprene rubber (CR), ethylene-vinyl acetate rubber (EVM), polyurethane (PU), and ethylene-propylene copolymers (EPM).