Quick Search
CAS NUMBER: 255719-70-1
EC NUMBER: 920-337-5
Agitan P 803 is a blend of liquid hydrocarbons and polyglycols on an inorganic carrier.
Agitan P 803 is recommended for application in dry blends which are dissolved in water before application.
Agitan P 803 results in low foaming solutions, specifically aqueous pastes or masses with very low air content.
Agitan P 803 is designed for use in adhesives as a defoamer at a dosage range of 0.1-1%.
Agitan P 803 has a shelf life of 15 months.
Agitan P 803 is a white powder that is a blend of liquid hydrocarbons and polyglycols on an inorganic carrier.
Agitan P 803 has low foaming action and plastisizing properties and is commonly used for construction and industrial adhesives.
Normal dosage ranges from 0.1 to 1 % on finished product.
Agitan P 803 is recommended for application in dry blends which are dissolved in water before application.
The addition of Agitan P 803 results in low foaming solutions, specifically aqueous pastes or masses with very low air content.
In some mortar systems Agitan P 803 shows a plastisizing effect, meaning the spreading value is increased.
Agitan P 803 is ideal for jointless flooring compounds.
Handling of Agitan P 803 is convenient with respect to flowability, dusting and ease of incorporation.
An excellent powder defoamer specifically designed for use in construction materials.
Agitan P 803 is especially effective in thin sets and self-leveling formulations.
Agitan P 803 gives the mortar excellent flow properties even if the water/cement (w/c) ratio is low.
The quantity which needs to be added is considerably smaller than that of conventional plasticizers.
Quantities of 0.2 – 0.4 %, in relation to the amount of binder used, produce the desired liquefying effect.
Agitan P 803 is dependent on various parameters (e. g. the quality of cement used) and must therefore be determined beforehand by means of preliminary tests.
To reduce the air content of fresh mortar, Agitan P 803 is recommended formulating the product with 1 – 3 % of a standard commercial defoamer, e. g. Agitan P 803 When developing formulations producers should carry out their own careful tests since a large number of influences are involved in the manufacturing and processing of cement systems (e. g. compatibility with other ingredients, mixing procedures and water requirement) and we are unable to include them all in our own tests.
Agitan P 803 is with characters of easy dispersed, quickly anti-foamed, high stability, adaptability.
Agitan P 803 has better performance in bubble prohibition.
Agitan P 803 is able to defoam microbubbles in producing building materials and the mortar can has excellent durability and shear stability and strength.
Agitan P 803 is a mixture of liquid hydrocarbons and polyglycols on an inorganic carrier.
Agitan P 803 is recommended for use in dry mixes, which are dissolved in water before application.
The result is solutions with low foaming, especially aqueous pastes or masses with a very low air content.
Agitan P 803 is intended for use in adhesives as a defoamer in the dosage range of 0.1-1%.
Agitan P 803 has a shelf life of 15 months.
Agitan P 803 is a white powder containing about 40% ash. Hydrophobic product dispersible in water.
Agitan P 803 is recommended for use in dry mixes, which are diluted in water before use. With this product, solutions with little foaming and aqueous pastes or masses with very low air bubbles are obtained.
In some dry building mixes, Agitan P 803 shows a plasticizing effect, which means an increase in spreadability.
Agitan P 803 is ideal for seamless floor systems.
In some systems, there is an increase in setting time, but no effect on cure time.
The dosage of Agitan P 803 defoamer is 0.1 - 1.0% by weight of the final product.
Agitan P 803 is recommended way for concrete with additives to thousands of applications, mix and add the water Agitan P 803 add will make the solution very little bubble, especially the little water containing air oar or clods, its defoaming effect is very good.
In some powder in the system, such as: Agitan P 803 has characteristics of the flow.
Agitan P 803 implies that increases the function did not reduce the function of the defoaming.
Especially in the spell of wooden floor industry.
Agitan P 803 is very easy to use.
All of the powder system, such as powder coating, powder, plaster walls and concrete, and the cooperation degree of the product is quite good.
Agitan P 803 is not sensitive to temperature, but if stored in a 15 25 ℃ (room temperature) would be better.
During storage, Agitan P 803 is required in an airtight jar in order to prevent the evaporation of water, the retention time for the factory in the 12 months in the future.
Agitan P 803 is a white powder, ash » 33%, free-flowing powder, bulk density of which is 340 g/l, hydrophobic product, dispersible in water.
Agitan P 803 is an emulsion with excellent stability and defoaming persistency.
Agitan P 803 is miscible with water in all ratios.
Agitan P 803 is a liquid yellow-brown, turbid mixture of mineral oil and non-ionic surfactants (APEO-free).
Agitan P 803 is a defoamer for all common emulsion systems and has good control over foaming and aeration, good compatibility, efficiency and is effective over a wide range of pH and temperature values.
Agitan P 803 is commonly used in adhesives, printing inks and industrial and wood coatings.
USES:
-Self leveling compounds for building industry
-Thin sets for building industry
USAGE AREAS:
-Self compacting concrete,
-High performance concrete
-Precasting
-Architectural concrete
-Specially shaped concrete slabs
-Concrete containing fly ash or silica fume
-Blast furnace slag concrete
-Lightweight concrete
-Marine concrete
-Pumping concrete
APPLICATION:
-Joint fillers and putties
-Leveling compounds
-Screeds (cement and anhydride based)
-Gypsum
-Cement
-Mortars
-Powder paints
-Adhesives
ADVANTAGES:
-Produces extended slump life.
-Requires reduced dosages.
-Improves the flow properties of the cement mix by dispersing the particles and preventing re-agglomeration.
-Improves the rheological and mechanical properties of concrete such as workability, compressive and flexural strength, modulus of elasticity.
-Promotes usage of cementitious supplementary materials such as silica fume, fly ash and blast furnace slag .
FUNCTION:
-Filler & Extender
-Leveling Agent
BENEFITS:
-Well dispersed in mortar, good anti foaming character, quick speed when antifoaming.
-Small dosage with high efficient.
-Can control the bubble and make the mortar products Compact bright.
-Good Suitability with other material.
SPECIFICATION:
-Physical status: In powder
-Color: Pale pink
-Water solubilty: Complete
-Specific gravity: 0.45-0.6 g/cm3
-Consumption: As %0.2-%0.5 of the used binder weight
FEATURES:
-composed of modified polysiloxane, polyether,carrier and other compounding ingredients.
-Great defoaming and excellent foam suppressing.
-Stable effects in strong alkaline (pH 10.0-12.0) condition.
-Free-flowing, no visible foreign matter and obvious caking.
-Non-toxic and no damage
STORAGE:
Agitan P 803 is not sensitive to freezing.
For better handling, Agitan P 803 should be stored dry between 15 and 25 °C.
The minimum shelf life in closed containers is 15 months from the date of manufacture.
