Quick Search
Agnique CSO 20 is a renewable-content nonionic surfactant primarily employed as a general-purpose emulsifier and solubilizing agent in agricultural and industrial formulations.
Agnique CSO 20 is based on castor oil reacted with an average of approximately 20 moles of ethylene oxide, producing an amphiphilic liquid with both oil-compatible and water-compatible molecular regions.
Agnique CSO 20 supports emulsification, wetting, solubilization, interfacial stabilization, and formulation compatibility in emulsifiable concentrates, emulsion-in-water systems, oil dispersions, and related technical products.
CAS Number: 61791-12-6
EC Number: 500-151-7
Generalized Molecular Formula: C₅₇H₁₀₄O₉(CH₂CH₂O)n
Molecular Weight: Not represented by one fixed value because Agnique CSO 20 is a UVCB ethoxylated-natural-oil substance with an average ethoxylation distribution.
SYNONYMS:
Agnique CSO 20, Agnique® CSO-20, AGNIQUE CSO-20, Agnique CSO-20, Agnique CSO20, CSO 20, CSO-20, Agnique CSO 20, Agnique® CSO-20, Castor Oil Ethoxylate 20 EO, Ethoxylated Castor Oil 20 EO, Castor Oil + 20 EO, Castor Oil Polyethoxylate 20, Polyoxyethylene Castor Oil 20, Polyoxyethylene (20) Castor Oil, Polyoxyethylated Castor Oil 20, POE 20 Castor Oil, POE-20 Castor Oil, PEG-20 Castor Oil, Polyethylene Glycol 20 Castor Oil, Castor Oil Ethylene Oxide Condensate, Castor Oil Ethoxylation Product, Ethylene Oxide Adduct of Castor Oil, Castor Oil Alkoxylate, Castor Oil Polyoxyethylene Ether, Polyoxyethylene Castor Oil Ether, Ethoxylated Ricinoleic Triglyceride, Polyethoxylated Ricinoleic Triglyceride, Nonionic Castor Oil Surfactant, Nonionic Castor Oil Emulsifier, Castor Oil-Based Nonionic Emulsifier, Renewable Nonionic Emulsifier, Bio-Based Castor Oil Surfactant, Agricultural Castor Oil Emulsifier, Agrochemical Nonionic Emulsifier, General-Purpose Nonionic Emulsifier, Oil-in-Water Emulsifier, Emulsifiable-Concentrate Emulsifier, Emulsion-in-Water Emulsifier, Oil-Dispersion Emulsifier, Agricultural Formulation Surfactant, Pesticide Formulation Emulsifier, Crop-Protection Formulation Auxiliary, Technical Solubilizing Agent, Technical Wetting Agent, UVCB Castor Oil Ethoxylate, EC 500-151-7, EINECS 500-151-7, CAS 61791-12-6, Product Number 30530711
APPLICATIONS
Agnique CSO 20 serves as an efficient general-purpose nonionic emulsifier in agricultural formulations containing hydrophobic active ingredients and organic carrier phases.
Agnique CSO 20 lowers interfacial tension between the organic phase and water, thereby supporting the formation of finely divided emulsions.
Agnique CSO 20 promotes uniform distribution of dissolved active ingredients after a concentrated product is diluted in the spray tank.
Agnique CSO 20 provides formulation flexibility because its nonionic character allows combination with many anionic and additional nonionic surfactants.
Agnique CSO 20 functions as an emulsifier in emulsifiable-concentrate formulations designed to form oil-in-water emulsions during field dilution.
Agnique CSO 20 facilitates spontaneous or agitation-assisted dispersion of pesticide-containing organic phases into spray water.
Agnique CSO 20 contributes to smaller and more consistent oil droplets when the solvent, active ingredient, and emulsifier package are properly balanced.
Agnique CSO 20 supports concentrate stability and dilution performance across validated use concentrations and water qualities.
Agnique CSO 20 finds application in emulsion-in-water formulations containing a liquid organic phase dispersed within a continuous aqueous phase.
Agnique CSO 20 stabilizes the oil–water interface and helps reduce droplet coalescence during manufacturing and storage.
Agnique CSO 20 enables formulators to reduce dependence on highly volatile organic solvents by supporting water-containing product designs.
Agnique CSO 20 contributes to pourability, dilution behavior, droplet-size control, and active-ingredient distribution in properly designed emulsion systems.
Agnique CSO 20 serves as a surfactant component in oil-dispersion formulations containing solid active ingredients suspended in a hydrophobic continuous phase.
Agnique CSO 20 assists wetting of pesticide particles before dispersants and rheology modifiers establish long-term suspension stability.
Agnique CSO 20 supports controlled emulsification of the oil phase when the oil dispersion is subsequently diluted with water.
Agnique CSO 20 helps formulators balance particle wetting, oil compatibility, redispersibility, and spray-tank dilution performance.
Agnique CSO 20 functions as a co-emulsifier with calcium alkylbenzene sulfonates and other compatible anionic emulsifiers.
Agnique CSO 20 broadens the hydrophilic–lipophilic balance of combined emulsifier packages used in concentrated pesticide products.
Agnique CSO 20 contributes steric stabilization at the oil–water interface while the ionic component supplies electrostatic stabilization.
Agnique CSO 20 enables formulation developers to optimize spontaneous emulsification, emulsion fineness, hard-water tolerance, and storage stability.
Agnique CSO 20 serves as a nonionic emulsifier in herbicide formulations containing active ingredients with limited water solubility.
Agnique CSO 20 helps transfer the dissolved herbicidal active from an organic concentrate into a stable diluted spray emulsion.
Agnique CSO 20 supports uniform delivery by reducing uncontrolled oil separation during tank preparation and application.
Agnique CSO 20 provides technical value only when compatibility, crop selectivity, active solubility, and authorized use conditions have been confirmed.
Agnique CSO 20 functions as an emulsification component in insecticide concentrates based on hydrophobic active ingredients.
Agnique CSO 20 promotes distribution of the insecticidal oil phase throughout the spray mixture after dilution.
Agnique CSO 20 contributes to consistent dosing by helping maintain emulsion uniformity during agitation and application.
Agnique CSO 20 supports insecticide formulation development when the selected solvent and emulsifier package are compatible with the active ingredient.
Agnique CSO 20 finds application in fungicide formulations requiring a nonionic surfactant with useful oil–water interfacial activity.
Agnique CSO 20 facilitates incorporation of hydrophobic fungicidal compounds into emulsifiable concentrates and related liquid systems.
Agnique CSO 20 supports dilution stability across the water temperatures and hardness levels established during formulation testing.
Agnique CSO 20 helps maintain active distribution while biological performance remains dependent on the complete registered formulation.
Agnique CSO 20 serves as an emulsifier in acaricide formulations containing oil-soluble active substances.
Agnique CSO 20 helps disperse the concentrated organic phase into water without persistent floating oil or rapid phase separation.
Agnique CSO 20 contributes to spray-mixture consistency during treatment of foliage and other authorized target surfaces.
Agnique CSO 20 requires application-specific evaluation because solvent composition and active chemistry strongly influence emulsion behavior.
Agnique CSO 20 functions as a formulation aid in multi-active agricultural products containing more than one hydrophobic pesticide.
Agnique CSO 20 supports a shared organic phase capable of carrying compatible active ingredients at commercially useful concentrations.
Agnique CSO 20 contributes to uniform dilution when all active ingredients remain dissolved or appropriately dispersed during storage and use.
Agnique CSO 20 enables developers to investigate complex combination products through solubility, emulsion, crystallization, and biological testing.
Agnique CSO 20 finds application in solvent blends containing fatty acid methyl esters, dimethylamides, hydrocarbons, ketones, and other compatible agricultural carriers.
Agnique CSO 20 helps connect the organic solvent blend with the aqueous phase formed during spray-tank dilution.
Agnique CSO 20 allows solvent polarity and active solubility to be optimized independently from interfacial stabilization.
Agnique CSO 20 supports lower-volatility formulation concepts when combined with suitable high-boiling solvents and base oils.
Agnique CSO 20 serves as a solubilizing auxiliary for hydrophobic formulation ingredients that must remain uniformly distributed in a liquid product.
Agnique CSO 20 provides polyoxyethylene segments that interact with polar media and castor-oil-derived regions that interact with oils.
Agnique CSO 20 supports incorporation of fragrances, dyes, antifoams, stabilizers, and other compatible organic additives at controlled concentrations.
Agnique CSO 20 cannot prevent phase separation when the amount of hydrophobic material exceeds the solubilizing capacity of the complete system.
Agnique CSO 20 functions as a wetting aid for hydrophobic agricultural active-ingredient particles during premixing and milling.
Agnique CSO 20 helps displace air from particle surfaces and improves contact between solids and the surrounding liquid phase.
Agnique CSO 20 supports more efficient dispersion when used alongside a suitable polymeric or anionic dispersing agent.
Agnique CSO 20 contributes to reduced floating, improved incorporation, and more consistent particle-size reduction in validated processes.
Agnique CSO 20 finds application as an interfacial modifier in suspo-emulsions containing both suspended particles and emulsified liquid droplets.
Agnique CSO 20 helps stabilize the liquid–liquid interface while compatible dispersants protect the solid–liquid interface.
Agnique CSO 20 supports homogeneous dosing of multiple active ingredients with different physical forms.
Agnique CSO 20 enables formulation of complex systems only after particle interaction, droplet size, viscosity, and temperature stability have been verified.
Agnique CSO 20 serves as an emulsifier in microencapsulation processes requiring an organic internal phase dispersed in water.
Agnique CSO 20 supports formation of controlled droplets before the capsule wall is created around the active-containing phase.
Agnique CSO 20 contributes to initial emulsion stability during interfacial polymerization or other encapsulation procedures.
Agnique CSO 20 requires compatibility testing because excessive surfactant concentration may alter capsule size, wall formation, or release behavior.
Agnique CSO 20 functions as a processing surfactant during manufacture of pesticide granules and carrier-based products.
Agnique CSO 20 promotes uniform spreading of liquid active solutions across porous mineral or organic carriers.
Agnique CSO 20 supports subsequent water wetting when the finished granules are introduced into a spray tank.
Agnique CSO 20 helps manufacturers balance liquid loading, granule flow, drying, disintegration, and dilution behavior.
Agnique CSO 20 finds application in water-dispersible granule premixes requiring improved incorporation of hydrophobic ingredients.
Agnique CSO 20 supports active distribution during kneading, extrusion, spray granulation, or agglomeration.
Agnique CSO 20 contributes to faster water penetration into the granule after field dilution.
Agnique CSO 20 must be balanced with binders, dispersants, fillers, and disintegrants to avoid soft, sticky, or slowly dispersing granules.
Agnique CSO 20 serves as a wetting and emulsifying component in wettable-powder formulations.
Agnique CSO 20 helps powdered products penetrate the water surface instead of remaining as persistent floating agglomerates.
Agnique CSO 20 supports release and dispersion of hydrophobic active particles during spray-tank preparation.
Agnique CSO 20 enables wetting performance to be adjusted without relying entirely on strongly ionic surfactants.
Agnique CSO 20 functions as an in-can surfactant in selected agricultural concentrates requiring improved dilution robustness.
Agnique CSO 20 supports consistent emulsion formation after long storage when the formulation has retained chemical and physical integrity.
Agnique CSO 20 contributes to re-emulsification after temporary creaming if the system remains within its validated stability limits.
Agnique CSO 20 does not correct irreversible active crystallization, chemical degradation, or grossly incompatible formulation design.
Agnique CSO 20 finds application in formulation screening programs that compare alternative nonionic emulsifiers.
Agnique CSO 20 provides a castor-oil-based benchmark with approximately 20 moles of ethylene oxide.
Agnique CSO 20 enables comparison of emulsion fineness, cloud point, viscosity, water compatibility, foam, and temperature response.
Agnique CSO 20 supports systematic selection when evaluated at multiple concentrations and alongside different co-emulsifiers.
Agnique CSO 20 serves as a renewable-content surfactant in formulations seeking partial replacement of wholly petrochemical emulsifiers.
Agnique CSO 20 derives its hydrophobic triglyceride framework from castor oil while its polyoxyethylene chains originate from ethoxylation.
Agnique CSO 20 supports sustainability-focused product development without eliminating the need for performance and life-cycle assessment.
Agnique CSO 20 combines natural-oil-derived and synthetic structural elements rather than constituting a completely bio-based product.
Agnique CSO 20 functions as a nonionic emulsifier in industrial cleaning concentrates containing oily solvents or soil-removal ingredients.
Agnique CSO 20 helps distribute hydrophobic cleaning components throughout water during product dilution.
Agnique CSO 20 supports wetting of oily residues and contaminated surfaces through reduced interfacial tension.
Agnique CSO 20 requires foam, rinsing, substrate compatibility, and environmental performance to be assessed for the intended cleaner.
Agnique CSO 20 finds application in textile-processing formulations as an emulsifier for oils, lubricants, and hydrophobic treatment agents.
Agnique CSO 20 supports uniform distribution of process oils in aqueous baths.
Agnique CSO 20 contributes to fiber wetting and treatment consistency when compatible with dyes, salts, and auxiliaries.
Agnique CSO 20 enables stable preparation of selected spin-finish, scouring, dyeing, and finishing emulsions after application testing.
Agnique CSO 20 serves as an emulsifier in metalworking-fluid concentrates containing mineral oils, esters, corrosion inhibitors, and lubricity additives.
Agnique CSO 20 promotes formation of oil-in-water emulsions used during machining, grinding, forming, and related operations.
Agnique CSO 20 supports uniform lubricant delivery and heat-transfer performance when the complete fluid remains stable.
Agnique CSO 20 requires evaluation for foam, microbial stability, metal compatibility, hard-water tolerance, and residue formation.
Agnique CSO 20 functions as a surfactant in coating, ink, and adhesive formulations containing mixed aqueous and organic ingredients.
Agnique CSO 20 assists emulsification of compatible resins, plasticizers, oils, and functional additives.
Agnique CSO 20 promotes wetting of pigments and substrates when used at an appropriate concentration.
Agnique CSO 20 may influence gloss, water resistance, drying, foam, and adhesion, making complete formulation testing essential.
Agnique CSO 20 finds application as an emulsifier in emulsion-polymerization and latex-processing research.
Agnique CSO 20 supports dispersion of hydrophobic monomers or polymer particles in an aqueous continuous phase.
Agnique CSO 20 provides nonionic steric stabilization that can complement anionic surfactants and protective colloids.
Agnique CSO 20 enables evaluation of particle-size control, coagulum formation, electrolyte stability, and finished-latex performance.
Agnique CSO 20 serves as an emulsifying and solubilizing agent in technical formulations containing essential oils, fragrances, or botanical extracts.
Agnique CSO 20 helps disperse compatible lipophilic materials into water-rich systems.
Agnique CSO 20 supports development of clear, opalescent, or milky products depending on composition and concentration.
Agnique CSO 20 requires separate purity, toxicological, and regulatory qualification before use in personal-care, pharmaceutical, food, or feed applications.
DESCRIPTION
Agnique CSO 20 is a commercial product identified by product number 30530711.
The manufacturer identifies CAS Number 61791-12-6 for Agnique CSO 20.
The product is supplied as a liquid nonionic emulsifier and solubilizing agent.
Structurally, Agnique CSO 20 is based on the triglyceride framework naturally present in castor oil.
Castor oil contains predominantly ricinoleate-derived fatty chains with internal hydroxyl functionality available for ethoxylation.
Ethylene oxide addition produces polyoxyethylene chains distributed across available hydroxyl sites and related reaction products.
This distribution means Agnique CSO 20 is a UVCB substance rather than one uniform molecular species.
The generalized composition of ethoxylated castor oil may be represented as C₅₇H₁₀₄O₉(CH₂CH₂O)n.
For Agnique CSO 20, the value of n represents an average ethoxylation level near 20 rather than an identical chain length in every molecule.
Individual molecules can contain different numbers and distributions of oxyethylene units.
A single exact molecular formula and molecular weight are therefore not appropriate for the complete commercial substance.
Agnique CSO 20 contains hydrophobic fatty chains and comparatively hydrophilic polyoxyethylene regions within the same molecular population.
The castor-oil-derived regions associate with oils, solvents, waxes, and hydrophobic active ingredients.
The oxyethylene regions interact with water through dipolar and hydrogen-bonding interactions.
This amphiphilic structure enables Agnique CSO 20 to accumulate at interfaces and lower the free energy required to form emulsions.
Agnique CSO 20 is nonionic because its primary hydrophilic groups do not carry a permanent electrical charge.
Its nonionic character reduces direct sensitivity to calcium and magnesium compared with many strongly anionic surfactants.
Performance can nevertheless change in hard water because salts affect cloud point, co-emulsifiers, active ingredients, and interfacial packing.
Hard-water stability must therefore be tested with the complete formulation rather than assumed from surfactant class alone.
Agnique CSO 20 is generally supplied as a yellow liquid.
Archived agricultural-formulation literature reports approximately 100% active content and a density near 1.05 kg/L at 25°C.
The same literature reports a viscosity near 750 mPa·s at 25°C.
Current industrial product-range information reports approximately 110 mPa·s at 60°C, illustrating the strong decrease in viscosity with increasing temperature.
Agnique CSO 20 has an approximate cloud point of 66°C.
Method D uses 5 g of surfactant with 45 g of a 250 g/L diethylene glycol monobutyl ether solution.
The cloud point reflects reduced hydration and phase separation of the nonionic surfactant as temperature rises.
Cloud-point behavior can vary with electrolyte concentration, solvent composition, surfactant concentration, and test method.
Historical agrochemical literature reports an approximate HLB value of 10 for Agnique CSO 20.
An HLB near this level is consistent with use as a general-purpose oil-in-water emulsifier and co-emulsifier.
The current industrial product-range table does not publish an HLB value for the product.
Formulation performance should therefore be established through emulsion testing rather than selected exclusively by one historical HLB number.
Agnique CSO 20 is described as soluble in water in agricultural-formulation literature.
Its water compatibility results from the approximately 20-mole polyoxyethylene content attached to the castor-oil structure.
Diluted solutions may nevertheless become hazy or phase-separate near the cloud point or in the presence of high electrolyte levels.
Actual appearance depends on temperature, concentration, water quality, and other formulation ingredients.
agricultural-formulation literature reports a surface tension near 39 mN/m for a 1 g/L solution in distilled water at 23°C.
This reduction in surface tension supports wetting, spreading, and emulsification performance.
The value is a representative technical measurement rather than a universal result for every formulation.
Solvents, salts, co-surfactants, active ingredients, and test conditions can substantially change the observed surface tension.
Agnique CSO 20 has a reported flash point above approximately 150°C in archived agricultural-formulation information.
The comparatively high flash point reflects its high molecular size and low ambient volatility.
The product remains combustible and can decompose when exposed to severe heat or fire.
Ignition sources, overheating, and hot-surface contact should therefore be controlled during processing and storage.
Agnique CSO 20 has a reported freezing or congealing value near −16°C in archived agricultural literature.
Low-temperature storage can still increase viscosity and may alter clarity or pumping behavior before actual solidification occurs.
Cold material should be allowed to warm gradually under controlled conditions if handling becomes difficult.
Direct flame heating or excessive localized temperatures should never be used to restore fluidity.
Agnique CSO 20 is produced through controlled reaction of castor oil with ethylene oxide.
Industrial ethoxylation requires careful catalyst selection, temperature control, pressure control, and management of residual ethylene oxide.
The average degree of ethoxylation is adjusted to obtain the required balance between hydrophobicity and water compatibility.
Purification and finishing operations control residual catalyst, water, color, odor, acidity, and other product-quality parameters.
Agnique CSO 20 does not possess one sharply defined boiling point because it is a high-molecular-weight UVCB substance.
Its low vapor pressure means evaporation is limited under normal room-temperature conditions.
Heating can increase vapor, aerosol, and decomposition-fume exposure even when bulk evaporation remains slow.
Open processing at elevated temperatures therefore requires suitable local exhaust ventilation.
Agnique CSO 20 is generally stable under recommended storage and handling conditions.
Strong oxidizing agents should be avoided because they may react with the organic fatty and polyether structure.
Extended exposure to excessive heat, air, or contamination can contribute to discoloration, oxidation, odor change, or performance loss.
Severe thermal decomposition or combustion may generate carbon monoxide, carbon dioxide, aldehydes, and irritating organic fumes.
Agnique CSO 20 may foam when mixed, pumped, sprayed, or diluted with water.
Foam behavior depends on mechanical energy, concentration, temperature, electrolyte content, and the presence of other surfactants.
Excessive foam can interfere with tank filling, volume measurement, pumping, and manufacturing throughput.
Antifoam selection should be validated because some foam-control agents can destabilize emulsions or reduce wetting.
Agnique CSO 20 can be combined with anionic, nonionic, and selected amphoteric surfactants.
Compatible blends may improve spontaneous emulsification, droplet-size distribution, hard-water stability, and temperature tolerance.
Incompatible combinations may produce clouding, phase separation, excessive viscosity, precipitation, or reduced interfacial performance.
Laboratory screening should therefore include multiple surfactant ratios rather than assuming additivity.
Agnique CSO 20 is listed by the United States Environmental Protection Agency among commodity inert ingredients under the substance name castor oil, ethoxylated.
agricultural-formulation literature also associates the product with the applicable United States EPA polymer exemption framework in 40 CFR 180.960.
Regulatory acceptability still depends on the intended pesticide formulation, jurisdiction, concentration, and current legal requirements.
Supplier and regulatory documentation should be reviewed before inclusion in any registered commercial product.
Agnique CSO 20 quality control may include appearance, active content, water, color, viscosity, density, cloud point, acidity, and emulsification performance.
Values in brochures are representative and do not replace current batch-release limits.
Incoming material should be compared with the supplier’s certificate of analysis before controlled manufacturing.
The current Technical Data Sheet and regional Safety Data Sheet should take priority over historical catalogue information.
PROPERTIES
Product Name: Agnique CSO 20
Registered Trade Name: Agnique® CSO-20
Product Type: Nonionic emulsifier and solubilizing surfactant
Chemical Family: Ethoxylated natural oils
Chemical Nature: Castor oil reacted with approximately 20 moles of ethylene oxide
Substance Type: UVCB substance
CAS Number: 61791-12-6
EC Number: 500-151-7
Generalized Molecular Formula: C₅₇H₁₀₄O₉(CH₂CH₂O)n
Nominal Ethoxylation Level: Approximately 20 EO
Molecular Weight: No single fixed value
Physical Form at 23°C: Liquid
Appearance: Yellow liquid
Ionic Character: Nonionic
Representative Active Content: Approximately 100%
Representative Density at 25°C: Approximately 1.05 kg/L
Representative Viscosity at 25°C: Approximately 750 mPa·s
Representative Viscosity at 60°C: Approximately 110 mPa·s
Cloud Point: Approximately 66°C
Historical HLB Value: Approximately 10
Current Published HLB Value: Not stated in the cited industrial product-range table
Water Behavior: Soluble according to agricultural-formulation literature
Representative Surface Tension: Approximately 39 mN/m at 1 g/L in distilled water at 23°C
Flash Point: Greater than approximately 150°C
Representative Freezing Point: Approximately −16°C
Volatility: Low under normal ambient conditions
Primary Function: General-purpose nonionic emulsifier
Additional Functions: Solubilization, wetting, interfacial stabilization, compatibility support, and oil-phase dispersion
Primary Formulation Types: Emulsifiable concentrates, emulsion-in-water systems, and oil dispersions
Bio-Based Character: Partially bio-based because the hydrophobic structure is derived from castor oil
Biodegradability: Consult the current sustainability and regulatory documentation for the applicable product grade
EPA Commodity-Inert Listing: Castor oil, ethoxylated
EPA Regulatory Reference: Associated in literature with 40 CFR 180.960
Chemical Stability: Stable under recommended storage conditions
Hazardous Polymerization: Not expected during normal storage
Incompatible Materials: Strong oxidizing agents and other substances identified in the current Safety Data Sheet
Hazard Classification: Confirm from the current regional Safety Data Sheet
Transport Classification: Confirm from the current regional Safety Data Sheet
Hazardous Decomposition Products: Carbon monoxide, carbon dioxide, aldehydes, and irritating organic fumes
Recommended Storage: Original tightly closed container in a cool, dry, and well-ventilated location
Current Data Requirement: Confirm all release specifications against the latest Technical Data Sheet, Safety Data Sheet, and certificate of analysis.
FIRST AID
Inhalation:
Move the affected person to fresh air.
Keep the person at rest in a position comfortable for breathing.
Avoid further exposure to Agnique CSO 20 aerosol, mist, vapor, or thermal-decomposition fumes.
Obtain medical attention if coughing, headache, nausea, dizziness, throat irritation, or breathing discomfort develops or persists.
Skin Contact:
Remove contaminated clothing and footwear.
Wash the affected skin thoroughly with soap and plenty of water.
Continue rinsing if redness, irritation, or discomfort is present.
Obtain medical advice if symptoms persist or extensive exposure has occurred.
Wash contaminated clothing before reuse.
Eye Contact:
Rinse the eyes immediately with plenty of clean, gently flowing water.
Hold the eyelids open to ensure complete irrigation.
Remove contact lenses when present and easy to do, then continue rinsing.
Continue rinsing for at least several minutes.
Obtain medical attention if pain, redness, tearing, blurred vision, or irritation persists.
Ingestion:
Rinse the mouth thoroughly with water.
Do not induce vomiting unless directed by qualified medical personnel.
Never give anything by mouth to an unconscious or convulsing person.
Obtain medical advice if a significant quantity has been swallowed or symptoms develop.
Provide the product label and current Agnique CSO 20 Safety Data Sheet to medical personnel.
Note to Physicians:
No product-specific antidote should be assumed.
Provide supportive care and treat according to the patient’s symptoms and clinical condition.
Assess the respiratory tract, eyes, skin, and gastrointestinal system following significant exposure.
Consider all pesticide active ingredients, solvents, and other components when exposure involved a finished agricultural formulation.
Use the current regional Safety Data Sheet as the primary medical reference.
HANDLING AND STORAGE
Handling:
Handle Agnique CSO 20 in accordance with good industrial hygiene and chemical safety practices.
Review the current Technical Data Sheet and Safety Data Sheet before opening or processing the product.
Avoid unnecessary contact with the skin, eyes, and clothing.
Do not breathe aerosol, mist, vapor, or fumes generated during heating, spraying, or high-speed mixing.
Use closed or low-splash transfer systems wherever reasonably practicable.
Use clean and chemically compatible equipment for pumping, weighing, sampling, and transfer.
Control agitation to obtain uniform mixing without generating unnecessary foam.
Wash the hands, face, and exposed skin thoroughly after handling.
Do not eat, drink, or smoke in areas where Agnique CSO 20 is processed.
Keep containers tightly closed when the product is not being sampled or transferred.
Ventilation:
Provide adequate general ventilation in storage and processing areas.
Use local exhaust ventilation at heated vessels, mixers, drum openings, filling points, and sampling stations.
Control aerosols and vapors at their source rather than allowing them to spread throughout the workplace.
Provide additional ventilation when Agnique CSO 20 is heated, sprayed, atomized, or handled in confined spaces.
Use suitable respiratory protection when engineering controls cannot adequately limit exposure.
Select respiratory equipment through a documented workplace exposure assessment.
Ensure that exhaust systems comply with occupational and environmental requirements.
Storage:
Store Agnique CSO 20 in its original, tightly closed, and correctly labeled container.
Keep the product in a cool, dry, and well-ventilated location.
Protect Agnique CSO 20 from direct sunlight, excessive heat, uncontrolled freezing, and physical damage.
Keep Agnique CSO 20 separated from strong oxidizing agents and incompatible chemicals.
Prevent water, dirt, pesticide actives, acids, bases, and other contaminants from entering opened containers.
Carefully reseal partially used containers immediately after sampling or transfer.
Maintain the storage-temperature range specified in the current documentation.
Allow cold or highly viscous material to warm gradually before pumping.
Use controlled indirect heating only when permitted by the supplier.
Use first-in, first-out stock rotation within the stated shelf life.
Spill and Leak Procedures:
Restrict access to the affected area and remove unnecessary personnel.
Provide effective ventilation before beginning spill recovery.
Wear suitable gloves, protective clothing, eye protection, and respiratory protection as required.
Stop the source of the leak only when this can be done safely.
Prevent Agnique CSO 20 from entering drains, sewers, soil, groundwater, or surface water.
Recover pumpable liquid into suitable labeled containers whenever practicable.
Contain remaining material with sand, earth, vermiculite, or another compatible inert absorbent.
Collect recovered product and contaminated absorbent in tightly closed and correctly labeled waste containers.
Clean the affected surface thoroughly because residual surfactant can create a severe slipping hazard.
Prevent wash water containing concentrated Agnique CSO 20 from entering uncontrolled drainage systems.
Dispose of recovered material and cleaning residues through an authorized waste-management contractor.
Handling Precautions:
Wear chemical-resistant gloves selected from documented compatibility and permeation data.
Use safety glasses with side protection or tightly fitting chemical goggles.
Wear a face shield in addition to goggles where splashing is reasonably foreseeable.
Use protective clothing and footwear capable of limiting repeated skin contact.
Provide accessible eyewash and emergency-shower equipment near major handling areas.
Inspect pumps, hoses, valves, seals, gaskets, and heated transfer lines before use.
Use equipment capable of handling the product’s temperature-dependent viscosity.
Avoid uncontrolled high-speed mixing that may create excessive foam or aerosols.
Never use open flames or uncontrolled direct heating to reduce viscosity.
Keep ignition sources away from heated product, aerosols, and contaminated absorbent materials.
Review the current Agnique CSO 20 Technical Data Sheet, Safety Data Sheet, certificate of analysis, and applicable regulatory requirements before formulation, production, transport, storage, cleanup, or disposal.
