AGNIQUE SLES 370

Agnique SLES 370 is used in detergent production and toothpaste production.
Agnique SLES 370 can be used together with Sls or Sodium Lauryl Sulfosuccinate to increase auto foam. 
Agnique SLES 370 is used in the production of industrial cleaning chemicals used in the industrial industry.

Typical CAS Number: 9004-82-4 (Sodium Laureth Sulfate)
EC Number: Polymer-type / often listed as 221-416-0 (depending on ethoxylation degree)
Chemical family: Alcohol ethoxylate sulfate (anionic surfactant)
Molecular Formula: Variable (general formula: C₁₂–C₁₄H₂₅–(OCH₂CH₂)ₙ–OSO₃Na)
Molecular Weight: Variable (~350–500+ g/mol depending on EO units)

SYNONYMS:
Sodium laureth sulfate, SLES, Alcohol ethoxylate sulfate, Sodium lauryl ether sulfate, Ether sulfate surfactant

Agnique SLES 370 is a mixture, primarily composed of Sodium Laureth Sulfate (SLES) with ~70% active matter.
Agnique SLES 370 is generally defined as a surface active agent. 
Agnique SLES 370 and SLS (Sodium Lauryl Sulfate) have similar properties. 

However, SLS is more irritating than Agnique SLES 370. 
For this reason, Agnique SLES 370 was developed.
Agnique SLES 370 is an anionic surface active agent. 

Such surfactants reduce the surface tension of water. 
For this reason, Agnique SLES 370 reduces the amount of work required to create foam and increases the stability of the bubbles in it.
They are organic molecules with a water-hating end (hydrophobic) and a water-loving end (hydrophilic).

Agnique SLES 370 can be derived from coconut oil.
Agnique SLES 370 is a chemical that is used very intensively in the production of detergents and detergent derivatives.
The abbreviation of Agnique SLES 370 is Sodium Lauryl Ether Sulfate.

Agnique SLES 370 is a water-soluble chemical.
Agnique SLES 370 is a high-active anionic surfactant based on sodium laureth sulfate, widely used in detergents, personal care, and industrial formulations. 
Agnique SLES 370 is produced by ethoxylation of fatty alcohols followed by sulfation and neutralization. 

This structure of Agnique SLES 370 provides a balance between strong detergency and improved mildness compared to non-ethoxylated sulfates.
Agnique SLES 370 is the anion surfactant that is obtained by caustic soda neutralization of direct sulfated Natural Fatty Alcohol of C12,C14 chain lengths containing 3EO mole Ethylene Oxide. 
Agnique SLES 370 can exhibit the outstanding cleansing power, foaming ability, low irritant and also show a very stable properties in the hard water. 

USES and APPLICATIONS of AGNIQUE SLES 370:
Industries & Applications of Agnique SLES 370: Industrial Formulators, Agrochemicals / Additives for crop protection.
Agnique SLES 370 provides foaming of the produced material due to its chemical properties.
Uses and Applications of Agnique SLES 370: Household detergents and cleaners, Shampoos and personal care products, Liquid soaps and body washes, Industrial cleaning formulations, 

Agrochemical adjuvants (wetting and spreading agent), Textile and leather processing.
Agnique SLES 370  is ideal for use in shampoos, hand soaps, baby products, and body washes.
Agnique SLES 370 is used as a surface active agent that provides cleaning properties in detergent production. 

Agnique SLES 370's hydrophilic and hydrophobic properties are beneficial properties in detergents. 
If Agnique SLES 370 is used in the manufacturing process, polar water molecules are repelled by non-polar hydrocarbon molecules. 
This situation is defined by hydrophobic properties.

Agnique SLES 370 is used in detergent production and toothpaste production.
Agnique SLES 370 can be used together with Sls or Sodium Lauryl Sulfosuccinate to increase auto foam. 
Agnique SLES 370 contributes to foam increase thanks to its modification in this way.

Agnique SLES 370 is used in the production of industrial cleaning chemicals used in the industrial industry.
Surfactant is used in the production of skin care creams in the cosmetics sector.
Agnique SLES 370 is used to create foam and viscosity in shampoos containing low pH products and personal care products (Bubble Bath, shaving cream, ointment and sometimes toothpastes).

Agnique SLES 370 is used in the textile printing and dyeing industry.
In the field where mechanized tunnel boring machines are used, Agnique SLES 370 is processed as a lubricant and foaming agent.
Agnique SLES 370 is used as a surface active agent in the production of solvent-based detergents.

Agnique SLES 370 is used as a lubricant chemical substance in the petroleum and leather industries.
Agnique SLES 370 is used in the production of hand washing soaps.
In the production of liquid carpet shampoos, the form used together with compounds such as Sodium Acid Pyrophosphate and Sodium Metasilicate stands out as Sodium Lauryl Sulfate (SLS).

Agnique SLES 370 is used with pure water, EDTA and calcium chloride to make bubble toys foam. 
The amount of Agnique SLES 370 and the amount of pure water are used in the same ratio.
Agnique SLES 370 is used to create foam in the carpet sector.

Its derivative used as an anionic surface active agent in toothpaste production is SLS (Sodium Lauryl Sulfate).
Pesticides are very harmful chemicals for nature. 
For this reason, studies are being carried out on the production of pesticides that harm nature less. 

Agnique SLES 370 is used in the production of pesticides that are less harmful to the environment. 
Agnique SLES 370 is used together with Sodium Triphosphate and Sodium Bisulfate in the production of detergents. 
Agnique SLES 370 is used more than both of them as an active ingredient.

USES, BENEFITS, AND CHARACTERISTICS of AGNIQUE SLES 370:
Agnique SLES 370 is extensively used as a primary surfactant in cleaning and personal care formulations due to its excellent balance between cleaning efficiency and foaming performance. 
In detergents and shampoos, Agnique SLES 370 provides strong removal of oils, dirt, and particulate matter while generating rich, stable foam that enhances user perception of effectiveness. 
Compared to non-ethoxylated sulfates, Agnique SLES 370 offers improved mildness, making it more suitable for skin and hair contact applications when properly formulated. 
In industrial and agrochemical systems, Agnique SLES 370 functions as a wetting and dispersing agent, improving the distribution of active substances and enhancing overall formulation performance. 

One of its key advantages is its versatility, as Agnique SLES 370 can be combined with nonionic and amphoteric surfactants to tailor properties such as viscosity, foam profile, and irritation potential. 
Additionally, Agnique SLES 370's biodegradability and relatively favorable environmental profile make it widely accepted in modern formulations. 
Its strong surface activity, cost efficiency, and formulation flexibility make Agnique SLES 370 one of the most commonly used surfactants globally.

PHYSICAL and CHEMICAL PROPERTIES of AGNIQUE SLES 370:
Agnique SLES 370 is a chemical with different viscosity depending on its density in solution. 
Agnique SLES 370 has a liquid and semi-fluid consistency. 
In winter months, its viscosity increases due to ambient temperature. 

In other words, Agnique SLES 370's fluidity decreases. 
Agnique SLES 370 is light yellow and liquid.
Agnique SLES 370's melting point is -2 °C.

The boiling point of Agnique SLES 370 is 100 °C.
Interestingly, Agnique SLES 370 boils at the same temperature as water. 
But Agnique SLES 370's melting point changes according to its density in solution.

Agnique SLES 370's flash point is 94 °C.
Agnique SLES 370 is stable under normal conditions.
Agnique SLES 370 is a basic chemical when evaluated as acidic or basic.

Agnique SLES 370's density is 1.03 gr/cm3.
Agnique SLES 370 has very good solubility in water. 
Agnique SLES 370 dissolves in Ethyl Alcohol and Methyl Alcohol.

Agnique SLES 370 is a more viscous liquid than water.
Agnique SLES 370 has a pH of 6.5-8.5 in its 70% concentration form.

Agnique SLES 370 is a bit difficult to work with this chemical in winter months. 
Agnique SLES 370 is formed due to air temperatures. 
To prevent this, Agnique SLES 370 will come to a semi-fluid form as a result of being stored in an area at room temperature.

ADDITIONAL CHARACTERISTICS of AGNIQUE SLES 370:
*Excellent detergency and cleansing ability
*High foaming and foam stability
*Improved mildness compared to SLS (due to ethoxylation)
*Good compatibility with nonionic and amphoteric surfactants
*Biodegradable (under aerobic conditions)

PHYSICAL AND CHEMICAL PROPERTIES of AGNIQUE SLES 370:
Agnique SLES 370 is a concentrated aqueous solution of sodium laureth sulfate, typically appearing as a viscous, pale yellow liquid with high foaming capacity and excellent water solubility. 
Agnique SLES 370's chemical structure consists of a hydrophobic fatty alcohol chain that has been ethoxylated and subsequently sulfated, resulting in a molecule with both hydrophilic and hydrophobic segments. 
In aqueous solution, Agnique SLES 370 dissociates into negatively charged ions, enabling strong surface activity and efficient reduction of surface tension. 

The degree of ethoxylation influences properties such as solubility, mildness, and foam characteristics. 
Agnique SLES 370 is stable under neutral to mildly alkaline conditions but can undergo hydrolysis in strongly acidic environments. 
Agnique SLES 370's viscosity is highly dependent on concentration and electrolyte content, which is often adjusted in formulations to achieve desired rheological properties.

PHYSICAL and CHEMICAL PROPERTIES of AGNIQUE SLES 370:
Molecular Formula (Sles (Sodium Laureth Sulfate)); CH3(CH2)10CH2(OCH2CH2)nOSO3Na
Molecular Weight; 496.699 g/mol
Chemical Name; Sodium Lauryl Ether Sulfate
CAS Number; 68585-34-2
Chemical family: Alcohol ethoxylate sulfate (anionic surfactant)
Typical CAS Number: 9004-82-4 (Sodium Laureth Sulfate)
EC Number: Polymer-type / often listed as 221-416-0 (depending on ethoxylation degree)
Molecular Formula: Variable (general formula: C₁₂–C₁₄H₂₅–(OCH₂CH₂)ₙ–OSO₃Na)
Molecular Weight: Variable (~350–500+ g/mol depending on EO units)

Physical state: Viscous liquid or paste
Color: Colorless to pale yellow
Odor: Mild characteristic
Density: ~1.05 g/cm³
Viscosity: High (especially at high active concentration)
Solubility:
Completely soluble in water
pH (aqueous solution): ~6.5–9.5

Foaming: Very high, stable foam
Cloud point: Depends on ethoxylation degree
Type: Anionic surfactant
Functional groups: Sulfate ester (–OSO₃⁻), ethoxylate chains
Charge: Negatively charged in aqueous solution
HLB value: High (strongly hydrophilic)
Reactivity:
Stable under neutral and mild alkaline conditions
Hydrolyzes under strong acidic conditions
Electrolyte sensitivity: Moderate (viscosity changes with salt content)

FIRST AID MEASURES of AGNIQUE SLES 370:
-Description of first-aid measures
*General advice:
Show this material safety data sheet to the doctor in attendance.
*If inhaled:
After inhalation: 
Fresh air.
*In case of skin contact: 
Take off immediately all contaminated clothing. 
Rinse skin with
water/ shower.
*In case of eye contact:
After eye contact: 
Rinse out with plenty of water. 
Call in ophthalmologist. 
Remove contact lenses.
*If swallowed:
After swallowing: 
Immediately make victim drink water (two glasses at most). 
Consult a physician.
-Indication of any immediate medical attention and special treatment needed.
No data available

ACCIDENTAL RELEASE MEASURES of AGNIQUE SLES 370:
-Environmental precautions:
Do not let product enter drains.
-Methods and materials for containment and cleaning up:
Cover drains. 
Collect, bind, and pump off spills. 
Observe possible material restrictions. 
Take up dry. 
Dispose of properly. 
Clean up affected area.

FIRE FIGHTING MEASURES of AGNIQUE SLES 370:
-Extinguishing media:
*Suitable extinguishing media:
Carbon dioxide (CO2) 
Foam 
Dry powder
*Unsuitable extinguishing media:
For this substance/mixture no limitations of extinguishing agents are given.
-Further information:
Prevent fire extinguishing water from contaminating surface water or the ground water system.

EXPOSURE CONTROLS/PERSONAL PROTECTION of AGNIQUE SLES 370:
-Control parameters:
--Ingredients with workplace control parameters:
-Exposure controls:
--Personal protective equipment:
*Eye/face protection:
Use equipment for eye protection. 
Safety glasses
*Body Protection:
protective clothing
*Respiratory protection:
Recommended Filter type: Filter A 
-Control of environmental exposure:
Do not let product enter drains.

HANDLING and STORAGE of AGNIQUE SLES 370:
-Conditions for safe storage, including any incompatibilities:
*Storage conditions:
Tightly closed. 
Dry.

STABILITY and REACTIVITY of AGNIQUE SLES 370:
-Chemical stability:
The product is chemically stable under standard ambient conditions (room temperature).
-Possibility of hazardous reactions:
No data available