CAS Number: 108-65-6
Chemical Formula: C6H12O3
Molecular Weight: 132.158
Average Mass: 132.158 Da
ARCOSOLV PMA is 1-methoxy-2-propanol acetate.
ARCOSOLV PMA acts as a solvent.
ARCOSOLV PMA is a colorless, liquid with low toxicity.
ARCOSOLV PMA exhibits very good solvency for a variety of substances including acrylic, nitrocellulose and urethane coating resins.
ARCOSOLV PMA offers better gloss and image distinction.
ARCOSOLV PMA has a similar evaporation rate and solvency compared to EEA in an acrylic-epoxy baking enamel formulation.
ARCOSOLV PMA is used in decorative, protective, agricultural, textile, electrical, coatings and inks.
ARCOSOLV PMA is a colorless, coalescing agent.
ARCOSOLV PMA is designed for adhesive products.
ARCOSOLV PMA possesses low toxicity.
ARCOSOLV PMA offers very good solvency for a variety of substances including acrylic, nitrocellulose and urethane.
ARCOSOLV PMA can be used as a substitute for certain ethylene glycol ether acetates (EEA and EMA).
ARCOSOLV PMA is a colorless, liquid with low toxicity.
ARCOSOLV PMA has a characteristic ester odor and is soluble in water to the extent of 18% at 20°C.
ARCOSOLV PMA has excellent solvency for a variety of substances including acrylic, nitrocellulose and urethane coating resins.
ARCOSOLV PMA is a substitute for certain ethylene glycol (E-series) ether acetates, particularly EEA and EMA.
Applications of ARCOSOLV PMA:
Coatings:
ARCOSOLV PMA is extensively used in many decorative and protective coating formulations.
ARCOSOLV PMA has a similar evaporation rate and solvency compared to EEA in an acrylicepoxy baking enamel formulation.
ARCOSOLV PMA is also found to give better gloss and image distinction.
Cleaners:
ARCOSOLV PMA is generally recommended over their acetates because acetates are subject to hydrolysis in very alkaline water-based cleaners.
However, for solvent-based cleaning, including metal degreasing and specialized equipment cleansing, ARCOSOLV PMA alone and in conjunction with other solvents is being evaluated as a replacement for many chlorinated solvents.
The direction of current regulations is to eliminate the use of many chlorinated solvents in this application.
ARCOSOLV PMA shows very broad solvency.
ARCOSOLV PMA's solvency characteristics generally match those of chlorinated solvents more closely than do glycol ethers and alcohols.
Electronics:
ARCOSOLV PMA has replaced EEA is in photoresist formulations used in semiconductor processing.
In these processes, ARCOSOLV PMA is used in the positive photoresist formulation.
ARCOSOLV PMA may also be used in solvent systems for cleaning and degreasing circuit boards and removing solder flux.
Other Applications of ARCOSOLV PMA:
ARCOSOLV PMA is used in agricultural, cosmetic, ink, textile and adhesive products.
Benefits and Applications of ARCOSOLV PMA
Electronics:
ARCOSOLV PMA has been used in the electronics industry for many years as a photoresist stripper.
Graffiti Removers:
ARCOSOLV PMAbased graffiti removers combine high performance and biodegradability with low volatility and low flammability.
ARCOSOLV PMA can be blended with glycol ethers or acetates such as ARCOSOLV PMA, ARCOSOLV DPMA.
They are cost effective and improve performance on surfaces defaced by lipstick and crayon graffiti.
Agricultural:
The agricultural chemical industry takes advantage of NMP’s solvency and handling properties in agricultural formulations.
Pharmaceuticals:
ARCOSOLV PMA is used as a solvent in pharmaceutical synthetic procedure because of ARCOSOLV PMA broad solvency.
One potential use for ARCOSOLV PMA is as a dermal penetration enhancer for pharmaceuticals.
Consumer and Industrial Cleaners:
ARCOSOLV PMA is an effective stripping agent used in floor stripping, poven cleaners, graffiti removers, and paint strippers.
Due to ARCOSOLV PMA's high solvency and low volatility, ARCOSOLV PMA is used in automotive and industrial cleaners with solvents such as hydrocarbons, terpenes, Arconate Propylene Carbonate and P-Series glycol ethers.
Coatings Solvent:
ARCOSOLV PMA is a powerful solvent for most commercial resins.
Due to ARCOSOLV PMA's high boiling point and excellent solvent power, ARCOSOLV PMA extends and improves the properties of high temperature bake coatings.
For instance, high solid binders are more easily obtained with ARCOSOLV PMA.
Quite often, baked finishes yield coatings with outstanding mechanical and dielectric properties.
ARCOSOLV PMA also aids rheological control: better flow and leveling -less cratering and pinholing.
For these reasons, ARCOSOLV PMA has been shown to be highly effective in wire coating and other high temperature coating applications.
ARCOSOLV PMA is also the preferred solvent for urethane dispersions and is an excellent coalescent for acrylic and styrene acrylic latexes.
Petrochemical Processing:
ARCOSOLV PMA has been shown to have a selective affinity for unsaturated hydrocarbons, aromatics and sulfur-bearing gases.
Due toARCOSOLV PMA's relative non-reactivity and high solvency, ARCOSOLV PMA finds wide applicability as an extraction solvent in lube oil processing as well as in natural and synthetic gas purification's.
Miscellaneous Solvent Applications:
The excellent thermal and chemical stability ofARCOSOLV PMA enhances ARCOSOLV PMA utility as a solvent or cosolvent in many synthetic reaction systems.
ARCOSOLV PMA shows selective affinity for unsaturated hydrocarbons, aromatics, and sulfur compounds.
ARCOSOLV PMA can serve as a cosolvent with water, aromatic/chlorinated hydrocarbons, alcohols, glycol ethers, and ketones.
Uses of ARCOSOLV PMA:
ARCOSOLV PMA is a colorless, combustible liquid with low toxicity.
ARCOSOLV PMA has a characteristic ester odor and is soluble in water to the extent of 18% at 20'C.
ARCOSOLV PMA has excellent solvency for a variety of substances including acrylic, nitrocellulose and urethane coating resins.
ARCOSOLV PMA is a substitute for ethylene glycol (E-series) ether acetates, particularly EEA and EMA.
Color Resist
Other Processing Aids for Displays
Photoresist
Thinner
Other PCB Processing Aids
Solder Resist Ink
Edge Bead Removal and Thinner
Other Semiconductor Processing Aids
Automotive Coatings
Coil Coatings
General Industrial Finishing
Marine Coatings
Metal Packaging
Powder Coatings
Protective Coatings
Inkjet
Rotogravure
Storage of ARCOSOLV PMA:
General industry practice is to store Glycol Ether PMA in carbon steel vessels.
Avoid contact with air when storing for long periods of time.
Store ARCOSOLV PMA only in tightly closed, properly vented containers away from heat, sparks, open flame or strong oxidizing agents.
ARCOSOLV PMA is use only non-sparking tools.
Ground containers before beginning transfer.
Electrical equipment should conform to national electric code.
Handle empty containers carefully.
Flammable combustible residue remains after emptying.
Store ARCOSOLV PMA in properly lined steel or stainless steel to avoid slight discoloration from mild steel.
Glycol ethers should never be stored or handled in copper or copper alloys.
ARCOSOLV PMA may absorb water if exposed to air.
Identifiers of ARCOSOLV PMA:
Chemical name: Propylene glycol methyl ether acetate
Cas number: 108-65-6
Chemical Name: 1-Methoxy-2-Propanol Acetate
Chemical Family: Propylene Glycol Ether Acetate
Properties of ARCOSOLV PMA:
Autoignition temperature (°F): 522
Density (pounds per gallon at 25°C): 8.0
Evaporation Rate (BuAc = 100): 34
Flammability Limits (Lower/Upper Vol. %): 1.5/10
Flash Point (Tag Closed Cup) °C (°F): 47(116)
Solubility by weight in water: 20°C 18
Solubility by weight of water in PMA: 20°C 6
Solubility Parameter (Total Hansen): 9.2
Surface Tension (Dynes/cm): 25°C (77°F) 27
Refractive Index: 25°C (77°F) 1.40
Viscosity (centistokes): 25°C (77°F) 1.1
Vapor Pressure: 25°C (mm Hg) 3.8
Molecular Weight: 132.2
Autoignition temperature ('F): 522
Density (pounds per gallon at 25'C): 8.0
Evaporation Rate (BuAc = 100): 34
Flammability Limits (Lower/Upper Vol. %): 1.5/10
Flash Point (Tag Closed Cup) 'C ('F): 47(116)
Solubility by weight in water @ 20'C: 18
Solubility by weight of water in @ 20'C: 6
Solubility Parameter (Total Hansen): 9.2
Surface Tension (Dynes/cm) @ 25'C (77'F): 27
Refractive Index @ 25'C (77'F): 1.40
Viscosity (centistokes) @25'C (77'F): 1.1
Vapor Pressure @ 25'C (mm Hg): 3.8
Density: 0.970 g/mL at 25 °C(lit.)
Melting point: -87 °C
Boiling point: 145-146 °C(lit.)
Refractive index: n20/D 1.402
Flash Point: 110 °F
Vapour pressure: 3.7 mm Hg ( 20 °C)
Precise Quality: 132.078644
PSA: 35.53000
Viscosity1: .23 sq mm/sec at 20 °C
VaporDensity: 1.02 (Air = 1)
Appearance: Colorless transparent liquid
Storage: Ambient temperatures.
Autoignition Temperature: 670 °F (USCG, 1999)
Chemical Properties: colourless liquid
Color/Form: Clear colorless
InChI: InChI=1S/C6H12O3/c1-5(4-8-3)9-6(2)7/h5H,4H2,1-3H3
InChIKey: LLHKCFNBLRBOGN-UHFFFAOYSA-N
Mol Weight: 132.16 g/mol
Molecular Formula: C6H12O3
Exact Mass: 132.078644 g/mol
CAS Registry Number: 108-65-6
Classification: Carboxylic acid esters
Formula: C6H12O3
Description of ARCOSOLV PMA
CAS: 108-65-6
Molecular formula: CH3COOCH( CH3)CH2OCH3
Appearance: Colorless and transparent liquid(Premium Grade)
Purity(GC)%≥: 99.5
Distillation range (℃/760mmHg): 143.0-149.0
Moisture (KF) %≤: 0.05
Acidity (as HAC)≤%: 0.02
Specific gravity: (d420) 0.970±0.005
Color(Pt-Co)≤: 10
Package and transportation: 200 KGS/Drum Hazardous chemical
Product Name: ARCOSOLV PMA
CAS No.: 108-65-6
UN No.: 3272
InChIKeys: InChIKey=LLHKCFNBLRBOGN-UHFFFAOYSA-N
Molecular Weight: 132.15800
Exact Mass: 132.16
EC Number: 203-603-9
Characteristics
PSA: 35.53000
XLogP3: 0.5844
Appearance: Colorless, transparent
Liquid content: ≥99.0%
Moisture: ≤0.05%
Distillation: 145-152℃
Acidity: ≤0.03%
Specific gravity(d420): 0.966
Flash point: 51°C
Density: 0.96 g/cm3
Melting Point: -87 °C
Boiling Point: 146 °C
Flash Point: 110 °F
Refractive Index: n20/D 1.402
Water Solubility: H2O: 19.8 g/L (25 ºC)
Storage Conditions: Flammables area
Vapor Pressure: Vapour pressure, kPa at 20°C: 0.5
Vapor Density: Relative vapour density (air = 1): 4.6
Explosive limit: vol% in air: 1.5.0 (at 200°C)
Odor: Sweet, ether-like
Specifications of ARCOSOLV PMA:
Colour:White
Shape: Liquid
Content: 99.0%
Moisture: 1.0%
Appearance: Clear Liquid
Color: APHA 10 max.
Specific Gravity: 20/20°C 0.965 - 0.972
Purity Wt %: 98.0 min.
Water Content: Wt % 0.05 max.
Distillation test I.B.P : 140°C min.
D.P.: 150°C max.
Free Acid (as acetic acid)%: 0.02 max.
Synonyms of ARCOSOLV PMA:
1,2-Propanediol monomethyl ether acetate
108-65-6 [RN]
1-methoxy-2-propanol acetate
1-Methoxy-2-propanyl acetate [ACD/IUPAC Name]
1-Methoxy-2-propanyl-acetat [German] [ACD/IUPAC Name]
1-Methoxy-2-propyl Acetate
1-Methoxypropan-2-yl acetate
1VOY1&1O1 [WLN]
203-603-9 [EINECS]
2-Acetoxy-1-methoxypropane
2-Propanol, 1-methoxy-, acetate [ACD/Index Name]
Acétate de 1-méthoxy-2-propanyle [French] [ACD/IUPAC Name]
AI8925000
DOWANOL PMA [Trade name]
DOWANOL(R) PMA
METHOXYISOPROPYL ACETATE
METHOXYISOPROPYL ACETATE, (R)-
METHOXYISOPROPYL ACETATE, (S)-
MFCD00038500 [MDL number]
MPA
PGMEA
propylene glycol methyl ether acetate
Propylene glycol monomethyl ether acetate
(1-Methoxy-2-propyl) acetate
(2-methoxy-1-methyl-ethyl) acetate
[108-65-6] [RN]
108-65-684540-57-8
142300-82-1 [RN]
1-Methoxy-2-acetoxypropane
2-(1-Methoxy)propyl acetate
2-Methoxy-1-methylethyl acetate
2-Propanol, 1-methoxy-, 2-acetate
335203-10-6 [RN]
335203-11-7 [RN]
acetic acid 1-methoxy-2-propyl ester
acetic acid 2-methoxypropyl ester
Acetic acid, 2-methoxy-1-methylethyl ester
acetic acid; methoxymethane; propane-1,2-diol
AI 8925000
ARCOSOLV PMA [Trade name]
Dowanol (R) PMA glycol ether acetate
Ektasolve PM Acetate [Trade name]
GLYCOL ETHER PM ACETATE
Methoxy Propyl acetate
METHOXYISOPROPYL ACETATE|1-METHOXYPROPAN-2-YL ACETATE
Methoxypropyl acetate
Propylene glycol 1-methyl ether 2-acetate
Propylene Glycol 1-Monomethyl Ether 2-Acetate
Propyleneglycol monomethyl ether acetate
PROPYLENEGLYCOLMETHYLETHERACETATE
1-Methoxy-2-propyl acetate
108-65-6
1-methoxypropan-2-yl acetate
PGME
2-Acetoxy-1-methoxypropae
1-Methoxy-2-propyl acetate
2-Acetoxy-1-methoxypropan
Propylene glycol methyl ether acetatePropylene glycol monomethyl ether acetate
1-Methoxy-2-acetoxypropane
2-Methoxy-1-methylethyl acetate
2-Propanol, 1-methoxy-, acetate
METHOXYISOPROPYL ACETATE
Propyleneglycol monomethyl ether acetate
NSC 2207
1-METHOXY-2-PROPANOL ACETATE
Acetic acid, 2-methoxy-1-methylethyl ester
EINECS 203-603-9
2-Propanol, 1-methoxy-, 2-acetate
PROPYLENEGLYCOLMETHYLETHERACETATE
2-(1-Methoxy)propyl acetate
MFCD00038500
1,2-Propanediol monomethyl ether acetate
Propylene glycol 1-methyl ether 2-acetate
Dowanol (R) PMA glycol ether acetate
BRN 1751656
AI3-18548
ARCOSOLV PMA
Dowanol PMA
2-Propanol, acetate
Ektasolve PM Acetate
propylene glycol monomethylether acetate
DSSTox_CID_6796
EC 203-603-9
Propylene Glycol 1-Monomethyl Ether 2-Acetate
DSSTox_RID_78216
1-methoxy-2-acetoxy propane
DSSTox_GSID_26796
SCHEMBL15667
CHEMBL3182130
DTXSID1026796
HSDB 8443
LLHKCFNBLRBOGN-UHFFFAOYSA-
NSC2207
NSC-2207
propyleneglycol methyl ether acetate
Tox21_201436
AKOS015837930
Glycol Ether PM Acetate Reagent Grade
NCGC00249046-01
NCGC00258987-01
CAS-108-65-6
FT-0675939
P1171
X6007
1,2-Propanediol 1-Monomethyl Ether 2-Acetate
1,2-Propanediol monomethyl ether acetate, 99%
Propylene glycol monomethyl ether acetate, 99%
J-504836
Q2170375
Propylene glycol monomethyl ether acetate, >=99.0% (GC)
Propylene glycol monomethyl ether acetate, ReagentPlus(R), >=99.5%
Propylene glycol monomethyl ether acetate, Vetec(TM) reagent grade
Propylene glycol 1-methyl ether 2-acetate 100 microg/mL in Acetonitrile
1-Methoxy-2-acetoxypropane
1-Methoxy-2-propanol acetate
1-Methoxy-2-propyl acetate
1-Methoxypropan-2-yl acetate
1-Methoxypropan-2-yl ethanoate
2-(1-Methoxy)propyl acetate
2-Acetoxy-1-methoxypropane
2-Propanol, 1-methoxy-, acetate
Acetic acid (2-methoxy-1-methyl-ethyl) ester
Acetic acid 1-methoxypropan-2-yl ester
ARCOSOLV PMA
Dowanol (R) pma glycol ether acetate
Dowanol PMA
Ektasolve PM Acetate
PGMEA
Propylene glycol methyl ether acetate
Propylene glycol monomethyl ether acetate
AI3-18548
BRN 1751656
EINECS 203-603-9
NSC 2207