Quick Search
Based on a special amine blend , offers cost effective protection for a range of oilfield applications.
Product Line Surfactants - Cationic and fatty amines
Application area of Armohib CI-41:
corrosion inhibitor for metal pipes (transportation of oil through pipelines)
Characteristics of Armohib CI-41:
Appearance: Viscous liquid at 20°C
Color: Brown
Density: 980 kg/m³ at 20°C
Flash point: ≥ 218°C
Pour point: ≤0 °C
Solubility in other solvents: Soluble in ethanol and acetone
Viscosity: 800mPas at 20°C
Solubility - Solubility in water: Emulsifiable
Specifications of Armohib CI-41:
Acid value: 10 mg KOH/g
Total Amine: 160-185 mg HCl/g
First Aid Measures of Armohib CI-41:
General Advice of Armohib CI-41:
If medical attention is required, show this safety data sheet to the doctor.
If Inhaled:
If inhaled, move person to fresh air.
If not breathing, give artificial respiration and consult a physician.
In Case of Skin Contact:
Wash affected area with soap and water.
Consult a physician if any exposure symptoms are observed.
In Case of Eye Contact:
Immediately rinse eyes with plenty of water for at least 15 minutes.
Consult a physician.
If Swallowed:
Never give anything by mouth to an unconscious person.
Rinse mouth with water.
Do NOT induce vomiting unless advised to do so by a physician or Poison Control Center.
Seek medical attention.
Firefighting Measures of Armohib CI-41:
Extinguishing Media:
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special Hazards Arising from the Substance or Mixture:
Carbon oxides, Nitrogen oxides, Sulfur oxides
Advice for Firefighters:
Wear self contained breathing apparatus for fire fighting if necessary.
Further Information:
No data available.
Accidental Release Measures of Armohib CI-41:
Personal precautions of Armohib CI-41:
Wear respiratory protection.
Avoid dust formation.
Avoid breathing vapours, mist or gas.
Ensure adequate ventilation.
Evacuate
personnel to safe areas.
Avoid breathing dust.
Environmental precautions of Armohib CI-41:
Prevent further leakage or spillage if safe to do so.
Do not let product enter drains.
Method and materials for containment and cleaning up
Pick up and arrange disposal without creating dust.
Sweep up and shovel.
Keep in suitable, closed containers for disposal
Exposure Controls/Personal Protection of Armohib CI-41:
Control Parameters:
Contains no components with established occupational exposure limits.
Exposure Controls of Armohib CI-41:
Appropriate Engineering Controls:
A laboratory fumehood or other appropriate form of local exhaust ventilation should be used to avoid exposure.
Personal Protective Equipment of Armohib CI-41:
All recommendations below are advisory in nature and a risk assessment should be performed by the employer/end user prior to use of this product.
The type of protective equipment must be selected based on the amount and concentration of the dangerous material being used in the workplace.
Eye/Face Protection of Armohib CI-41:
Safety goggles or face shield.
All equipment should have been tested and approved under appropriate standards, such as NIOSH (US), CSA (Canada), or EN 166 (EU).
Skin Protection of Armohib CI-41:
Gloves should be used when handling this material.
Gloves are to be inspected prior to use.
Contaminated gloves are to be removed using proper glove removal technique so that the outer surface of the glove does not contact bare skin.
Dispose of contaminated gloves after use in compliance with good laboratory practices and local requirements.
