Quaternary Ammonium Compound
Barquat MB-50 and Barquat MB-80 are blends of alkyl dimethyl benzyl ammonium chlorides.
When used as an active ingredient in FIFRA1 registered formulations such as hard surface disinfectants, sanitizers and/or certain types of water treatment formulations, these products have been found to provide superior biocidal action against a broad spectrum of microbial organisms such as: bacteria, fungi, viruses, and algae.
This “first” generation quaternary ammonium compound delivers potent germicidal action in most applications.
Typical Chemical Composition of Barquat MB-80:
Active Ingredients of Barquat MB-80:
Alkyl (C14 50%, C16 10%, C12 40%)
Dimethyl Benzyl Ammonium Chloride
Typical Properties of Barquat MB-50:
Appearance: Clear, pale yellow to straw liquid
Color (APHA): 125 Max.
pH (10% solution): 6.5-8.3
Flash Point (Setaflash, F): 107
Average Molecular Weight: 357
Specific Gravity @ 25C: 0.96
Density in lbs./gal.: 8.0
Freezing Point, F: 15
Typical Properties of Barquat MB-80:
Appearance: Clear, pale yellow to straw liquid
Color (APHA): 200 Max.
pH (10% solution): 6.5-8.3
Flash Point (Setaflash, F): 111
Average Molecular Weight: 357
Specific Gravity @ 25C: 0.94
Density in lbs./gal.: 7.8
Freezing Point, F: 59
Physical State of Barquat MB-80:
Barquat MB-80 is a clear, pale yellow to straw liquid with a mild odor.
Congealing may occur during prolonged storage at low temperatures; this is reversible on warming with mixing.
Solubility of Barquat MB-80:
Barquat MB-80 is freely soluble in water, lower alcohols, ketones and glycols.
Regulatory of Barquat MB-50:
EPA Registration No.: 6836-14
Canadian Pesticide Control No: 20380
CAS No.: 68424-85-1
California Registered: Yes
Regulatory of Barquat MB-80:
EPA Registration No.: 6836-2
Canadian Pesticide Control No: 21895
CAS No.: 68424-85-1
California Registered: Yes
Barquat MB-50 and Barquat MB-80 are permitted for use as indirect food contact surface sanitizers as noted in 40 CFR 180.940(a) Barquat MB-50 and Barquat MB-80 are permitted by the FDA for use as a paper slimicide as noted in 21 CFR 176.300.
The components of Barquat MB-50 and Barquat MB-80 are listed in the United States Environmental Protection Agency TSCA Chemical Inventory list.
Barquat CB-50 and Barquat CB-80 Antimicrobials both contain the active substance C12-18 Alkyl dimethyl benzyl ammonium chloride (ADBAC).
ADBAC has a broad antimicrobial efficacy against gram-positive and gram-negative bacteria, yeast, and enveloped viruses.
High antimicrobial efficacy is maintained across a broad pH range.
In formulated products, ADBAC is stable around a wide range of pH levels and is used in a number of applications such as food processing, institutional, veterinary, healthcare areas, and medical devices.
Single-active C12-18 ADBAC products are available in different active concentrations and solvent combinations.
Barquat BAC-80 Antimicrobial contains the active substance C12-C16 Alkyl dimethyl benzyl ammonium chloride (ADBAC).
The active is a cationic molecule offering good surfactant properties and can be formulated together with non-ionic and/or amphoteric surfactants.
ADBAC has a broad antimicrobial efficacy against gram-positive and gram-negative bacteria, yeast, and enveloped viruses.
ADBAC maintains its efficacy across a broad pH-range.
Single-active C12-C16 ADBAC products are available at different active concentrations, C-chain distributions and solvent combinations.
Function: Anti-Microbial Agent
Chemical Family: Quaternary Ammonium Compounds
Certifications & Compliance: BPR Supported
End Uses: Brewery Cleaners, Dairy Cleaners, Disinfectant Products, Biocidal Products
Synonyms:
Alkyl (5%C12,60%C14,30% C16, 5% C18) diMethyl benzyl aMMoniuM chloride
N-Benzyl-N,N-diMethyltetradecan-1-aMiniuM chloride
Alkyl (5%C12,60%C14,30%C16,5%C18)dimethyl benzyl ammonium chloride
Stepanquat 50 NF
Alkyl-C12-18-benzyldimethylammoniumchloride
N-Alkyl(C12-18)-N,N-dimethyl-N-benzylammonium chloride
Barquat(R) CB-80
Barquat(R) MX-50