Quick Search
BERMOCOLL EM 7000 FQ is a high-viscosity cellulose ether additive that improves thickness, consistency, and stability in water-based paint formulations.
BERMOCOLL EM 7000 FQ helps latex paints maintain a smooth and uniform structure by supporting water retention, pigment suspension, and controlled flow behavior.
BERMOCOLL EM 7000 FQ's non-ionic and water-soluble character makes it a reliable rheology modifier for improving both storage stability and application performance.
Synonyms: BERMOCOLL EM 7000 FQ, BERMOCOLL EM 7000 FQ, BERMOCOLL EM 7000, methyl ethyl hydroxyethyl cellulose, MEHEC, cellulose ether, non-ionic cellulose ether, water-soluble cellulose ether, cellulose-based thickener, paint thickener, latex paint thickener, rheology modifier, viscosity modifier, water-retention agent, stabilizing additive, water-based coating additive.
BERMOCOLL EM 7000 FQ is a non-ionic ethyl hydroxyethyl cellulose.
BERMOCOLL EM 7000 FQ improves consistency, stability and water retention of water-based products.
BERMOCOLL EM 7000 FQ is used in latex paints for thickening and stabilizing effects.
The recommended dosage level of BERMOCOLL EM 7000 FQ is 0.2-0.5%.
BERMOCOLL EM 7000 FQ is a non-ionic, water soluble cellulose ether.
BERMOCOLL EM 7000 FQ improves the consistency, the stability, and the water retention of water based products.
BERMOCOLL EM 7000 FQ is a non-ionic, water-soluble cellulose ether based on methyl ethyl hydroxyethyl cellulose.
BERMOCOLL EM 7000 FQ is used mainly in water-based products, especially latex paints, to improve thickening, consistency, stability, and water retention.
In paint formulations, BERMOCOLL EM 7000 FQ helps control viscosity, supports better suspension of ingredients, and improves the overall handling and application behavior of the final coating.
Applications of BERMOCOLL EM 7000 FQ:
BERMOCOLL EM 7000 FQ is used in latex paints for thickening and stabilizing effects.
Normal dosage in paints is 0.2 - 0.5 % calculated on the total paint weight.
BERMOCOLL EM 7000 FQ is easily dispersed in cold water of pH7 or less.
BERMOCOLL EM 7000 FQ can form lumps when added to an alkaline liquid.
To avoid this, BERMOCOLL EM 7000 FQ should be added as a ready stock solution, as a slurry in slight acid water or in an organic solvent, or as a dry mix with other powder materials.
BERMOCOLL EM 7000 FQ is mainly used in latex paints as a thickening and stabilizing additive.
BERMOCOLL EM 7000 FQ improves the consistency, stability, and water retention of water-based products, helping the final formulation remain smooth, uniform, and easier to apply.
In paint systems, BERMOCOLL EM 7000 FQ supports viscosity control, ingredient suspension, better storage stability, and improved application behavior.
The normal dosage in paints is 0.2–0.5% based on the total paint weight.
Stability and Reactivity of BERMOCOLL EM 7000 FQ:
Chemical stability:
BERMOCOLL EM 7000 FQ is stable under normal recommended handling and storage conditions.
Reactivity:
No dangerous reaction is expected when the product is used and stored properly.
Conditions to avoid:
Excessive dust formation, moisture exposure, ignition sources, and poor ventilation should be avoided.
Incompatible materials:
Strong oxidizing agents and highly reactive chemicals should be avoided.
Hazardous decomposition products:
Thermal decomposition or fire may produce carbon oxides and irritating smoke.
Dust hazard:
Fine particles may form combustible dust concentrations in air during processing or handling.
Handling and Storage of BERMOCOLL EM 7000 FQ:
Handling:
BERMOCOLL EM 7000 FQ should be handled using good industrial hygiene and safety practices.
Safe handling:
Avoid breathing dust and avoid direct contact with eyes, skin, and clothing.
Ventilation:
Provide adequate ventilation, especially during weighing, mixing, transfer, or powder handling.
Storage:
Store in a cool, dry, and well-ventilated area.
Storage protection:
Keep the container tightly closed and protect the material from moisture.
Fire protection:
Avoid dust accumulation and keep away from ignition sources.
First Aid Measures of BERMOCOLL EM 7000 FQ:
Inhalation:
Move the affected person to fresh air and keep them comfortable for breathing.
Skin contact:
Wash the affected area with soap and plenty of water.
Eye contact:
Rinse cautiously with water for several minutes and remove contact lenses if present and easy to do.
Ingestion:
Rinse mouth with water and do not induce vomiting unless instructed by medical personnel.
Medical attention:
Seek medical advice if irritation, coughing, breathing discomfort, or other symptoms continue.
Firefighting Measures of BERMOCOLL EM 7000 FQ:
Suitable extinguishing media:
Use water spray, foam, dry chemical powder, or carbon dioxide.
Specific hazards:
BERMOCOLL EM 7000 FQ is an organic cellulose ether powder, and fine dust may create a combustible dust risk in air.
Protective equipment:
Firefighters should wear full protective clothing and self-contained breathing apparatus.
Firefighting precautions:
Avoid generating dust, cool exposed containers if necessary, and prevent contaminated firefighting water from entering drains or waterways.
Accidental Release Measures of BERMOCOLL EM 7000 FQ:
Personal precautions:
Avoid dust formation and avoid breathing dust.
Protective equipment:
Wear suitable gloves, eye protection, protective clothing, and respiratory protection if dust exposure is possible.
Environmental precautions:
Prevent large amounts of material from entering drains, soil, or surface water.
Cleaning method:
Sweep or vacuum the spilled powder carefully using dust-control methods.
Disposal:
Place the collected material into a suitable closed container and dispose of BERMOCOLL EM 7000 FQ according to local, regional, and national regulations.
Exposure Controls / Personal Protection of BERMOCOLL EM 7000 FQ:
Engineering controls:
Use adequate general ventilation or local exhaust ventilation when dust may be generated.
Respiratory protection:
Use suitable dust respiratory protection if ventilation is insufficient.
Eye protection:
Wear safety glasses or chemical safety goggles.
Skin protection:
Wear protective gloves and suitable work clothing.
Hygiene measures:
Wash hands after handling and before eating, drinking, or leaving the work area.
Properties of BERMOCOLL EM 7000 FQ:
Physical form: Whitish powder.
Chemical name: Methyl ethyl hydroxyethyl cellulose.
Chemical family: Cellulose ether.
Product type: Non-ionic, water-soluble cellulose ether.
Grade character: High-viscosity grade.
Particle size: 98% ≤ 500 µm.
Salt content: ≤ 6%.
Water content: ≤ 4%.
pH: 5–7 in 1% solution.
Surface activity: Weak.
pH, 1% solution: 5-7
Surface activity: Weak
Viscosity at 20 °C (Brookfield LV), 1% solution: 6000-8000 mPa.s
Specifications of BERMOCOLL EM 7000 FQ:
Appearance: Whitish powder
Particle size: 98 % ≤ 500 µm
Salt content: ≤ 6 %
Water content: ≤ 4 %
