Quick Search
CAMEO AGENT HA 100 is a specialty coating additive designed for use in industrial formulation systems.
CAMEO AGENT HA 100 supports coating performance by acting as an auxiliary component within resin, paint, or surface-finishing formulations.
CAMEO AGENT HA 100's exact chemical identity is not publicly specified, so it should be handled and described as a proprietary additive grade.
Synonyms: CAMEO AGENT HA 100, CAMEO AGENT HA 100, HA 100 Additive, HA 100 Coating Additive, HA 100 Coating Agent, Cameo HA 100, Cameo HA 100, Proprietary Coating Additive HA 100, Industrial Coating Auxiliary HA 100, Surface Modification Additive HA 100, Coating Performance Additive HA 100, Other Additives HA 100
HA 100 is a CAMEO AGENT with the element of acrylic acid ester.
CAMEO AGENT HA 100 can be applied to all kind of powder coating systems to produce the hammer pattern or wrinkle pattern.
CAMEO AGENT HA 100 is an isoquinoline compound with an added piperazinylsulfonyl group that acts as an inhibitor of protein kinases (PKs), including PKA, PKC, and PKG (IC50 = 8, 12, and 4 µM, respectively).
CAMEO AGENT HA 100 less effectively blocks the activity of myosin light chain kinase (IC50 = 240 µM).
CAMEO AGENT HA 100 has also been shown to inhibit the activity of various enzymes, such as cyclooxygenase-2 and lipoxygenase.
In addition, CAMEO AGENT HA 100 inhibits the expression of various genes, including those involved in inflammation and cell proliferation.
CAMEO AGENT HA 100 is a C9 hydrogenated hydrocarbon resin.
CAMEO AGENT HA 100 acts as a tackifier for hot melt- (HMA) and pressure sensitive adhesives (PSA).
CAMEO AGENT HA 100 is obtained from polymerizing of aromatic and hydrogenation.
CAMEO AGENT HA 100 offers good heat resistance and shows compatibility with SIS, EVA, SBS, SEBS and polyolefin.
CAMEO AGENT HA 100 is a specialty industrial coating additive.
CAMEO AGENT HA 100 appears to be part of a coating/resin auxiliary portfolio that also includes curing agents, leveling agents, matting agents, and polyurethane resins.
Application and Performance of CAMEO AGENT HA 100:
The CAMEO AGENT HA 100 could not be pre-mixed and extruded with all the other ingredients as the pattern shall not be obtained through this method.
Add 0.1-0.5% by weight of base powder, and then cool mix all the materials very thoroughly.
The exact dosage of HA 100 can be determined by lab trials as per the desired pattern.
When using this product, CAMEO AGENT HA 100 generally doesn’t require levelling agent, gloss enhancing wet agent and benzoin, therefore it saves the powder coating production cost.
In order to adjust the pattern, in addition to modulating the HA 100 dosage and types in the powder coating formulation: More filler dosage makes small and shallow pattern; while fewer filler dosage brings big, deep pattern and is easy to reveal the panel.
Big dosage of HA 100 makes small texture pattern, and small dosage gets large texture pattern.
When using this product, mix and extrude all materials except CAMEO AGENT HA 100.
The extruding process is the same as that of the normal powder coating.
After pulverizing, add HA 100 and mix very thoroughly.
CAMEO AGENT HA 100 can be described as a formulation auxiliary for coating, resin, and surface-treatment systems.
CAMEO AGENT HA 100 may be used where a coating formulation requires an additional performance-modifying additive to support processing behavior, surface appearance, or final film quality.
Stability and Reactivity of CAMEO AGENT HA 100:
Chemical stability:
CAMEO AGENT HA 100 is expected to be stable under normal recommended handling and storage conditions.
Reactivity:
CAMEO AGENT HA 100 should not present hazardous reactivity when handled according to standard industrial coating-additive practices.
Possibility of hazardous reactions:
Hazardous reactions are not expected under normal use, but uncontrolled contact with strong oxidizing agents, strong acids, strong bases, or incompatible formulation chemicals should be avoided.
Conditions to avoid:
Heat, sparks, open flames, hot surfaces, direct sunlight, poor ventilation, moisture contamination, and static discharge should be avoided.
Incompatible materials:
Strong oxidizing agents, strong acids, strong bases, and highly reactive chemicals should be avoided.
Hazardous decomposition products:
Thermal decomposition or fire may produce carbon oxides, irritating smoke, and hazardous organic vapors.
Handling and Storage of CAMEO AGENT HA 100:
Handling:
CAMEO AGENT HA 100 should be handled using good industrial hygiene and coating-additive handling practices.
Safe handling:
Avoid breathing dust, vapor, mist, or spray.
Avoid contact with skin, eyes, and clothing.
Ventilation:
Use adequate general ventilation and local exhaust ventilation in mixing, weighing, transfer, and coating formulation areas.
Fire protection:
Keep away from ignition sources.
Ground and bond containers when transferring materials if static accumulation is possible.
Storage:
Store in tightly closed original containers in a cool, dry, and well-ventilated area.
Storage precautions:
Keep away from heat, direct sunlight, moisture, food, drinks, and incompatible materials.
First Aid Measures of CAMEO AGENT HA 100:
General advice:
Remove the affected person from exposure and seek medical advice if symptoms occur or persist.
Inhalation:
Move the person to fresh air.
Keep the person warm and at rest.
Seek medical attention if breathing difficulty, coughing, or irritation occurs.
Skin contact:
Remove contaminated clothing.
Wash skin thoroughly with soap and plenty of water.
Seek medical attention if irritation develops.
Eye contact:
Rinse cautiously with clean water for at least 15 minutes.
Remove contact lenses if present and easy to do.
Seek medical attention if irritation continues.
Ingestion:
Rinse mouth with water.
Do not induce vomiting unless instructed by medical personnel.
Seek medical advice if discomfort occurs.
Firefighting Measures of CAMEO AGENT HA 100:
Suitable extinguishing media:
Use water spray, foam, dry chemical powder, or carbon dioxide.
Unsuitable extinguishing media:
Do not use a strong direct water jet if CAMEO AGENT HA 100 may spread the burning material.
Special hazards:
Fire may produce irritating smoke, carbon monoxide, carbon dioxide, and hazardous organic decomposition products.
Protective equipment:
Firefighters should wear self-contained breathing apparatus and full protective clothing.
Additional information:
Cool closed containers exposed to fire with water spray.
Prevent contaminated firefighting water from entering drains, soil, or waterways.
Accidental Release Measures of CAMEO AGENT HA 100:
Personal precautions:
Avoid breathing dust, mist, vapor, or spray.
Avoid contact with skin, eyes, and clothing.
Use appropriate personal protective equipment.
Environmental precautions:
Prevent release into drains, surface water, groundwater, and soil.
Containment:
Stop the leak if it is safe to do so.
Contain spilled material with inert absorbent material such as sand, earth, vermiculite, or universal binder.
Cleaning method:
Collect absorbed material into suitable closed containers for disposal.
Clean the contaminated area with appropriate cleaning methods.
Waste disposal:
Dispose of waste according to local, regional, and national regulations.
Exposure Controls / Personal Protection of CAMEO AGENT HA 100:
Engineering controls:
Use adequate ventilation and local exhaust systems to control workplace exposure.
Respiratory protection:
Use suitable respiratory protection if ventilation is insufficient or if dust, mist, vapor, or spray exposure may occur.
Hand protection:
Wear chemical-resistant protective gloves.
Eye protection:
Wear safety goggles or chemical splash goggles.
Skin and body protection:
Wear protective clothing suitable for industrial chemical handling.
Hygiene measures:
Wash hands before breaks and after handling.
Do not eat, drink, or smoke in working areas.
Remove contaminated clothing and wash before reuse.
Identifiers of CAMEO AGENT HA 100:
RTECS: TM0862600
PubChem CID: 13135529
MDL Number: MFCD01310980
SMILES: C1CN(CCN1)S(=O)(=O)C2=CC=CC3=C2C=CN=C3.Cl.Cl
Properties of CAMEO AGENT HA 100:
Appearance: White powder
Softening point (°C): 90-125
Solid content (%): ≥99.0
Physical State: Solid
Solubility: Soluble in water (10 mg/ml), and DMSO (35 mg/ml).
Storage: Store at 4° C
Boiling Point: 537.7° C at 760 mmHg (Predicted)
Refractive Index n20D ~1.64 (Predicted)
