Quick Search
CAS Number: 9002-88-4
EC Number: 926-220-5
CERIDUST 9615 A is a micronized wax based on PE and amide wax.
CERIDUST 9615 A acts as a degassing, matting agent, sanding aid, anti-blocking and scratch resistance agent.
CERIDUST 9615 A is used in powder coatings and printing inks.
CERIDUST 9615 A exhibits easy dispersion, anti-caking effect and gloss-reducing properties.
CERIDUST 9615 A is a micronized, blend of polyethylene and amide wax.
CERIDUST 9615 A acts as a high quality dispersing agent.
Recommended for masterbatches, pigment concentrates and coloring plastics.
CERIDUST 9615 A forms fewer agglomerates in the product, allowing easy dispersion.
CERIDUST 9615 A offers good pigment wetting, improved dispersion, viscosity reduction, increased output and increase in pigment concentration.
CERIDUST 9615 A is designed for processing by extrusion.
The minimum shelf life of CERIDUST 9615 A is 2 years.
CERIDUST 9615 A is a modified polyethylene wax ultra-fine powder, which is micronized with polyamide-modified polyethylene wax with an average particle size of 7 microns.
CERIDUST 9615 A can be used in coatings for resin systems such as acrylic, alkyd, polyurethane, nitrocellulose, polyester and acid curing.
Well balanced micronized blend of polyethylene and amide wax.
This outstanding combination offers good rub and scratch resistance, anti-blocking properties and slip performance in printing inks, wood and industrial coatings.
CERIDUST 9615 A is used in powder coatings, CERIDUST 9615 A acts as an excellent degassing agent.
CERIDUST 9615 A furthermore increases the output during extrusion and improves the flowability of the powder.
CERIDUST 9615 A is recommended for solvent and water based coatings and inks.
CERIDUST 9615 A is also very effective additive for powder coatings.
CERIDUST 9615 A is a slip and rub resistance additive in all kind of printing ink systems.
CERIDUST 9615 A is a well balanced wax combination.
This outstanding combination offers excellent rub resistance in offset shed fed and gravure printing inks.
Micronized products tend to form “soft” agglomerates caused by humidity or electrostatic charging, not CERIDUST 9615 A.
The absence of agglomerates makes CERIDUST9615 A easy to dispers and prevents agglomerate related productions problems.
CERIDUST 9615 A is an additive that is slip and rub resistant in all types of printing inks.
Especially in pasty inks, the layering phenomenon on the rubber coating is noticeably reduced due to the anti-blocking behavior.
In solvent-based and water-based coatings, the micronized wax compound acts as a scratch-resistant additive and reduces the coefficient of friction (slip).
CERIDUST 9615 A is recommended for solvent and water based coatings and paints.
CERIDUST 9615 A is also a very effective powder coating additive.
Applications of CERIDUST 9615 A:
CERIDUST 9615 A is recommended for solvent and water based coatings and inks.
CERIDUST 9615 A is also very effective additive for powder coatings.
CERIDUST 9615 A is a slip and rub resistance additive in all kind of printing ink systems.
Especially in pasty inks the phenomenon of piling on the rubber blanket is noticeable reduced due to anti blocking behavior.
In solvent and water based coatings the micronized wax compound performs as scratch resistance additive and lowers the coefficient of friction (slip).
CERIDUST 9615 A also improves the abrasion resistance and minimizes metal markings.
In wood coatings CERIDUST 9615 A provides additionally soft touch and anti blocking performance.
CERIDUST 9615 A can also be used as additive to improve the sand ability.
In powder coatings CERIDUST 9615 A is a very effective degassing agent in all kind of powder coatings.
CERIDUST 9615 A is also increases the output during extrusion process and improves the flow ability of the powder.
CERIDUST 9615 A provides slip properties and enhances scratch resistance of the cured powder coating.
The fine and free flowing powder is easy to blend with all the other ingredients at the beginning of the production procedure.
CERIDUST 9615 A is a micronized wax based on PE and amide wax. Acts as a degassing, matting agent, sanding aid, anti-blocking and scratch resistance agent.
CERIDUST 9615 A is used in powder coatings and printing inks.
Exhibits easy dispersion, anti-caking effect and gloss-reducing properties.
CERIDUST 9615 A Micronized blend of polyethylene and amide wax powder for use in solvent and water based coatings and inks.
Other Applications of CERIDUST 9615 A:
Paints & Coatings — Building & Construction
Wood Coatings & Finishes
Paints & Coatings — Industrial Coatings
Industrial Coatings
Electrical & Electronics — Wire & Cable
Jacketing & Insulation
Application and Features of CERIDUST 9615 A:
Provide excellent surface performance and smooth hand feel, so that the paint film has excellent performance of anti-scratch, anti-stick, wear-resistant, increased slippery and anti-metal scratches.
Greatly improve the water resistance and waterproof ability of the paint film.
When used with fumed silica and organic bentonite, CERIDUST 9615 A can improve the defects of poor surface performance brought by the two to the film, and at the same time, CERIDUST 9615 A can improve the arrangement of matte powder on the surface of the coating, so that the matte performance of the coating can be better played.
CERIDUST 9615 A has no effect on the gloss of the paint film, and is especially suitable for advanced paint systems such as advanced furniture paint, home appliance paint, coil iron paint, printing can paint, and powder paint.
CERIDUST 9615 A can be directly added into the coating system, easy to disperse, no need to grind, and easy to use.
Provide the ink with excellent surface properties such as anti-wear, anti-scratch, anti-sticking, and increase smoothness, so as to avoid the friction between the papers during high-speed printing and wear the ink surface to affect the printing effect, and also avoid the upper and lower paper sticking together.
Eliminate the phenomenon that the ink film is easy to fall off the shaft during high-speed printing.
CERIDUST 9615 A can be directly added to the ink, which is convenient to use and reduces the cost.
Usage of CERIDUST 9615 A:
First dry mix 9615A with all other components of powder coating, then mix well in a squeezer or blender.
The addition amount of CERIDUST 9615 A: generally 0.8-2% of the total weight.
When adding, in order to achieve uniform dispersion and achieve the best effect, CERIDUST 9615 A is generally dispersed with a high-speed disperser.
Benefits of CERIDUST 9615 A:
Excellent rub resistance after a short drying time
Very good anti-blocking properties of the finished goods
Fewer agglomerates in the product, allowing easy dispersion
Good scratch resistance characteristics in powder coatings
Degassing agent
Anti-blocking and anti-caking effect
Gloss-reducing properties in all kind of coatings
Properties of CERIDUST 9615 A:
CERIDUST 9615 A is a well balanced wax combination.
This outstanding combination offers excellent rub resistance in offset shed fed and gravure printing inks.
Micronized products tend to form “soft” agglomerates caused by humidity or electrostatic charging, not CERIDUST 9615 A.
The absence of agglomerates makes CERIDUST 9615 A easy to dispers and prevents agglomerate related productions problems.
Other Properties of CERIDUST 9615 A:
Excellent rub resistance after a short time,
Very good anti blocking properties of the finished good,
Less agglomerates in the product though easier to disperse,
Excellent abrasion resistance after a short drying time,
Fewer agglomerates in the product, allowing for easy dispersion,
Good scratch resistance performance in powder coatings,
Degassing agent,
Anti-blocking and anti-caking effect,
Gloss reduction in all types of coatings.
Typical Properties of CERIDUST 9615 A:
Melting point: 92 °C
Boiling point: 48-110 °C
Density: 0.962 g/mL at 25 °C
Flash point: 270 °C
Synonyms of CERIDUST 9615 A:
Poly(ethylene-1,2-d2)
CERIDUST 3620
polyethylene wax
CERIDUST 9615/A
CERIDUST 9615-A
pad522
pe512
pe617
pen100
pep211
pes100
pes200
petrothene
CPE
fp4
ppe2
Cipe
Dynh
FP 4
Grex
hdpe
Irax
LDPE
Polyethylene(9002-88-4)
Alathon 7140
Alathon 7511
Alcowax 6
Aldyl A
Alithon 7050
Alkathene
Allied PE 617
Alphex FIT 221
Ambythene
Amoco 610A4
Bakelite DFD 330
Bakelite DHDA 4080
Bakelite DYNH
Bareco polywax 2000
Bareco wax C 7500
Bicolene C
BPE-I
Bralen KB 2-11
Bulen A
Carlona PXB
Courlene-X3
Epolene C
Epolene E
Epolene N
Etherin
Ethylene polymer
Grex
HI-Fax
High density Polyethylene
Hizex
HSDB 7602
Polyethylene
Polyethylene, high density
Ethene, homopolymer
Ethylene polymers (8CI)
Oxidized polyethylene
Ethene, homopolymer, oxidized
Polyethylene, oxidized
Polyethylene, partially oxidized
Oxidized polyethylene wax
6-hydroxy-5-methyl-4,11-dioxoundecanoic acid
Ethene
ETHYLENE
Acetene
Elayl
Olefiant gas
POLYETHYLENE
Athylen
Etileno
Liquid ethylene
Bicarburretted hydrogen
74-85-1
Plastipore
Caswell No. 436
9002-88-4
Ethylene, pure
Athylen [German]
Aethylen
C2H4
HSDB 168
Aethen
Liquid ethyene
Polyethylene as
EPA Pesticide Chemical Code 041901
Ethylene (8CI)
UNII-91GW059KN7
CERIDUST 9615 A
Ethene (9CI)
EINECS 200-815-3
UN1038
UN1962
CH2=CH2
Ethylen
H2C=CH2
Polyethylene as med Mol. Wt.
CHEBI:18153
91GW059KN7
1,2-ethylene
ethan-1,2-diyl
MFCD00084423
UN 1038
UN 1962
Ethylene, compressed [UN1962] [Flammable gas]
CERIDUST 9615/A
Alkathene
CERIDUST 9615-A
Ambythene
Etherin
Hizex
Grex
Ethylene polymer
Bicolene C
Epolene C
Epolene E
Epolene N
Bakelite DYNH
Carlona PXB
Aldyl A
Bulen A
Courlene-X3
Alcowax 6
Ethylene [NF]
HI-Fax
Alathon 7140
Alathon 7511
Alithon 7050
Bakelite DFD 330
Alphex FIT 221
Allied PE 617
Bareco polywax 2000
Bralen KB 2-11
Amoco 610A4
Bareco wax C 7500
BPE-I
Bakelite DHDA 4080
Ethyleneradical
Ethylene polymers
Methylidenecarbene
Ethylene, compressed
Ethene, 9CI
oly(ethylene-1,2-d2)
CERIDUST 3620
polyethylene wax
pad522
pe512
pe617
pen100
pep211
pes100
pes200
petrothene
CPE
fp4
ppe2
Cipe
Dynh
FP 4
Grex
hdpe
Irax
LDPE
Polyethylene(9002-88-4)
Alathon 7140
Alathon 7511
Alcowax 6
Aldyl A
Alithon 7050
Alkathene
Allied PE 617
Alphex FIT 221
Ambythene
Amoco 610A4
Bakelite DFD 330
Bakelite DHDA 4080
Bakelite DYNH
Bareco polywax 2000
Bareco wax C 7500
Bicolene C
BPE-I
Bralen KB 2-11
Bulen A
Carlona PXB
ETHYLENE-CMPD
Ethylene, 99.99%
EC 200-815-3
Ethylene, >=99.5%
CERIDUST 9615 A
Ethylene, >=99.9%
Ethene, homopolymer, chlorinated, chlorosulfonated
Polyethylene, chlorinated 140B
CHEMBL117822
Ethylene, purum, >=99.9%
DTXSID1026378; CTK2H7852
Polyethylene granules, high density; CMC_13849
AKOS015915514
LS-2175
LS-2296
MCULE-9947181734
68037-39-8
Ethylene, Messer(R) CANGas, 99.98%
Ethylene, puriss., >=99.95% (GC)
PE
HDPE
LDPE
