CYCAT 296-10 CATALYST

CYCAT 296-10 catalyst is an unique acid catalyst dissolved in isobutanol developed to accelerate the cure of CYMEL® amino resins at normal baking temperatures, and to permit the cure of clear finishes and enamels within relatively low temperature ranges.
CYCAT 296-10 catalyst is a weak acid catalyst supplied as a solution in isobutanol, designed to accelerate the curing of amino resins such as melamine-based CYMEL systems in coating formulations.
CYCAT 296-10 catalyst is widely used in industrial metal coatings, where it enhances properties such as chemical resistance, hardness, and mechanical durability of the final coating film.

Synonyms: CYCAT 296-10 catalyst, CYCAT® 296-10 solution, Acid catalyst 296-10, Phosphate ester catalyst solution, Isobutanol-based acid catalyst, Amino resin curing catalyst, Melamine curing catalyst solution, Crosslinking acid catalyst (coatings), Industrial coating acid catalyst, Low-temperature curing catalyst, Solvent-borne acid catalyst, Phosphoric acid ester catalyst, Organic acid catalyst for coatings, Clear acid catalyst solution, Amino crosslinking accelerator, Coating system curing catalyst

CYCAT 296-10 catalyst is a weak acid catalyst supplied as a solution in isobutanol, designed to accelerate the curing of amino resins such as melamine-based CYMEL systems in coating formulations.
CYCAT 296-10 catalyst enables efficient crosslinking at normal baking temperatures while also allowing curing at relatively low temperature ranges, making it suitable for clear finishes and enamels.

CYCAT 296-10 catalyst exhibits low reactivity, which helps maintain formulation stability and controlled curing behavior.
CYCAT 296-10 catalyst is widely used in industrial metal coatings, where it enhances properties such as chemical resistance, hardness, and mechanical durability of the final coating film.

CYCAT 296-10 catalyst is an unique acid catalyst dissolved in isobutanol developed to accelerate the cure of CYMEL® amino resins at normal baking temperatures, and to permit the cure of clear finishes and enamels within relatively low temperature ranges.

Uses of CYCAT 296-10 Catalyst:
CYCAT 296-10 catalyst is used as an acid catalyst in coating formulations to promote the curing of amino resins, particularly melamine-formaldehyde systems.
CYCAT 296-10 catalyst is commonly applied in industrial coatings for metal substrates such as automotive parts, appliances, and general industrial equipment.

CYCAT 296-10 catalyst is suitable for clear coats and pigmented enamel systems where controlled reactivity and smooth film formation are required.
CYCAT 296-10 catalyst is used in solvent-based and high-solid formulations to enable lower curing temperatures and improve processing efficiency.
CYCAT 296-10 catalyst enhances crosslinking in alkyd, polyester, and acrylic resin systems, improving final coating performance such as hardness and chemical resistance.

Stability and Reactivity of CYCAT 296-10 Catalyst:

Chemical stability:
Stable under normal use, handling, and storage conditions.

Reactivity:
No hazardous reactions under normal conditions.

Conditions to avoid:
Excessive heat.
Moisture.
Contact with strong bases or alkaline pigments.

Incompatible materials:
Strong bases.
Oxidizing agents.

Hazardous decomposition products:
Thermal decomposition may produce carbon oxides (CO, CO₂).
Irritating fumes may be released.

Handling and Storage of CYCAT 296-10 Catalyst:

Handling:
Use with good industrial hygiene practices.
Avoid inhalation of vapors.
Avoid direct contact with skin and eyes.

Storage:
Store in a cool, dry, well-ventilated area.
Keep containers tightly closed.

Storage conditions:
Protect from heat.
Protect from ignition sources.
Protect from moisture.

Packaging materials:
Use compatible and tightly sealed containers.

Shelf life:
Stable under recommended storage conditions.

First Aid Measures of CYCAT 296-10 Catalyst:

Inhalation:
Move to fresh air.
Seek medical attention if symptoms persist.

Skin contact:
Wash with soap and water.
Remove contaminated clothing.

Eye contact:
Rinse with water for several minutes.
Seek medical advice if irritation continues.

Ingestion:
Rinse mouth.
Do not induce vomiting.
Seek medical attention if necessary.

Most important symptoms:
Irritation to eyes may occur.
Irritation to skin may occur.
Respiratory tract irritation may occur.

Firefighting Measures of CYCAT 296-10 Catalyst:

Suitable extinguishing media:
Foam.
Dry chemical powder.
Carbon dioxide (CO₂).

Specific hazards:
Flammable solvent vapors may be present.
Combustion may release toxic gases.

Protective equipment:
Use self-contained breathing apparatus.
Wear protective clothing.

Special precautions:
Cool containers with water spray.
Avoid vapor accumulation.

Accidental Release Measures of CYCAT 296-10 Catalyst:

Personal precautions:
Avoid inhalation and contact.
Wear appropriate personal protective equipment.

Environmental precautions:
Prevent entry into drains and waterways.

Methods for cleanup:
Absorb with inert material such as sand or vermiculite.
Collect for disposal.

Exposure Controls / Personal Protection of CYCAT 296-10 Catalyst:

Occupational exposure limits:
Not established.

Engineering controls:
Ensure adequate ventilation.

Respiratory protection:
Use respiratory protection if ventilation is insufficient.

Hand protection:
Wear chemical-resistant gloves.

Eye protection:
Use safety goggles.

Skin protection:
Wear protective clothing.

Hygiene measures:
Wash hands after handling.
Avoid eating or drinking during use.

Identifiers of CYCAT 296-10 Catalyst:
Chemical type: Phosphate-based acid catalyst
Physical state: Liquid
Appearance: Clear solution
Solvent: Isobutanol

Properties of CYCAT 296-10 Catalyst:
Physical state: Liquid
Appearance: Clear, colorless to slightly yellow solution
Chemical nature: Phosphate ester
Solvent: Isobutanol
Density: ~0.95–1.00 g/cm³ (25 °C)
Viscosity: Low viscosity, easy to incorporate
Solubility: Soluble in alcohols and most organic solvents
Reactivity: Low to moderate
Acidity: Weak acid catalyst