CYCAT 6030

CYCAT 6030 is a DDBSA acidic catalyst partially blocked with an amine which delivers a lower temperature cure at the expense of formulated package stability.
CYCAT 6030 is an amine-neutralized dodecylbenzene sulfonic acid supplied in isopropanol.
CYCAT 6030 can be used in both solvent-borne and water-borne systems

Synonyms: CYCAT 6030, Blocked acid catalyst, Latent acid catalyst, Heat-activated curing catalyst, Thermal acid generator, Amino resin curing catalyst, Crosslinking catalyst, Acid precursor catalyst, Delayed action catalyst, Resin curing accelerator, Organic acid catalyst solution

CYCAT 6030 is a latent acid catalyst used in thermosetting resin systems, particularly in amino resin-based coatings such as melamine and urea-formaldehyde formulations.
CYCAT 6030 remains relatively inactive at ambient conditions, allowing good storage stability and extended pot life, but becomes active upon heating by releasing acid species that initiate crosslinking reactions.
This controlled activation ensures efficient curing, improved film formation, and enhanced durability in industrial coating applications.

CYCAT 6030 is a DDBSA acidic catalyst partially blocked with an amine which delivers a lower temperature cure at the expense of formulated package stability.
CYCAT 6030 was initially developed for applying over waterborne basecoats for Automotive OEM but has found wider application.

CYCAT 6030 is an amine-neutralized dodecylbenzene sulfonic acid supplied in isopropanol.
CYCAT 6030 functions as a catalyst to hasten the cure of amino crosslinking agents and enhance package stability.

Typically, systems utilizing a blocked catalyst will exhibit a slower cure rate compared to those with an unblocked catalyst.
However, unblocked catalysts may compromise package stability.

CYCAT 6030 is suitable for use in clearcoat formulations, waterborne coatings, and solvent-borne coatings.
CYCAT 6030 finds applications in automotive OEM coatings, industrial coatings, and metal coatings.

Uses of CYCAT 6030:
CYCAT 6030 is used as a latent acid catalyst in thermosetting systems, especially in amino resin-based formulations such as melamine and urea-formaldehyde coatings.
CYCAT 6030 is widely applied in automotive and industrial coatings to improve curing efficiency, hardness, and chemical resistance of the final film.

Additionally, CYCAT 6030 is used in printing inks and adhesives to enable controlled crosslinking under heat, ensuring better adhesion and durability.
CYCAT 6030 is also suitable for wood coatings, metal finishes, and other heat-cured systems where delayed activation and stable processing conditions are required.

Benefits of CYCAT 6030:
CYCAT 6030 provides excellent formulated package stability
CYCAT 6030 can be used in both solvent-borne and water-borne systems

Solubility of CYCAT 6030:
CYCAT 6030 is soluble in oxygenated solvents such as alcohols, glycols, glycol ethers and water.
CYCAT 6030 has limited in ketones, esters, and hydrocarbon solvents.

Catalyst Addition of CYCAT 6030:
CYCAT 6030 contains approximately 30% active acid having an equivalent acid number of 54-62 making it 45% as active as CYCAT 600 catalyst.

Stability and Reactivity of CYCAT 6030:

Chemical stability:
Stable under recommended storage and handling conditions.

Reactivity:
Low at ambient conditions.
Becomes reactive upon heating.
Latent acid release may occur.

Conditions to avoid:
Excessive heat.
Moisture.
Prolonged exposure to air.

Incompatible materials:
Strong bases.
Strong oxidizing agents.

Hazardous decomposition products:
Thermal decomposition may produce carbon oxides (CO, CO₂).
Organic acid vapors may be released.

Handling and Storage of CYCAT 6030:

Handling:
Handle in accordance with good industrial hygiene practices.
Avoid inhalation of vapors.
Avoid contact with skin and eyes.
Ensure adequate ventilation.

Storage:
Store in a cool, dry, well-ventilated area.
Keep container tightly closed when not in use.

Storage conditions:
Protect from heat.
Protect from ignition sources.
Protect from moisture.

Packaging materials:
Store in original or compatible sealed containers.

Shelf life:
Stable for extended periods when properly stored.

First Aid Measures of CYCAT 6030:

Inhalation:
Move person to fresh air.
Seek medical attention if symptoms persist.

Skin contact:
Wash thoroughly with soap and water.
Remove contaminated clothing.

Eye contact:
Rinse cautiously with water for several minutes.
Seek medical advice if irritation continues.

Ingestion:
Rinse mouth.
Do not induce vomiting.
Seek medical attention if discomfort occurs.

Most important symptoms:
Irritation of skin may occur.
Irritation of eyes may occur.
Respiratory tract irritation may occur.

Firefighting Measures of CYCAT 6030:

Suitable extinguishing media:
Foam.
Dry chemical powder.
Carbon dioxide (CO₂).

Specific hazards:
Flammable vapors may be present due to solvent content.
Thermal decomposition may release toxic fumes.

Protective equipment for firefighters:
Use self-contained breathing apparatus.
Wear full protective clothing.

Special precautions:
Cool exposed containers.
Avoid inhalation of combustion gases.

Accidental Release Measures of CYCAT 6030:

Personal precautions:
Avoid inhalation of vapors.
Use appropriate personal protective equipment.

Environmental precautions:
Prevent entry into drains, soil, and water systems.

Methods for cleanup:
Absorb with inert materials such as sand or vermiculite.
Collect in suitable containers for disposal according to regulations.

Exposure Controls / Personal Protection of CYCAT 6030:

Occupational exposure limits:
Not specifically established.

Engineering controls:
Provide adequate ventilation.
Use local exhaust systems if necessary.

Respiratory protection:
Use appropriate respirator if ventilation is insufficient.

Hand protection:
Wear chemical-resistant gloves.

Eye protection:
Use safety goggles or face shield.

Skin protection:
Wear protective clothing to minimize exposure.

Hygiene measures:
Avoid contact with skin and eyes.
Wash hands after handling.
Do not eat or drink in work areas.

Identifiers of CYCAT 6030:
Product type: Latent curing catalyst
CAS number: Proprietary
EC number: Not available
Form: Liquid
Appearance: Clear to slightly yellowish solution

Properties of CYCAT 6030:
Physical state: Liquid
Appearance: Clear to slightly hazy
Color: Colorless to pale yellow
Odor: Mild characteristic odor
Solubility: Soluble in organic solvents
pH: Acidic after thermal activation
Density: ~0.95–1.10 g/cm³
Viscosity: Low to medium