PRODUCTS

DIMETHOXYMETHANE

Dimethoxymethane is used fuel additive for smoke reduction, and Paint stripping.
Dimethoxymethane is used in the production of creams and lotions.
Dimethoxymethane is used in removing nail polish.

CAS Number: 109-87-5
EC Number: 203-714-2
MDLNumber: MFCD00008495
Molecular Formula: C3H8O2 / CH2-(OCH3)2
Chemical formula: C3H8O2

SYNONYMS:
Dimethoxymethane, Formaldehyde Dimethyl Acetal, Methoxymethane, Formal, Methylal Acetal, Dimethyl Formal, Methane Dimethoxy, Methyl Formal, dimethoxymethane, methylal, formal, formaldehyde dimethylacetal, methoxymethyl methyl ether, methylene dimethyl ether, anasthenyl, dimethyl formal, dioxapentane, formaldehyde methal ketal, Formal, bis(methoxy)methane, dimethoxymethane, dimethyl formal, formaldehyde dimethyl ketal, methylene dimethyl ether, anesthenyl, Dimethoxymethane, Formaldehyde dimethyl ether, Methylene dimethyl ether, Formaldehyde dimethyl acetal, Methane, dimethoxy-, Dimethyl formal, Anesthenyl, Dimethoxymethane, Formal, Formaldehyde dimethyl acetal, Methoxymethyl methyl ether, Methylene dimethyl ether, Methylene glycol dimethylether, (CH3O)2CH2, Methylenedioxydimethane, Metylal, UN 1234, Formaldehyde methyl ketal, 2,4-Dioxapentane, Dimethylacetal formaldehyde, Bis(methoxy)methane, dimethoxymethane, formaldehyde dimethylacetal, methoxymethyl methyl ether, methylene dimethyl ether, 2,4-Dioxapentane, Anesthenyl, Bis(methoxy)methane, Dimethoxymethane, Dimethyl formal, Formal, Formaldehyde dimethyl acetal, Formaldehyde, methyl ketal, Methoxymethyl methylether, Methylal, Methylene dimethyl ether, 2,4-Dioxapentane, Anesthenyl, Bis(methoxy)methane, Dimethoxymethane, Dimethyl formal, Formal, Formaldehyde dimethyl acetal, Formaldehyde dimethylacetal, Formaldehyde methyl ketal, Methane, dimethoxy-, Methoxymethyl methyl ether, Methylene dimethyl ether, Metylal [Polish], [ChemIDplus] UN1234, Dimethoxymethane, Formal, Formaldehyde Dimethylacetal, Methoxymethyl Methyl Ether, Methylene Dimethyl Ether, Methane, dimethoxy-, Dimethyl formal, Anesthenyl, Dimethoxymethane, Formal, Formaldehyde dimethyl acetal, Methoxymethyl methyl ether, Methylene dimethyl ether, Methylene glycol dimethylether, (CH3O)2CH2, Methylenedioxydimethane, Metylal, UN 1234, Formaldehyde methyl ketal, 2,4-Dioxapentane, Dimethylacetal formaldehyde, Bis(methoxy)methane, Dimethoxymethane, METHYLAL, 109-87-5,Formal, Methane, dimethoxy-, Formaldehyde dimethyl acetal, Dimethyl formal, Anesthenyl, 2,4-Dioxapentane, Methylene dimethyl ether, Bis(methoxy)methane, Methoxymethyl methyl ether, Metylal, Formaldehyde methyl ketal, Formaldehyde dimethylacetal, bis(methyloxy)methane, Methylene glycol dimethylether, 7H1M4G2NUE, CHEBI:48341, Dimethoxy methane, MFCD00008495, HSDB 1820, EINECS 203-714-2, UN1234, UNII-7H1M4G2NUE, Dimethylformal, AI3-16096, CCRIS 9397, Methylene Glycol Dimethyl Ether, Dimethoxy-Methane, Methylenedioxydimethane, METHYLAL [HSDB], METHYLAL [INCI], METHYLAL [MI], Dimethoxymethane 99.5%, Dimethylacetal formaldehyde, METHYLAL [WHO-DD], EC 203-714-2, CHEMBL15537, (CH3O)2CH2, DTXSID1025564, AKOS000120977, UN 1234, Dimethoxymethane, ReagentPlus(R), 99%, Methylal [UN1234], D0637, FT-0625028, NS00003248, Formaldehyde dimethyl acetal, analytical standard, Q411496, J-520340, InChI=1/C3H8O2/c1-4-3-5-2/h3H2,1-2H, F0001-0207, Formaldehyde dimethyl acetal, absolute, over molecular sieve (H2O <=0.01%), >=99.0% (GC), Dimethoxymethane, Formal, Formaldehyde dimethylacetal, Methoxymethyl methyl ether, Methylene dimethyl ether, 2,4-Dioxapentane, Anesthenyl, Bis(methoxy)methane, Dimethoxymethane, Dimethyl formal, Formal, Formaldehyde dimethyl acetal, Formaldehyde dimethylacetal, Formaldehyde methyl ketal, Methane, dimethoxy-, Methoxymethyl methyl ether, Methylene dimethyl ether, UN1234, dimethoxymethane, formaldehyde dimethylacetal, methoxymethyl methyl ether, methylene dimethyl ether, (CH3O)2CH2, 2,4-Dioxapentane, Anesthenyl, Bis(methoxy)methane, Dimethoxymethane, Dimethyl formal, Dimethylacetal formaldehyde, Formal, Formaldehyde dimethyl acetal, Formaldehyde methyl ketal, Methane, dimethoxy-, Methoxymethyl methyl ether, Methylene dimethyl ether, Methylene glycol dimethylether, Methylenedioxydimethane, Metylal, UN 1234, formaldehyde, dimethyl acetal, methanal, dimethyl acetal, 2,4-Dioxapentane, Anesthenyl, Bis(methoxy)methane, Dimethoxymethane, Dimethyl formal, Formal, Formaldehyde dimethyl acetal, Formaldehyde, methyl ketal, Methoxymethyl methylether, Methylal, Methylene dimethyl ether, Formaldehyde Dimethyl Ether, Dimethoxymethane, Formaldehyde dimethyl aceta, Dimethoxymethane, Formal, Formaldehyde Dimethylacetal, Methoxymethyl Methyl Ether, Methylene Dimethyl Ether, Dimethoxymethane , Formal , Dimethyl Formal , Formaldehyde Dimethyl Acetal, 2,4-Dioxapentane, Anesthenyl, Bis(methoxy)methane, Dimethoxymethane, Dimethyl formal, Formal, Formaldehyde dimethyl acetal, Formaldehyde methyl ketal, Methoxymethyl methylether, Methylal, Methylene dimethyl ether, Dimethoxymethane, Formal, Formaldehyde dimethylacetal, Methoxymethyl methyl ether, Methylene dimethyl ether, 2,4-Dioxapentane, Anesthenyl, Bis(methoxy)methane, Dimethoxymethane, Dimethyl formal, Formal, Formaldehyde dimethyl acetal, Formaldehyde dimethylacetal, Formaldehyde methyl ketal, Methane, dimethoxy-, Methoxymethyl methyl ether, Methylene dimethyl ether, Metylal [Polish], [ChemIDplus] UN1234, Methane, dimethoxy-, Dimethyl formal, Anesthenyl, Dimethoxymethane, Formal, Formaldehyde dimethyl acetal, Methoxymethyl methyl ether, Methylene dimethyl ether, Methylene glycol dimethylether, (CH3O)2CH2, Methylenedioxydimethane, Metylal, UN 1234, Formaldehyde methyl ketal, 2,4-Dioxapentane, Dimethylacetal formaldehyde, Bis(methoxy)methane, Dimethoxymethane, Formal, Formaldehyde dimethyl ether, Methylal, Dimethylformal (DMFL), Formaldehyde dimethylacetal, Methoxymethyl methyl ether, Methylene dimethyl ether, METHYLAL, Methane dimethoxy, Anesthenyl, 2,4-Dioxapentane, Bis(methoxy)methane, Methylene glycol dimethylether, 7H1M4G2NUE, CHEBI:48341, Dimethoxy methane, MFCD00008495, HSDB 1820, UN1234, UNII-7H1M4G2NUE, AI3-16096, CCRIS 9397, Methylene Glycol Dimethyl Ether, Dimethoxy-Methane, Methylenedioxydimethane, Dimethylacetal formaldehyde, METHYLAL [HSDB], METHYLAL [INCI], METHYLAL [MI], METHYLAL [WHO-DD], EC 203-714-2, CHEMBL15537, DTXSID1025564, AKOS000120977, D0637, NS00003248, Q411496, J-520340, F0001-0207, UN 1234, formaldehyde dimethyl acetal, methanal dimethyl acetal, DIMETHYL FORMAL, DIMETHYLACETAL FORMALDEHYDE, METHOXYMETHYL METHYL ETHER, METHYLENE DIMETHYL ETHER, Dimethoxymethane, Dimethyl Formal, Formal, Formaldehyde Dimethyl Acetal, Dimethoxymethane, 109-87-5, METHYLAL, Formal, Methane dimethoxy, Formaldehyde dimethyl acetal, Dimethyl formal, Anesthenyl, 2,4-Dioxapentane, Methylene dimethyl ether, Bis(methoxy)methane, Methoxymethyl methyl ether, Metylal, Formaldehyde methyl ketal, Formaldehyde dimethylacetal, bis(methyloxy)methane, Methylene glycol dimethylether, 7H1M4G2NUE, CHEBI:48341, Dimethoxy methane, Metylal [Polish], MFCD00008495, HSDB 1820, EINECS 203-714-2, UN1234, UNII-7H1M4G2NUE, Dimethylformal, AI3-16096, CCRIS 9397, Methylene Glycol Dimethyl Ether, Dimethoxy-Methane, Methylenedioxydimethane, METHYLAL [HSDB], METHYLAL [MI], Dimethoxymethane 99.5%, Dimethylacetal formaldehyde, METHYLAL [WHO-DD], EC 203-714-2, CHEMBL15537, (CH3O)2CH2, DTXSID1025564, AKOS000120977, UN 1234, Dimethoxymethane, ReagentPlus(R), 99%, Methylal [UN1234], D0637, NS00003248, Formaldehyde dimethyl acetal, analytical standard, Q411496, J-520340, InChI=1/C3H8O2/c1-4-3-5-2/h3H2,1-2H, F0001-0207, Formaldehyde dimethyl acetal, absolute, over molecular sieve (H2O <=0.01%), >=99.0% (GC), Methane, dimethoxy-, Dimethyl formal, Anesthenyl, Dimethoxymethane, Formal, Formaldehyde dimethyl acetal, Methoxymethyl methyl ether, Methylene dimethyl ether, Methylene glycol dimethylether, (CH3O)2CH2, Methylenedioxydimethane, Metylal, UN 1234, Formaldehyde methyl ketal, 2,4-Dioxapentane, Dimethylacetal formaldehyde, Bis(methoxy)methane, Methane,dimethoxy-, Methylal, Formaldehyde Dimethylacetal, Dimethyl Formal, Metylal, Methylene Dimethyl Ether, Anesthenyl, Formal, Formaldehyde Methyl Ketal, Methylene Glycol Dimethylether, 2,4-Dioxapentane, Anesthenyl, Bis(methoxy)methane, Dimethoxymethane, Dimethyl formal, Formal, Formaldehyde dimethyl acetal, Formaldehyde dimethylacetal, Formaldehyde methyl ketal, Methane, dimethoxy-, Methoxymethyl methyl ether, Methylene dimethyl ether, Metylal [Polish], [ChemIDplus] UN1234, dimethoxymethane, formaldehyde dimethylacetal, methoxymethyl methyl ether, methylene dimethyl ether, Dimethoxymethane, Anesthenyl, Formal, Methylal, Methylene dimethyl ether, Formaldehyde dimethyl acetal, Dimethyl formal, Methoxymethyl methyl ether, Formaldehyde methyl ketal, 2, 4-Dioxapentane, Bis(methoxy)methane, ODS, 1, 1-Dimethoxymethane, Methylene glycol dimethyl ether, Oxymethylene dimethyl ether, Solvalid DMM 100, Dimethoxymethane, Formal, Formaldehyde dimethyl ether, Methylal, Dimethylformal (DMFL), Formaldehyde dimethylacetal, Methoxymethyl methyl ether, Methylene dimethyl ether, Dimethoxymethane, 109-87-5, METHYLAL, Formal, Methane, dimethoxy-, Formaldehyde dimethyl acetal, Dimethyl formal, Anesthenyl, 2,4-Dioxapentane, Methylene dimethyl ether, Bis(methoxy)methane, Methoxymethyl methyl ether, bis(methyloxy)methane, Metylal, Formaldehyde methyl ketal, Formaldehyde dimethylacetal, Methylene glycol dimethylether, HSDB 1820, Dimethoxy-Methane, UNII-7H1M4G2NUE, EINECS 203-714-2, UN1234, CCRIS 9397, Methylenedioxydimethane, CHEBI:48341, AI3-16096, METHYLAL [HSDB], METHYLAL [MI], Dimethylacetal formaldehyde, METHYLAL [WHO-DD], 7H1M4G2NUE, (CH3O)2CH2, DTXSID1025564, EC 203-714-2, MFCD00008495, UN 1234, Dimethoxy methane, Metylal [Polish], Dimethylformal, Dioxapentane, Methylene Glycol Dimethyl Ether, 2,4Dioxapentane, methane, dimethoxy, Methylene dimethylether, METHYLAL [INCI], Dimethoxymethane 99.5%, Methylal (ACGIH:OSHA), CHEMBL15537, DTXCID905564, Dimethoxymethane (ACGIH:OSHA), FORMALDEHYDE DIMETHYLACETOL, AKOS000120977, Dimethoxymethane, ReagentPlus(R), 99%, Methylal [UN1234] [Flammable liquid], D0637, NS00003248, Formaldehyde dimethyl acetal, analytical standard, Q411496, J-520340, METHYLAL (DIMETHOXY-METHANE) (DIMETHOXYMETHANE), F0001-0207, Formaldehyde dimethyl acetal, absolute, over molecular sieve (H2O <=0.01%), >=99.0% (GC), Dimethoxymethane, Formal, Formaldehyde dimethylacetal, Methoxymethyl methyl ether, Methylene dimethyl ether, (CH3O)2CH2, 2,4-Dioxapentane, Anesthenyl, Bis(methoxy)methane, Dimethoxymethane, Dimethyl formal, Dimethylacetal formaldehyde, Formal, Formaldehyde dimethyl acetal, Formaldehyde methyl ketal, Methane, dimethoxy-, Methoxymethyl methyl ether, Methylene dimethyl ether, Methylene glycol dimethylether, Methylenedioxydimethane, Metylal, UN 1234, formaldehyde, dimethyl acetal, methanal, dimethyl acetal, Formal, Methylal, Anesthenyl, (CH3O)2CH2, DIMETHYLFORMAL, DIMETHOXYMETHANE, Dimethoxymethane, dimethoxy-methan, 2,4-Dioxapentane, bis(methoxy)methane, formaldehyde dime. acetal, Dimethylacetal formaldehyde, Formaldehyde dimethyl acetal~Methylal, Dimethoxymethane, (Formaldehyde dimethyl acetal), 1,2-Dimethoxyethane, Ethane-1,2-diyl dimethyl ether, DME, Glyme, Ethylene glycol dimethyl ether, Monoglyme, Dimethyl glycol, Dimethyl cellosolve

Dimethoxymethane is an ether.
Dimethoxymethane is a colorless liquid with a harsh, sharp odor.
Dimethoxymethane is a clear colourless liquid with a chloroform-like odour.

Dimethoxymethane is soluble in water and is miscible with common organic solvents.
Dimethoxymethane is incompatible with strong oxidizing agents and acids.
Dimethoxymethane should be kept away from heat, hot surfaces, sparks, open flames and other ignition sources.

Dimethoxymethane is a colorless flammable liquid with the chemical formula C3H8O2.
Dimethoxymethane is the dimethyl acetal of formaldehyde with unique properties, suitable for different applications.
Dimethoxymethane has a very strong dissolving capacity and is used as an extraction solvent in manufacturing pharmaceuticals, aerosols, paints, and varnishes.

Dimethoxymethane is a colorless flammable liquid with a low boiling point, low viscosity and excellent dissolving power.
Dimethoxymethane has a chloroform-like odor and a pungent taste.
Dimethoxymethane is the dimethyl acetal of formaldehyde.

Dimethoxymethane is soluble in three parts water and miscible with most common organic solvents
Dimethoxymethane is a clear colorless liquid with a chloroform-like odor.
Dimethoxymethane is soluble in water and miscible with common organic solvents like methanol and ethanol.

Dimethoxymethane acts as a solvent and can be used in many different applications.
Dimethoxymethane is a colorless liquid that acts as a solvent.
Dimethoxymethane has a very strong dissolving capacity and can be used in many different applications.

Because of the rapid evaporation, Dimethoxymethane is often used in aerosol cans, especially as a replacement for, for example, Methylene chloride or Ethyl alcohol.
Dimethoxymethane is a partial substitute for alcohols in gel.
In formulations of antibacterial gel and hand sanitizers, Dimethoxymethane can replace 50% of the alcohol used.

Alcohol is scarce and this can be partly dissolved by using Dimethoxymethane.
Dimethoxymethane is a colorless liquid with a chloroform-like odor.
Dimethoxymethane appears as a clear colorless liquid with a chloroform-like odor.

Dimethoxymethane is an acetal that is the dimethyl acetal derivative of formaldehyde.
Dimethoxymethane is an acetal and a diether.
Dimethoxymethane is functionally related to a methanediol.

Dimethoxymethane is soluble in three parts water and miscible with most common organic solvents.
Dimethoxymethane, also known as glyme, monoglyme, dimethyl glycol, ethylene glycol dimethyl ether, dimethyl cellosolve, and DME, is a colorless, aprotic, and liquid ether that is used as a solvent, especially in batteries.

Dimethoxymethane is miscible with water.
Dimethoxymethane is a clear colorless flammable liquid with a low boiling point, low viscosity and an excellent dissolving power. Dimethoxymethane has a chloroform-like odor and a pungent taste.

Dimethoxymethane is the dimethyl acetal of formaldehyde.
Dimethoxymethane is soluble in three parts water and miscible with most common organic solvents.
Dimethoxymethane can be manufactured by oxidation of methanol or by the reaction of formaldehyde with methanol.

Due to the anomeric effect, Dimethoxymethane has a preference toward the gauche conformation around the C–O bonds, instead of the anti conformation.
Since it is one of the smallest molecules exhibiting this effect, which has great interest in carbohydrate chemistry, Dimethoxymethane is often used for theoretical studies of the anomeric effect.

In aqueous acid, Dimethoxymethane is hydrolyzed back to formaldehyde and methanol.
Dimethoxymethane is a low-boiling solvent, stable in the presence of alkalis and mild acids, and to high temperatures and pressures.
Dimethoxymethane differs from other ethers in that it forms only minute omounts of peroxides.

Dimethoxymethane will dissolve such synthetic resins as nitrocellulose, cellulose acetate and propionate, ethyl cellulose, vinyl, ''Epons'' and polystyrene, and also many of the natural gums and waxes.
Dimethoxymethane as a latent solvent is activated by the addition of esters, ketones or alcohols.

Dimethoxymethane appears as a clear colorless liquid with a chloroform-like odor.
Flash point of Dimethoxymethane is 0°F.
Boiling point of Dimethoxymethane is 42.3°C.

Density of Dimethoxymethane is 0.864 g / cm3 at 68°F (20°C).
Vapors of Dimethoxymethane is heavier than air.
Dimethoxymethane is a colorless liquid with a chloroform-like odor.

Dimethoxymethane is an acetal that is the dimethyl acetal derivative of formaldehyde.
Dimethoxymethane is an acetal and a diether.
Dimethoxymethane derives from a methanediol.

USES and APPLICATIONS of DIMETHOXYMETHANE:
Dimethoxymethane is used reaction solvent or an extraction solvent manufacturing pharmaceuticals, aerosols, paints, varnishes and cleanings
Dimethoxymethane is used production of ion exchange resins, polyacetal as a chain length regulator.
Dimethoxymethane is used as a solvent for adhesives and coatings, a fuel, and an intermediate for other organic compounds.

Dimethoxymethane has been used as an anesthetic.
Dimethoxymethane is used glue Formulations fragrances and pesticides
Dimethoxymethane is used fuel Additive for smoke reduction, and Paint Stripping, and Blowing agent for PU Foams.

Dimethoxymethane is mostly used as a solvent in different industries. Dimethoxymethane is used as a solvent in the manufacture of pharmaceuticals, aerosols, paints, varnishes and cleanings.
Dimethoxymethane is used glue formulations fragrances and pesticides.

Dimethoxymethane is used fuel additive for smoke reduction, and Paint stripping.
Dimethoxymethane is used in the production of creams and lotions.

Dimethoxymethane is a suitable solvent for sun protection products.
Dimethoxymethane is used in removing nail polish.

Dimethoxymethane is used as a fuel and a solvent and to manufacture other organic chemicals.
Dimethoxymethane is used in different industries.
Dimethoxymethane is used as a solvent in the manufacture of resins, adhesives, paint strippers and protective coatings.

Dimethoxymethane is used Hand Cleansers, Antibacterial Gels, Hair Sprays, Sun Protection, Nail Polish Remover
Dimethoxymethane is used as a solvent in different industries. It is used to produce anion exchange resins, manufacture perfumes, paint stripping, etc.
Dimethoxymethane is used reaction solvent manufacturing, pharmaceuticals, Adhesives, Gasoline-additive for increasing octane number, Protective coatings, Paint Stripping, and Aerosol cans.

Plus, Dimethoxymethane is used as a fuel additive for smoke reduction.
Dimethoxymethane is suitable for use in cosmetics, here it can be used in a number of product groups.
The most commonly used application is hair styling sprays, the Dimethoxymethane is then usually used as a replacement for Methylene chloride or Ethyl alcohol (CAS 64-17-5).

Methylene chloride contains, among other things, the H351 (suspected carcinogen) warning and has been replaced by other solvents in cosmetic aerosol cans.
Dimethoxymethane has a comparable, strong, dissolving capacity, which means that the quality of this substance can be found again.
In the case of Ethyl Alcohol, an improvement in quality is possible, when part of the alcohol is replaced by Dimethoxymethane, smaller drop sizes are possible and the drying time is greatly shortened.

Further application of Dimethoxymethane is possible in creams and lotions.
The rapid evaporation creates a nice cooling effect.
This property, together with the high dissolving power for UV filters, makes the solvent very useful for sun protection products.

Removing nail polish with Dimethoxymethane, possibly in combination with Dioxolane, is very effective.
Also as a replacement for Acetone or Ethyl Acetate, Dimethoxymethane has no intoxicating effect when used on the hands, close to the face.
Industrially, Dimethoxymethane is primarily used as a solvent and in the manufacture of perfumes, resins, adhesives, paint strippers and protective coatings.

Another application of Dimethoxymethane is as a gasoline-additive for increasing octane number.
Dimethoxymethane can also be used for blending with diesel.
Dimethoxymethane is often used as a higher-boiling-point alternative to diethyl ether and tetrahydrofuran.

Dimethoxymethane acts as a bidentate ligand for some metal cations.
Dimethoxymethane is therefore often used in organometallic chemistry.
Grignard reactions and hydride reductions are typical application.

Dimethoxymethane is also suitable for palladium-catalyzed reactions including Suzuki reactions and Stille couplings. Dimethoxymethane is also a good solvent for oligo- and polysaccharides.
Sodium naphthalide dissolved in Dimethoxymethane is used as a PTFE etching solution that removes fluorine atoms from the surface, which get replaced by oxygen, hydrogen, and water.

This physically etches the surface as well to prepare the surface for better adhesion
Dimethoxymethane is primarily used as a solvent and in the manufacture of perfumes, resins, adhesives, paint strippers and protective coatings.

Dimethoxymethane gives improved water resistance to polyvinyl alcohol and cellullose derivatives for use in textiles and paper products; good methylating agent; superior solvent to ether in many respects for organic acids an other organic compounds because of its relatively high water solubility, ability to be salted out of solution quickly, and stability towards alkalies; vaporizing solvent for various types of coating process.

Resin Industry: Dimethoxymethane is used as a raw material for formaldehyde based resins.
Cosmetic industry: Dimethoxymethane is used solvent and propellant for aerosols.
Pharmaceutical industry: Dimethoxymethane is substitute of ethyl ether and formaldehyde carrier in medicine synthesis.

Dimethoxymethane is used solvent in coatings, resins, and adhesives
Dimethoxymethane is used intermediate in the synthesis of chemicals such as formaldehyde derivatives
Dimethoxymethane is used component in cleaning agents, paints, and varnishes

Dimethoxymethane is used as a blowing agent in the production of foams
Dimethoxymethane is mainly used in the production of anion exchange resin, also used as a solvent and special fuel.
Dimethoxymethane is also used in the manufacture of perfumes, the production of artificial resins, as a reaction medium for Grignard reactions and rapamycin (synthesis) reactions.

Dimethoxymethane is mainly used in the production of anion exchange resin, also as a solvent and special fuel.
Dimethoxymethane's solubility is stronger than that of ether and acetone, and methanol and azeotropic mixture can dissolve nitrocellulose with high nitrogen content.

However, because of its strong anesthetic vapor, Dimethoxymethane is not suitable for use as a general solvent, usually as a special acoustic solvent.
Dimethoxymethane is also used in the manufacture of perfumes, the production of artificial resins, as a reaction medium for Grignard reactions and rapamycin (synthesis) reactions.

Dimethoxymethane is used in the production of cation exchange resins and solvents, etc.
Dimethoxymethane is used as solvents, Analytical reagents.
Dimethoxymethane is used dissolution characteristics, miscible with alcohol ether acetone, etc., can dissolve most resins, dissolution capacity is strong.

Dimethoxymethane is a good substitute for halogenated hydrocarbons and DMF.
Dimethoxymethane dissolves 32.3% in water at 16 degrees and can therefore be used in the development of aqueous coatings and adhesives.

Dimethoxymethane has been widely used in aerosol, coating, synthetic leather, automobile glazing agent, leather glazing agent, UV glazing agent, polishing oil, film-coated adhesive, Universal Adhesive, spray glue, air freshener and Tenna water.
Dimethoxymethane is used for the production of cation exchange resins and solvents

Solvent: Dimethoxymethane is used in coatings, paints, and varnishes due to its low boiling point and excellent solvency
Fuel Additive: Dimethoxymethane improves the performance of fuels and helps reduce emissions
Intermediate uses of Dimethoxymethane: In the synthesis of pharmaceuticals and fine chemicals

Cleaning Agent: Dimethoxymethane is used in electronic and precision cleaning applications
Aerosol Propellant: Dimethoxymethane is used in industrial and consumer products

-Dimethoxymethane is a product which can be today biosourced up to 86,5% with incredible properties which can fit in various applications to optimize:
- Wetting
- Viscosity
- Drying time (in spray and aerosols)
- Solubilization of ingredients (resins, actives, grease,..)

That's really the key polyvalent product to improve performances of your formulations.
Moreover, Dimethoxymethane is only flammable and not label for health or environment issue

-Applications of Dimethoxymethane as solvent and ligand:
Together with a high-permittivity solvent (e.g. propylene carbonate), dimethoxyethane is used as the low-viscosity component of the solvent for electrolytes of lithium batteries. In the laboratory, Dimethoxymethane is used as a coordinating solvent.

-Reagent in organic synthesis uses of Dimethoxymethane:
Another useful application of Dimethoxymethane is to protect alcohols with a methoxymethyl (MOM) ether in organic synthesis.
Dimethoxymethane can be activated with phosphorus pentoxide in dichloromethane or chloroform.

This method is preferred to the use of chloromethyl methyl ether (MOMCl).
Phenols can also be MOM-protected using Dimethoxymethane, p-toluenesulfonic acid.
Alternatively, MOMCl can be generated as a solution by treating Dimethoxymethane with an acyl chloride in the presence of a Lewis acid catalyst like zinc bromide:

MeOCH2OMe + RC(=O)Cl → MeOCH2Cl + RC(=O)(OMe)).
Unlike the classical procedure, which uses formaldehyde and hydrogen chloride as starting materials, the highly carcinogenic side product bis(chloromethyl) ether is not generated.

BENEFITS OF DIMETHOXYMETHANE:
• Easy handling
• Boiling point: 42°C
• Miscible with all polyols
• Stable in water-based polyurethane systems
• Blowing ability similar to pentanes
• Used alone or as co-blowing agent
• Lowest flammability among the flammable options
• Attractive cost

CHARACTERISTICS OF DIMETHOXYMETHANE:
• Toxicological profile
• Eco-toxicological profile
• Atmospheric behaviour: No ODP, GWP << 1, atmospheric lifetime 2.3 days
• Sourced from natural gas
• Potentially bio-sourced

PRODUCTION OF DIMETHOXYMETHANE:
Monoglyme is produced industrially by the reaction of dimethylether with ethylene oxide:
CH3OCH3 + CH2CH2O → CH3OCH2CH2OCH3

STORAGE OF DIMETHOXYMETHANE:
Dimethoxymethane should be stored in a tightly closed container, away from direct sunlight.
Dimethoxymethane should be stored in a cool, dry and well-ventilated facility away from incompatible substances.
Dimethoxymethane should be kept away from heat, sparks, and flame.

CHARACTERIZATION OF DIMETHOXYMETHANE:
Dimethoxymethane is a colourless flammable liquid with excellent dissolving power.
Dimethoxymethane is the dimethyl acetal of formaldehyde.
Dimethoxymethane can be used in many different applications.

Due to the rapid evaporation, Dimethoxymethane is often used in aerosol cans.
Plus, Dimethoxymethane is suitable for use in cosmetics.
For example, Dimethoxymethane is used in hair styling sprays, creams and lotions.

ADVANTAGES OF DIMETHOXYMETHANE:
*Excellent stability
*Excellent water removal property from organic molecules
*Rapid evaporation
*Low viscosity
*Excellent dissolving power

SOME PROPERTIES OF DIMETHOXYMETHANE:
*Its molar mass is 09 g. mol-1.
*Its melting point is −105 °C.
*Its boiling point is 42 °C.
*Its density is 821 gcm–3

PRODUCTION OF DIMETHOXYMETHANE:
Dimethoxymethane is produced through the reaction of methanol and formaldehyde in the presence of concentrated sulfuric acid.
The resultant Dimethoxymethane is distilled, and unreacted methanol is separated from the product for recycling to obtain Dimethoxymethane with a content of 85% or more.

MAIN ADVANTAGES OF DIMETHOXYMETHANE:
*Excellent Stability
*A versatile replacement solvent
*Excellent water removal property from organic molecules
*Excellent stability in acidic or alkaline medium
*Good miscibility with water

SYNTHESIS AND STRUCTURE OF DIMETHOXYMETHANE:
Dimethoxymethane can be manufactured by oxidation of methanol or by the reaction of formaldehyde with methanol.
In aqueous acid, Dimethoxymethane is hydrolyzed back to formaldehyde and methanol.

Due to the anomeric effect, Dimethoxymethane has a preference toward the gauche conformation with respect to each of the C–O bonds, instead of the anti conformation.

Since there are two C–O bonds, the most stable conformation is gauche-gauche, which is around 7 kcal/mol more stable than the anti-anti conformation, while the gauche-anti and anti-gauche are intermediate in energy.
Since it is one of the smallest molecules exhibiting this effect, which has great interest in carbohydrate chemistry, Dimethoxymethane is often used for theoretical studies of the anomeric effect.

PROPERTIES OF DIMETHOXYMETHANE:
*Low boiling point and high volatility
*Dimethoxymethane exhibits good solubility for organic compounds
*Non-corrosive and relatively stable under standard conditions

BENEFITS OF DIMETHOXYMETHANE:
*Effective solvent with minimal residue
*Dimethoxymethane enhances drying times in coatings and paints
*Environmentally friendly alternative to chlorinated solvents

ADVANTAGES OF DIMETHOXYMETHANE:
*Excellent Stability
*A versatile replacement solvent
*Excellent stability in acidic or alkaline medium
*Excellent water removal property from organic molecules

PROPERTIES OF DIMETHOXYMETHANE:
*Low boiling point makes it suitable for quick-drying applications
*Non-corrosive and stable under standard conditions
*Compatible with a wide range of organic compounds

BENEFITS OF DIMETHOXYMETHANE:
*Dimethoxymethane provides efficient solvency for various applications
*Dimethoxymethane evaporates quickly, reducing drying time in coatings and adhesives
*Environmentally friendlier compared to heavier solvents

PHYSICAL AND CHEMICAL PROPERTIES OF DIMETHOXYMETHANE:
Colorless, clear, volatile and flammable liquid with chloroform odor and irritation.
melting point -104.8 ℃
boiling point 44 ℃
relative density 0.8560
refractive index 1.3513
flash point -17.8 ℃
solubility in 3 times water
[Solubility in water at 20 °c 32% by weight].
Miscible with most organic solvents.

NATURE OF DIMETHOXYMETHANE:
Dimethoxymethane is a colorless, clear, volatile, flammable liquid with chloroform odor and irritation.
Melting point 104.8 °c.
The relative density was 0. 8560.
The boiling point of 44 deg C, flash point of 17.8 deg C.
Spontaneous ignition point 237.2.
Refractive index (nDo) 3513.
Dissolved in 3 times of water [20 ° C water solubility 32% (mass)].
Miscible with most organic solvents.

PREPARATION METHOD OF DIMETHOXYMETHANE:
methanol and formaldehyde were synthesized in a synthetic tower using concentrated sulfuric acid as a catalyst, and the fraction controlled at the top temperature of 41. 5-42 ℃ was formaldehyde.

PRODUCTION METHOD OF DIMETHOXYMETHANE:
methanol and formaldehyde were reacted in the synthesis column under the catalysis of concentrated sulfuric acid.
The resultant Dimethoxymethane is distilled out from the tower where the temperature is controlled at 41.5-42 ° C., and unreacted methanol is separated from the product for recycling to obtain Dimethoxymethane with a content of 85% or more. 37% of methanol and of formaldehyde are consumed per ton of product.

The impurities in the product Dimethoxymethane are mainly methanol and formaldehyde.
When higher purity is required, formaldehyde can be removed by oxidation with alkaline hydrogen peroxide, and methanol can be removed by distillation with sodium metal.

PRODUCTION OF DIMETHOXYMETHANE:
Dimethoxymethane is produced through the reaction of methanol and formaldehyde in the presence of an acidic catalyst.
Dimethoxymethane is generally known that Dimethoxymethane can be produced in the presence of sulfuric acid.
However, sulfuric acid results in severe corrosion as well as some difficulties in waste disposal.
Conventionally, the Dimethoxymethane production is of batch process in which reaction and product isolation are carried out separately.

OTHER STORAGE CONDITIONS OF DIMETHOXYMETHANE:
Dimethoxymethane should be stored in an area without drain or sewer access.
Dimethoxymethane should be stored away from direct sunlight.

Dimethoxymethane should be stored in tightly closed containers.
Dimethoxymethane should be stored away from incompatible substances.
Dimethoxymethane should be kept away from heat, sparks, and flame.

Dimethoxymethane is an important raw material and an excellent solvent in industry.
Dimethoxymethane should be kept separated from strong oxidants and strong bases.
Plus, Dimethoxymethane should be stored in a cool, dry, and well-ventilated facility.

PHYSICAL and CHEMICAL PROPERTIES of DIMETHOXYMETHANE:
Chemical Name: Methylal (Dimethoxymethane)
Molecular Formula: C3H8O2
Molecular Weight: 76.10 g/mol
EC Number: 203-714-2
CAS Number: 109-87-5
Appearance: Clear, colorless liquid
Density: ~0.855 g/cm³ at 20°C
Melting Point: -102°C
Boiling Point: 42°C
Flash Point: -27°C (closed cup)
Solubility: Soluble in water and organic solvents

Odor: Pleasant, ether-like smell
Chemical Formula: C3H8O2
Molar Mass: 76.095 g•mol−1
Appearance: Colorless liquid
Odor: Chloroform-like
Density: 0.8593 g/cm³ (at 20°C)
Melting Point: -105°C (-157°F; 168 K)
Boiling Point: 42°C (108°F; 315 K)
Solubility in Water: 33% (20°C)
Vapor Pressure: 330 mmHg (20°C)

Magnetic Susceptibility (χ): -47.3•10⁻⁶ cm³/mol
Chemical Formula: C3H8O2
Molar Mass: 76.09 g/mol
XLogP3: 0.2
Hydrogen Bond Donor Count: 0
Hydrogen Bond Acceptor Count: 2
Rotatable Bond Count: 2
Exact Mass: 76.052429494 g/mol
Monoisotopic Mass: 76.052429494 g/mol
Topological Polar Surface Area: 18.5 Å²

Heavy Atom Count: 5
Formal Charge: 0
Complexity: 12.4
Isotope Atom Count: 0
Defined Atom Stereocenter Count: 0
Undefined Atom Stereocenter Count: 0
Defined Bond Stereocenter Count: 0
Undefined Bond Stereocenter Count: 0
Covalently-Bonded Unit Count: 1
Compound Is Canonicalized: Yes
Molecular Formula: C3H8O2

Molecular Weight: 76.08 g/mol
CAS Number: 109-87-5
EC Number: 203-714-2
IUPAC Name: Dimethoxymethane
EC Name: Dimethoxymethane
Boiling point (°C) at 1013 hPa: 42.3
Freezing point (°C) at 1013 hPa: -104.8
Flash-point (°C) at 1013 hPa: DIN 51755 part 2 Closed cup: -30.5
Relative density at 20°C: OECD 109: 0.861
Vapour pressure (kPa) at 20°C: ASTM D323 modified: 40

Surface tension (mN/m) at 20°C: 21.2
Water solubility (g/L) at 20°C: Methylal in water: 330
Viscosity (kinematic) (mm²/s) at 25°C: 0.371
Evaporation rate compared to DIN 53170:
Diethyl ether (= 1): 1.36
Butyl acetate (= 1): 0.11
Physical description: Colorless liquid with a chloroform-like odor.
Boiling point: 111°F
Molecular weight: 76.1
Freezing point/melting point: -157°F
Vapor pressure: 330 mmHg

Flash point: -26°F (open cup)
Vapor density: 2.6
Specific gravity: 0.86
Ionization potential: 10.00 eV
Lower explosive limit (LEL): 1.6%
Upper explosive limit (UEL): 17.6%
NFPA health rating: 1
NFPA fire rating: 3
NFPA reactivity rating: 1
InChI: InChI=1S/C3H8O2/c1-4-3-5-2/h3H2,1-2H3
InChI Key: NKDDWNXOKDWJAK-UHFFFAOYSA-N

Formula: C3H8O2
SMILES: COCOC
Molecular Weight1: 76.09
CAS: 109-87-5
Molecular Formula: C3H8O2
IUPAC name: dimethoxymethane
Cas Number: 109-87-5
Molecular weight: 76.09 g/mol
Density: 0.821 g/cm–3
Boiling Point: 42 °C
Flashpoint: -31 °C
Melting Point: −105 °C
CSA Number: 109-87-5

Molecular Formula: C3H8O2
Molecular Weight: 76.09 g/mol
Physical & Chemical Properties:
Appearance: Clear Colourless liquid
Flash point: 180°C
Boiling Point: 42°C-44°C
Freezing Point/Melting Point: -105°C
Auto Ignition Temperature: 237°C
Chemical Name: Dimethoxymethane
Molecular Formula: C3H8O2

Molecular Weight: 76.09 g/mol
EC Number: 203-714-2
CAS Number: 109-87-5
Appearance: Colorless liquid
Density: ~0.861 g/cm³ at 20°C
Melting Point: -108°C
Boiling Point: 42-43°C
Flash Point: -14°C (closed cup)
Solubility: Miscible with water, alcohols, and organic solvents
Odor: Pleasant, ether-like
CAS: 109-87-5

EINECS: 203-714-2
InChI: InChI=1/C3H8O2/c1-4-3-5-2/h3H2,1-2H3
Molecular Formula: C3H8O2
Molar Mass: 76.09
Density: 0.860g/mL at 20°C (lit.)
Melting Point: -105 °C
Boling Point: 41-43°C
Flash Point: -18 °C
Water Solubility: 32.3 g/100 mL (16 ºC)
Solubility: 32.3 g/100 mL (16°C)

Vapor Pressure: 6.38 psi (20 °C)
Vapor Density: 2.6 (vs air)
Appearance: Liquid
Color: Clear colorless
Odor: Mild, ethereal; chloroform-like
Merck: 14,6012
BRN: 1697025
pKa: 3.1 [at 20 ℃]
pH: pH (12.5 vol %, 25℃): 4.5～6.6
Storage Condition: Store at
Sensitive: Moisture Sensitive

Explosive Limit: 1.6-17.6%(V)
Refractive Index: n20/D 1.354
Stability: Stable
Molecular Weight: 76.09440
Exact Mass: 76.09
EC Number: 203-714-2
UNII: 7H1M4G2NUE
ICSC Number: 1152
UN Number: 1234
DSSTox ID: DTXSID1025564

Color/Form: COLORLESS, CLEAR LIQUID | Colorless solid.
HScode: 2909199090
PSA: 18.46000
XLogP3: 0.23670
Appearance: Methylal appears as a clear colorless liquid with a chloroform-like odor.
Flash point: 0°F.
Boiling point: 42.3°C.
Density: 0.864 g/cm³ at 68°F (20°C).
Vapors heavier than air.
Density: 0.8593 g/cm³ @ Temp: 20 °C
Melting Point: -105 °C
Boiling Point: 41.6 °C @ Press: 760 Torr

Flash Point: -18ºC
Refractive Index: 1.3525-1.3545
Water Solubility: H2O: 32.3 g/100 mL (16 ºC)
Storage Conditions: 2-8ºC
Vapor Pressure: 364.565 mmHg at 25°C
Vapor Density: 2.6
Flammability characteristics: Class IB
Flammable Liquid: Fl.P. below 73°F and BP at or above 100°F.
Explosive limit: vol% in air: 2.2 19.9
Odor: CHLOROFORM ODOR
Taste: PUNGENT TASTE

OH: 4.90e-12 cm³/molecule*sec
Henrys Law Constant: 1.73e-04 atm-m³/mole | Henry's Law constant = 1.63X10⁻⁴ atm-cu m/mole (calc).
Air and Water Reactions: Highly flammable. Water soluble.
Reactive Group: Acetals, Ketals, Hemiacetals, and Hemiketals
Reactivity Alerts: Highly Flammable
Autoignition Temperature: 459 °F (USCG, 1999) | 459 °F (237 °C) | 235 °C
Heat of Combustion: -10,970 BTU/LB = -6,100 CAL/G = -255X10⁵ JL/KG
Ionization Potential: 10.00 eV
Heat of Vaporization: 161.5 BTU/LB = 89.8 CAL/G = 3.76X10⁵ JL/KG
Critical Temperature & Pressure: CRITICAL TEMP: 419 °F = 215 °C = 488 DEG K

Beilstein Number: 1697025
MDL: MFCD00008495
CoE Number: 10031
XlogP3: 0.20 (estimated)
Molecular Weight: 76.09516000
Formula: C3H8O2
Appearance: Colorless clear liquid (estimated)
Assay: 95.00 to 100.00%
Water Content: ~0.1%
Food Chemicals Codex Listed: No

Specific Gravity: 0.85500 to 0.86200 @ 25.00 °C
Pounds per Gallon - (estimated): 7.114 to 7.173
Refractive Index: 1.35000 to 1.35600 @ 20.00 °C
Melting Point: -105.00 °C @ 760.00 mm Hg
Boiling Point: 42.00 °C @ 760.00 mm Hg
Vapor Pressure: 398.000000 mmHg @ 25.00 °C
Flash Point: 1.00 °F TCC (-17.22 °C)
Soluble in alcohol, water (244000 mg/L @ 16°C, experimentally determined)
Physical description: Colorless liquid with a chloroform-like odor.
Boiling point: 111°F

Molecular weight: 76.1
Freezing point/melting point: -157°F
Vapor pressure: 330 mmHg
Flash point: -26°F (open cup)
Vapor density: 2.6
Specific gravity: 0.86
Ionization potential: 10.00 eV
Lower explosive limit (LEL): 1.6%
Upper explosive limit (UEL): 17.6%
NFPA health rating: 1
NFPA fire rating: 3

NFPA reactivity rating: 1
EINECS: 203-714-2
Density: 0.8560 g/cm3
Melting Point: -104.8°C
Boiling Point: 45.238 °C at 760 mmHg
Vapor Pressure: 43.99 kPa at 20 °C
Flash point: -17.8 °C
Explosion Limits, Lower: 1.60 vol%
Explosion Limits, Upper: 17.60 vol%

Molecular formula: C3H8O2
Molecular weight: 76.08 g/mol
CAS number: 109-87-5
EC number: 203-714-2
IUPAC name: Dimethoxymethane
EC name: Dimethoxymethane
EINECS: 203-714-2
Density: 0.8560 g/cm3
Freezing Point/Melting Point: -104.8°C
Boiling Point: 45.238 °C at 760 mmHg

Vapor Pressure: 43.99 kPa at 20 °C
Flash point: -17.8 °C
Explosion Limits, Lower: 1.60 vol%
Upper: 17.60 vol%
Appearance: Colorless transparent liquid
CSA Number: 109-87-5
Molecular Formula: C3H8O2
Molecular Weight: 76.09 g/mol
Appearance: Clear colorless liquid
Flash point: 180°C

Boiling Point: 42°C-44°C
Freezing Point/Melting Point: 105°C
Auto Ignition Temperature: 237°C
IUPAC name: Dimethoxymethane
CAS Number: 109-87-5
Density: 0.821 g/cm3
Boiling Point: 42 °C
Flashpoint: -31 °C
Melting Point: −105 °C

Chemical formula: C3H8O2
Molar mass: 76.095 g•mol−1
Appearance: Colorless liquid
Odor: Chloroform-like
Density: 0.8593 g cm−3 (at 20 °C)
Melting point: −105 °C (−157 °F; 168 K)
Boiling point: 42 °C (108 °F; 315 K)
Solubility in water: 33% (20 °C)
Vapor pressure: 330 mmHg (20 °C)

Magnetic susceptibility (χ): −47.3•10−6 cm3/mol
Molecular Weight: 76.09 g/mol
XLogP3: 0.2
Hydrogen Bond Donor Count: 0
Hydrogen Bond Acceptor Count: 2
Rotatable Bond Count: 2
Exact Mass: 76.052429494 g/mol
Monoisotopic Mass: 76.052429494 g/mol
Topological Polar Surface Area: 18.5Å²
Heavy Atom Count: 5
Formal Charge: 0

Complexity: 12.4
Isotope Atom Count: 0
Defined Atom Stereocenter Count: 0
Undefined Atom Stereocenter Count: 0
Defined Bond Stereocenter Count: 0
Undefined Bond Stereocenter Count: 0
Covalently-Bonded Unit Count: 1
Compound Is Canonicalized: Yes
Molecular formula: C3H8O2
Molecular weight: 76,08

CAS number: 109-87-5
EC number: 203-714-2
IUPAC name: Dimethoxymethane
EC name: Dimethoxymethane
Boiling point (°C) at 1013 hPa: 42.3
Freezing point (°C) at 1013 hPa: -104.8
Flash-point (°C) at 1013 hPa :-30.5
Relative density at 20°C: 0.861

Vapour pressure (kPa) at 20°C: 40
Surface tension (mN/m) at 20°C: 21.2
Water solubility (g/L) at 20°C Methylal in water: 330
Viscosity (kinematic) (mm²/s) at 25°C: 0.371
Evaporation rate compared to Diethyl ether (= 1): 1.36
Butyl acetate (= 1): 0.11
Physical state: clear, liquid
Color: colorless
Odor: pungent

Melting point/freezing point:
Melting point/range: -105 °C - lit.
Initial boiling point and boiling range: 41 - 42 °C - lit.
Flammability (solid, gas): No data available
Upper/lower flammability or explosive limits:
Upper explosion limit: 19,9 %(V)
Lower explosion limit: 2,2 %(V)
Flash point: -18 °C - closed cup
Autoignition temperature: 260 °C at 1.013 hPa

Decomposition temperature: No data available
pH: No data available
Viscosity
Viscosity, kinematic: No data available
Viscosity, dynamic: 0,325 mPa.s at 20 °C
Water solubility 330 g/l at 20 °C - soluble
Partition coefficient: n-octanol/water: No data available
Vapor pressure: 439,8 hPa at 20 °C 1.548,8 hPa at 55 °C

Density: 0,86 g/cm3 at 25 °C - lit.
Relative density: No data available
Relative vapor density: No data available
Particle characteristics: No data available
Explosive properties: No data available
Oxidizing properties: No data available
Other safety information:
Surface tension: 21,2 mN/m at 20 °C
Relative vapor density: 2,63 - (Air = 1.0)
Boiling point: 111°F
Molecular weight: 76.1
Freezing point/melting point: -157°F

Vapor pressure: 330 mmHg
Flash point: -26°F (open cup)
Vapor density: 2.6
Specific gravity: 0.86
Ionization potential: 10.00 eV
Lower explosive limit (LEL): 1.6%
Upper explosive limit (UEL): 17.6%
NFPA health rating: 1
NFPA fire rating: 3
NFPA reactivity rating: 1

FIRST AID MEASURES of DIMETHOXYMETHANE:
-Description of first-aid measures:
*General advice:
Show this material safety data sheet to the doctor in attendance.
*If inhaled:
After inhalation:
Fresh air.
*In case of skin contact:
Take off immediately all contaminated clothing.
Rinse skin with water/ shower.
*In case of eye contact:
After eye contact:
Rinse out with plenty of water. Remove contact lenses.
*If swallowed:
After swallowing:
Make victim drink water (two glasses at most).
Consult doctor if feeling unwell.
-Indication of any immediate medical attention and special treatment needed:
No data available

ACCIDENTAL RELEASE MEASURES of DIMETHOXYMETHANE:
-Environmental precautions:
Do not let product enter drains.
-Methods and materials for containment and cleaning up:
Cover drains.
Collect, bind, and pump off spills.
Observe possible material restrictions.
Take up with liquid-absorbent material.
Dispose of properly.
Clean up affected area

FIRE FIGHTING MEASURES of DIMETHOXYMETHANE:
-Extinguishing media:
*Suitable extinguishing media:
Carbon dioxide (CO2)
Foam
Dry powder
*Unsuitable extinguishing media:
For this substance/mixture no limitations of extinguishing agents are given.
-Further information:
Remove container from danger zone and cool with water.
Prevent fire extinguishing water from contaminating surface water or the ground water system.

EXPOSURE CONTROLS/PERSONAL PROTECTION of DIMETHOXYMETHANE:
-Control parameters:
--Ingredients with workplace control parameters:
-Exposure controls:
--Personal protective equipment:
*Eye/face protection:
Use equipment for eye protection.
Safety glasses
*Skin protection:
Splash contact:
Material: butyl-rubber
Minimum layer thickness: 0,7 mm
Break through time: 120 min
*Body Protection:
Flame retardant antistatic protective clothing.
-Control of environmental exposure:
Do not let product enter drains.

HANDLING and STORAGE of DIMETHOXYMETHANE:
-Precautions for safe handling:
*Hygiene measures:
Change contaminated clothing.
Wash hands after working with substance.
-Conditions for safe storage, including any incompatibilities:
*Storage conditions:
Keep container tightly closed in a dry and well-ventilated place.
Handle and open container with care.

STABILITY and REACTIVITY of DIMETHOXYMETHANE:
-Chemical stability:
The product is chemically stable under standard ambient conditions (room temperature) .