Quick Search

PRODUCTS

DISPERSANT ASP 42

DISPERSANT ASP 42

Dispersant ASP 42 is an APEO-free, formaldehyde-free, acrylic polymer. 
Dispersant ASP 42 is an ammonium salt of polycarboxylic acid. 
Dispersant ASP 42 is a highly effective dispersant for anionic pigments and extenders in aqueous systems. 
Dispersant ASP 42 shows compatibility with synthetic emulsions, foams and is effective in a wide pH range. 
Dispersant ASP 42 requires short grinding time. 
Dispersant ASP 42 provides excellent storage stability of finished products. 
Dispersant ASP 42 can be added alone or in combination with nonionic compatibilizers. 
Dispersant ASP 42 is suitable for emulsion paints. 
Recommended dosage level when used as dispersant for emulsion paints is 0.1-0.5% calculated on pigments/extenders. 
The maximum shelf life of Dispersant ASP 42 is 12 months.


Dispersant ASP 42 is a high performance APEO and formaldehyde free dispersant for anionic pigments and fillers in aqueous systems. 
Dispersant ASP 42 is compatible with all common synthetic emulsions, low foaming and effective over a wide pH range.

Dispersant ASP 42 is usually added to emulsion paints at 0.1 - 0.5% based on pigments/fillers. 
The actual amount required depends significantly on the type of pigments/fillers used and must be determined on a case-by-case basis (determining the optimal amount of dispersing agent). 
Dispersant ASP 42 can be added alone or in combination with non-ionic compatibilizers. 
If more than 1% of Dispersant ASP 42 is added, it should be checked whether the sensitivity of the film to water increases. 
In an emulsion paint application procedure, Dispersant ASP 42 should normally be added before adding pigments/fillers.


Dispersant ASP 42 is a highly effective APEO- and formaldehyde-free dispersant for anionic pigments and thinners in aqueous systems.
Dispersant ASP 42 is compatible with all common synthetic emulsions, creates little foam and is effective in a wide pH range.

Dispersant ASP 42 is an APEO-free, formaldehyde-free acrylic polymer.
Dispersant ASP 42 is an ammonium salt of polycarboxylic acid. It is a very effective dispersant for anionic pigments and thinners in aqueous systems.
Dispersant ASP 42 is compatible with synthetic emulsions, foams and is effective in a wide pH range.
Dispersant ASP 42 requires a short grinding time.


Dispersant ASP 42 is a highly effective, APEO- and formaldehyde-free dispersant for anionic pigments and fillers in aqueous systems.
Dispersant ASP 42 is compatible with all common synthetic emulsions, low foaming and effective over a wide pH range.


AREAS OF USE
-Facade and interior paints
-Water-based pigment pastes
-Printing inks

BENEFITS
-A small amount of dispersing agent is required to effectively disperse pigments and fillers.
-Short pigment dispersion time
-Excellent storage stability of finished products

Compound: fatty acid polymer
Amine number: 42-48 mg KOH/g
Acid number: 46-53 mg KOH/g
Appearance: brownish liquid.
Active Ingredients: 94%

  • Share !
E-NEWSLETTER