DRAKEOL 260

Drakeol 260 is used in coatings, paints, inks, adhesives, and polymer applications (as a carrier for additives or active ingredients).
Drakeol 260 is used in degreasing and solvent formulations.
Drakeol 260 is used as light lubricating oil in machinery, metalworking, and processing lines.

CAS Number (common white mineral oil): 8042-47-5 (sometimes listed under related petroleum fractions as 64742-47-8, 8012-95-1, etc.) 
EC Number (for CAS 8042-47-5): 265-149-8 according to some regulatory listings (EINECS/ELINCS) 
Chemical Composition: Petroleum hydrocarbon mixture of mainly saturated alkanes (C ≈ N range depends on distillation cut)
Chemical Type: White Mineral Oil / Aliphatic Hydrocarbon mixture
Product Family: Solvents & Specialty Aliphatic Hydrocarbons (Drakesol series) and/or White Mineral Oils (Drakeol series) depending on specifications 
Molecular Formula: Not applicable
(DRAKEOL 260 is not a discrete molecule but a complex mixture of saturated aliphatic hydrocarbons, therefore no single molecular formula exists)
Molecular Weight: Not applicable / not fixed
(because it is a mixture, the molecular weight cannot be expressed as a single value; it represents a distribution of hydrocarbon chain lengths)

SYNONYMS:
Drakeol 260, Drakesol 260, Petroleum hydrocarbon solvent, White hydrocarbon fluid, Aliphatic hydrocarbon solvent, USP/NF mineral oil (for USP-grade variants), Pharmaceutical white oil, Food-grade white oil, Industrial white oil

Drakeol 260 is a specialty aliphatic solvent.
Drakeol 260 possesses with low aromatic and optimal boiling range.
Drakeol 260 is a specialty aliphatic solvent with low aromatic and optimal boiling range.

Drakeol 260 is a highly refined petroleum-derived hydrocarbon fluid that belongs to the family of white mineral oils and aliphatic hydrocarbon solvents.
Thermally, Drakeol 260 shows good stability across a wide temperature range typical of industrial processing operations.

Drakeol 260 does not polymerize, hydrolyze, or oxidize easily under normal conditions.
This stability allows Drakeol 260 to function reliably in processes involving moderate heat, such as resin compounding, extrusion support fluids, or lubricant base components.

When exposed to extreme temperatures or open flame, Drakeol 260 behaves like other refined petroleum oils, producing combustion products such as carbon oxides rather than toxic decomposition gases.
From a regulatory and compliance standpoint, Drakeol 260 is typically classified under the broader category of white mineral oils rather than as a unique chemical substance.

This means regulatory assessments focus on Drakeol 260's general hydrocarbon composition and refining level rather than a specific molecular structure.
Many white mineral oils with similar specifications are listed on major chemical inventories and may comply with FDA or EU food-contact regulations when produced to the appropriate grade.

However, compliance always depends on the exact specification and intended use, so industrial grades like Drakeol 260 must be evaluated case-by-case for food, cosmetic, or pharmaceutical applications.
Storage stability is another important characteristic of Drakeol 260.

Drakeol 260 does not readily degrade or separate during long-term storage, provided it is kept in clean, closed containers away from excessive heat and strong oxidizing agents.
This stability simplifies logistics and inventory management for manufacturers who rely on consistent raw-material performance.

USES and APPLICATIONS of DRAKEOL 260:
Drakeol 260 and related Drakeol/Drakesol products are used across industries.
Solvent & Carrier: Drakeol 260 is used in coatings, paints, inks, adhesives, and polymer applications (as a carrier for additives or active ingredients).

Industrial Cleaning: Drakeol 260 is used in degreasing and solvent formulations.
Lubrication: Drakeol 260 is used as light lubricating oil in machinery, metalworking, and processing lines.
Cosmetics & Personal Care: When produced to appropriate grades (e.g., USP/NF; not always Drakeol 260 specifically).

Unlike single-molecule chemicals, Drakeol 260 is a carefully controlled mixture of saturated hydrocarbons obtained through severe refining processes such as hydrotreating and hydrogenation.
These processes remove aromatics, sulfur, nitrogen compounds, and other impurities, resulting in a product with high purity, chemical inertness, and consistent performance.

Because of this refining severity, Drakeol 260 exhibits very low reactivity and minimal odor, which is a critical requirement in many sensitive industrial and formulation applications.
Drakeol 260 is suitable for use in a wide variety of FDA applications.

Drakeol 260 is recommended for paints and coatings.
Drakeol 260 is used in paints and coatings.
Drakeol 260 is suitable for use in a wide variety of FDA applications.

From a formulation perspective, Drakeol 260 is valued for its role as a neutral carrier fluid.
Drakeol 260 does not participate in chemical reactions and therefore does not interfere with active ingredients, polymers, additives, or pigments.

This makes Drakeol 260 particularly suitable as a diluent or processing aid in coatings, inks, sealants, and elastomer systems where predictable behavior and long-term stability are required.
Its non-polar nature allows Drakeol 260 to solubilize or disperse hydrophobic substances while remaining immiscible with water, which is advantageous in moisture-sensitive formulations.

Thermally, Drakeol 260 shows good stability across a wide temperature range typical of industrial processing operations.
Drakeol 260 does not polymerize, hydrolyze, or oxidize easily under normal conditions.
This stability allows Drakeol 260 to function reliably in processes involving moderate heat, such as resin compounding, extrusion support fluids, or lubricant base components.

When exposed to extreme temperatures or open flame, Drakeol 260 behaves like other refined petroleum oils, producing combustion products such as carbon oxides rather than toxic decomposition gases.
In the coatings and inks industry, Drakeol 260 is often used to control viscosity, improve flow and leveling, and reduce defects such as pinholes or cratering.

Because Drakeol 260 evaporates slowly compared to lighter hydrocarbon solvents, it can extend open time and improve film formation without causing rapid solvent loss.
Drakeol 260's low aromatic content also contributes to reduced odor and improved workplace conditions compared to traditional aromatic solvents.

In polymer processing and rubber applications, Drakeol 260 functions as a processing oil or extender oil.
Drakeol 260 improves flexibility, reduces brittleness, and enhances handling properties of rubber compounds and thermoplastics.
Due to its saturated hydrocarbon structure, Drakeol 260 is less likely to cause discoloration or degradation of polymers over time, which is especially important for light-colored or transparent products.

Drakeol 260 occupies a niche between light hydrocarbon solvents and heavier lubricating oils.
Its balance of solvency, stability, low odor, and inertness makes Drakeol 260 a versatile ingredient across coatings, polymers, rubber, industrial fluids, and specialty chemical formulations.
Drakeol 260's value lies not in chemical reactivity, but in predictability, purity, and compatibility with a wide range of industrial systems.

-Food & FDA Applications of Drakeol 260:
Certain white oils meet FDA indirect and direct food contact criteria (e.g., as release agents or processing aids).
Specific compliance depends on grade.

-Pharmaceutical / OTC & Medical Applications:
High-purity mineral oils have pharmaceutical uses.
Not necessarily Drakeol 260 unless specified as USP grade.

CHEMICAL & STRUCTURAL CHARACTERISTICS of DRAKEOL 260:
Drakeol 260 is not a single chemical molecule but a complex mixture of saturated aliphatic hydrocarbons — primarily linear and branched alkanes derived from refined petroleum.
White mineral oils like Drakeol are chemically inert and show little reactivity under normal conditions.

CHARACTERISTICS & BENEFITS of DRAKEOL 260:
*Low aromatic content:
Highly refined and contains minimal aromatics relative to heavier petroleum solvents.

*Thermal stability:
Relatively stable up to Drakeol 260's boiling range.

*Inert & low odor:
Makes Drakeol 260 suitable for many industrial uses where reactivity or odors are undesirable.

*Wide boiling range:
Useful where moderate solvent power and evaporation characteristics are needed.

BENEFITS of DRAKEOL 260:
Good solvent for non-polar materials.
Drakeol 260 provides lubrication and release properties.
Often compatible with FDA/food contact when appropriately refined.
Versatile over a range of industrial formulations.

GENERAL CHEMICAL NATURE of DRAKEOL 260:
Drakeol 260 is a highly refined petroleum-derived mixture of saturated aliphatic hydrocarbons (white mineral oil type), supplied as a clear, colorless, low-odor liquid.
Drakeol 260 is generally used as a solvent, carrier fluid, lubricant, and industrial ingredient.

PHYSICAL and CHEMICAL PROPERTIES of DRAKEOL 260:
CAS Number (common white mineral oil): 8042-47-5 (sometimes listed under related petroleum fractions as 64742-47-8, 8012-95-1, etc.) 
EC Number (for CAS 8042-47-5): 265-149-8 according to some regulatory listings (EINECS/ELINCS) 
Chemical Composition: Petroleum hydrocarbon mixture of mainly saturated alkanes (C ≈ N range depends on distillation cut)
Product Name: Drakeol 260 (often referred to under the Drakesol or Drakeol line of white / mineral oils)
Chemical Type: White Mineral Oil / Aliphatic Hydrocarbon mixture
Product Family: Solvents & Specialty Aliphatic Hydrocarbons (Drakesol series) and/or White Mineral Oils (Drakeol series) depending on specifications 

Appearance: Clear, colorless oily liquid
Odor: Slight hydrocarbon or nearly odorless
Vapor Pressure: < 0.1 mmHg at 20 °C (very low)
Boiling Point Range: ~269–309 °C (approx for similar grades)
Pour/Freeze Point: ≈ -7 °C (approx for similar grades)
Flash Point (Closed Cup): ~127 °C (260 °F) (typical solvent range)
Specific Gravity / Density: ~0.82 (≈ 820 kg/m³)

Solubility: Insoluble in water; soluble in other hydrocarbons
Viscosity: Dependent on grade (e.g., moderate viscosity oils)
Physical state: Liquid
Appearance: Clear, colorless liquid
Odor: Very slight hydrocarbon odor / nearly odorless
Density (20 °C): Approximately 0.82 g/cm³
Specific gravity (15–20 °C): ~0.82

Viscosity (40 °C): Moderate viscosity (typical of medium white oils; exact value depends on specification)
Boiling range: Approximately 260–310 °C
Flash point (closed cup): ~120–130 °C
Pour point: Approximately –7 °C
Vapor pressure (20 °C): Very low (< 0.1 mmHg)
Volatility: Low
Solubility in water: Insoluble
Solubility in organic solvents: Soluble in hydrocarbons and non-polar organic solvents

Refractive index (20 °C): ~1.46–1.47
Color (Saybolt): +30 (typical for white mineral oils)
Chemical nature: Highly refined saturated aliphatic hydrocarbons
Chemical class: White mineral oil / petroleum hydrocarbon solvent
Composition type: UVCB substance (Unknown or Variable composition, Complex reaction products)
Molecular structure: Predominantly linear and branched paraffinic hydrocarbons
Aromatic content: Very low (severely hydrotreated)

Reactivity: Chemically inert under normal conditions
Stability: Stable at ambient temperatures and pressures
Oxidation resistance: Good resistance to oxidation under normal use
Polymerization: Will not polymerize
Hydrolysis: Not hydrolyzable
Corrosivity: Non-corrosive to metals under normal conditions
Incompatibilities: Strong oxidizing agents
Decomposition products: Carbon oxides (CO, CO₂) when burned or thermally decomposed
pH: Not applicable (non-aqueous substance)

FIRST AID MEASURES of DRAKEOL 260:
-Description of first-aid measures
*General advice:
Show this material safety data sheet to the doctor in attendance.
*If inhaled:
After inhalation: 
Fresh air.
*In case of skin contact: 
Take off immediately all contaminated clothing. 
Rinse skin with
water/ shower.
*In case of eye contact:
After eye contact: 
Rinse out with plenty of water. 
Call in ophthalmologist. 
Remove contact lenses.
*If swallowed:
After swallowing: 
Immediately make victim drink water (two glasses at most). 
Consult a physician.
-Indication of any immediate medical attention and special treatment needed.
No data available

ACCIDENTAL RELEASE MEASURES of DRAKEOL 260:
-Environmental precautions:
Do not let product enter drains.
-Methods and materials for containment and cleaning up:
Cover drains. 
Collect, bind, and pump off spills. 
Observe possible material restrictions. 
Take up dry. 
Dispose of properly. 
Clean up affected area.

FIRE FIGHTING MEASURES of DRAKEOL 260:
-Extinguishing media:
*Suitable extinguishing media:
Carbon dioxide (CO2) 
Foam 
Dry powder
*Unsuitable extinguishing media:
For this substance/mixture no limitations of extinguishing agents are given.
-Further information:
Prevent fire extinguishing water from contaminating surface water or the ground water system.

EXPOSURE CONTROLS/PERSONAL PROTECTION of DRAKEOL 260:
-Control parameters:
--Ingredients with workplace control parameters:
-Exposure controls:
--Personal protective equipment:
*Eye/face protection:
Use equipment for eye protection. 
Safety glasses
*Body Protection:
protective clothing
*Respiratory protection:
Recommended Filter type: Filter A 
-Control of environmental exposure:
Do not let product enter drains.

HANDLING and STORAGE of DRAKEOL 260:
-Conditions for safe storage, including any incompatibilities:
*Storage conditions:
Tightly closed. 
Dry.

STABILITY and REACTIVITY of DRAKEOL 260:
-Chemical stability:
The product is chemically stable under standard ambient conditions (room temperature).
-Possibility of hazardous reactions:
No data available