DRY POWDER FLOWABLE AGENT HA230

Dry Powder Flowable Agent HA230 is an oleamide-based additive developed to improve powder flow, lubricity, and surface slip.
Dry Powder Flowable Agent HA230 reduces friction and unwanted adhesion between compatible powder particles and contacting surfaces.
Dry Powder Flowable Agent HA230 is used in powder coatings, thermoplastic powders, polymer compounds, inks, masterbatches, and related dry formulations.

CAS Number: 301-02-0 for the representative oleamide component
EC Number: 206-103-9 for the representative oleamide component
Molecular Formula: C₁₈H₃₅NO for oleamide
Molecular Weight: 281.48 g/mol for oleamide

SYNONYMS

Dry Powder Flowable Agent HA230, Dry Powder Flowable Agent HA 230, Dry Powder Flowable Agent HA-230, HA230, HA 230, HA-230, Oleamide, Oleic Acid Amide, Oleylamide, Oleyl Amide, (Z)-Octadec-9-enamide, (Z)-9-Octadecenamide, 9Z-Octadecenamide, 9-Octadecenamide, cis-9-Octadecenamide, cis-9,10-Octadecenoamide, Oleic Amide, Fatty Acid Amide, Unsaturated Fatty Acid Amide, C18:1 Fatty Acid Amide, C18 Unsaturated Amide, Long-Chain Fatty Amide, Primary Fatty Acid Amide, Oleamide Powder, Oleamide Beads, Micronized Oleamide, Powder-Coating Oleamide, Powder Flow Additive, Dry Powder Flow Aid, Powder Flowable Agent, Powder Fluidity Additive, Powder Lubricating Agent, Powder Anti-Caking Agent, Powder Anti-Blocking Agent, Powder Slip Agent, Powder-Coating Slip Additive, Powder-Coating Lubricant, Powder-Coating Flow Additive, Thermoplastic Powder Flow Aid, Polyethylene Powder-Coating Additive, Polymer Slip Additive, Polymer Anti-Block Additive, Polymer Mold-Release Additive, Surface Lubricity Additive, Friction-Reduction Additive, Scratch-Resistance Additive, Scuff-Resistance Additive, Processing Lubricant, Internal Lubricant, External Lubricant, Fatty Amide Processing Aid, CAS 301-02-0, EC 206-103-9, EINECS 206-103-9, C₁₈H₃₅NO

APPLICATIONS

Dry Powder Flowable Agent HA230 serves as a flow-supporting additive in thermosetting powder-coating formulations.
Dry Powder Flowable Agent HA230 can reduce interparticle friction and improve movement of powder through storage, transfer, and application equipment.

Dry Powder Flowable Agent HA230 supports powder coatings applied through fluidized-bed systems.
Dry Powder Flowable Agent HA230 can improve powder circulation and fluidization when particle size, air velocity, humidity, and dosage are properly controlled.

Dry Powder Flowable Agent HA230 functions in electrostatic powder-spray formulations requiring consistent powder delivery.
Dry Powder Flowable Agent HA230 can assist uniform transport from the feed hopper to the spray gun while the complete formulation determines charge behavior.

Dry Powder Flowable Agent HA230 contributes to powder movement through hoppers, pumps, venturis, hoses, and feed lines.
Dry Powder Flowable Agent HA230 helps reduce sticking and irregular feeding caused by friction between powder particles and equipment surfaces.

Dry Powder Flowable Agent HA230 supports reclaimed-powder handling in compatible coating operations.
Dry Powder Flowable Agent HA230 can help maintain flow when reclaimed powder is blended with virgin powder under validated ratios.

Dry Powder Flowable Agent HA230 functions in stored powder coatings requiring resistance to agglomeration and caking.
Dry Powder Flowable Agent HA230 can reduce particle adhesion, although warehouse temperature and moisture remain critical to storage stability.

Dry Powder Flowable Agent HA230 contributes to powder coatings processed under moderately humid conditions.
Dry Powder Flowable Agent HA230 does not independently prevent moisture-related caking and should be combined with suitable packaging and environmental control.

Dry Powder Flowable Agent HA230 supports powders that must retain flow after transportation, vibration, and compression during stacking.
Dry Powder Flowable Agent HA230 can reduce consolidation-related handling difficulties when the product is not exposed to excessive heat.

Dry Powder Flowable Agent HA230 functions in polyethylene thermoplastic powder coatings.
Dry Powder Flowable Agent HA230 can improve powder flow, finished-film slip, surface gloss, and lubricity in compatible polyethylene compositions.

Dry Powder Flowable Agent HA230 contributes to polypropylene-based powder and polymer formulations.
Dry Powder Flowable Agent HA230 can migrate toward the polymer surface and form a lubricating layer that lowers friction.

Dry Powder Flowable Agent HA230 supports ethylene-vinyl-acetate-modified powder formulations requiring improved processing and surface slip.
Dry Powder Flowable Agent HA230 suitability depends on polymer polarity, melt temperature, additive loading, cooling rate, and surface requirements.

Dry Powder Flowable Agent HA230 can be evaluated in polyamide or nylon powders requiring lubrication and reduced blocking.
Dry Powder Flowable Agent HA230 must be tested for compatibility because excessive migration can influence adhesion, printing, bonding, or surface treatment.

Dry Powder Flowable Agent HA230 functions in thermoplastic-elastomer powders and compounds requiring reduced friction.
Dry Powder Flowable Agent HA230 can support mold release and processing while softness, oil content, and polymer composition influence additive migration.

Dry Powder Flowable Agent HA230 contributes to epoxy powder coatings as an external dry-flow or surface-lubricity additive after compatibility testing.
Dry Powder Flowable Agent HA230 dosage must be controlled because excessive fatty amide can influence intercoat adhesion, cure, gloss, or surface energy.

Dry Powder Flowable Agent HA230 supports carboxyl-polyester powder coatings requiring improved powder handling.
Dry Powder Flowable Agent HA230 should be evaluated for effects on melt flow, leveling, curing response, gloss, hardness, and weathering.

Dry Powder Flowable Agent HA230 functions in epoxy-polyester hybrid powder coatings.
Dry Powder Flowable Agent HA230 can improve dry-powder handling while the epoxy-polyester reaction controls thermoset film formation.

Dry Powder Flowable Agent HA230 contributes to polyurethane powder coatings requiring consistent feeding and application.
Dry Powder Flowable Agent HA230 must be assessed for compatibility with blocked isocyanates, hydroxyl polyesters, catalysts, and curing temperatures.

Dry Powder Flowable Agent HA230 can be evaluated in acrylic powder coatings requiring slip and reduced particle adhesion.
Dry Powder Flowable Agent HA230 concentration should be minimized where high clarity, strong recoat adhesion, or precise surface energy is required.

Dry Powder Flowable Agent HA230 supports rotational-molding and polymer-powder processes requiring free-flowing feed material.
Dry Powder Flowable Agent HA230 can improve powder movement into complex mold regions while melt fusion remains dependent on polymer and heating conditions.

Dry Powder Flowable Agent HA230 functions in polymer masterbatches designed to deliver oleamide into downstream compounds.
Dry Powder Flowable Agent HA230 can be pre-dispersed in a compatible carrier to improve dosing accuracy and additive distribution.

Dry Powder Flowable Agent HA230 contributes to polyethylene films, sheets, bags, and packaging polymers as a slip and anti-blocking additive.
Dry Powder Flowable Agent HA230 migrates toward the surface and can lower static and dynamic coefficients of friction after processing.

Dry Powder Flowable Agent HA230 supports extrusion and injection-molding compounds requiring reduced friction against processing equipment.
Dry Powder Flowable Agent HA230 can assist melt processing, mold release, torque reduction, and surface smoothness at an optimized dosage.

Dry Powder Flowable Agent HA230 functions in printing inks and coating inks requiring improved slip, scratch resistance, and anti-blocking behavior.
Dry Powder Flowable Agent HA230 must be evaluated for effects on printability, gloss, pigment dispersion, overprinting, lamination, and adhesion.

Dry Powder Flowable Agent HA230 can be evaluated in dry adhesive, sealant, and hot-melt premixes requiring improved powder handling.
Dry Powder Flowable Agent HA230 suitability depends on its effect on melting, wetting, adhesion, cohesion, open time, and final bond strength.

Dry Powder Flowable Agent HA230 supports laboratory and production optimization of powder-flow and surface-performance properties.
Dry Powder Flowable Agent HA230 can be assessed through angle-of-repose, flow-rate, fluidization, caking, coefficient-of-friction, gloss, adhesion, and application tests.

DESCRIPTION

Dry Powder Flowable Agent HA230 is a powder-flow and lubricity additive associated with oleamide chemistry.
Dry Powder Flowable Agent HA230 is publicly listed within a powder-coating additive category and identified as oleamide in commercial shipment descriptions.

Dry Powder Flowable Agent HA230 representative chemical component is oleamide, systematically named (Z)-octadec-9-enamide.
Dry Powder Flowable Agent HA230 representative oleamide component is identified by CAS Number 301-02-0 and EC Number 206-103-9.

Dry Powder Flowable Agent HA230 representative oleamide component has the molecular formula C₁₈H₃₅NO and a molecular weight of approximately 281.48 g/mol.
Dry Powder Flowable Agent HA230 contains a long unsaturated C18 hydrocarbon chain attached to a primary carboxamide group.

Dry Powder Flowable Agent HA230 normally appears as a white to off-white wax-like powder, beads, granules, or fine solid.
Dry Powder Flowable Agent HA230 exact particle form, color, particle size, and purity should be confirmed from the current technical specification.

Dry Powder Flowable Agent HA230 representative oleamide component has a melting region commonly reported between approximately 68°C and 82°C.
Dry Powder Flowable Agent HA230 commercial melting behavior varies with oleamide purity, fatty-amide distribution, crystal form, and residual fatty acids.

Dry Powder Flowable Agent HA230 is practically insoluble in water because the long hydrocarbon chain dominates its solution behavior.
Dry Powder Flowable Agent HA230 is compatible with many nonpolar polymers, oils, waxes, and selected heated organic media.

Dry Powder Flowable Agent HA230 representative oleamide component is commonly manufactured by amidation of oleic acid or a suitable oleic-acid derivative.
Dry Powder Flowable Agent HA230 production quality can be influenced by residual acid, moisture, color, unsaturation, total amide content, and related fatty amides.

Dry Powder Flowable Agent HA230 improves dry-powder flow primarily by reducing friction and adhesion at particle-contact points.
Dry Powder Flowable Agent HA230 can coat or associate with particle surfaces and produce a more lubricious contact interface.

Dry Powder Flowable Agent HA230 can also migrate within compatible molten polymers toward the finished surface.
Dry Powder Flowable Agent HA230 surface migration can produce slip, anti-blocking, release, and scuff-resistance effects after cooling.

Dry Powder Flowable Agent HA230 may behave differently in thermoplastic powder coatings and thermosetting powder coatings.
Dry Powder Flowable Agent HA230 becomes physically incorporated into thermoplastics, while excessive surface migration in thermosets can interfere with adhesion or recoating.

Dry Powder Flowable Agent HA230 effectiveness depends on particle size, addition method, concentration, resin chemistry, storage temperature, and processing history.
Dry Powder Flowable Agent HA230 should be screened at several low addition levels rather than assigned one universal dosage.

Dry Powder Flowable Agent HA230 quality can be monitored through appearance, melting range, total amide content, acid value, iodine value, moisture, and particle-size distribution.
Dry Powder Flowable Agent HA230 exact specification limits are grade dependent and should be verified through the current certificate of analysis.

Dry Powder Flowable Agent HA230 has low volatility at ordinary warehouse temperatures but can form airborne particulate during transfer.
Dry Powder Flowable Agent HA230 should be protected from heat because softening, agglomeration, discoloration, and oxidation can occur during unsuitable storage.

PROPERTIES

Representative Chemical: Oleamide

Chemical Name: (Z)-Octadec-9-enamide

Chemical Class: Unsaturated C18 Fatty Acid Amide

CAS Number: 301-02-0

EC Number: 206-103-9

Molecular Formula: C₁₈H₃₅NO

Molecular Weight: 281.48 g/mol

Physical Form: Powder, Beads, Granules, or Waxy Solid

Appearance: White to Off-White

Melting Range: Commonly Approximately 68–82°C, Grade Dependent

Water Solubility: Practically Insoluble

Primary Functions: Dry-Flow Improvement, Lubrication, Slip, Anti-Blocking, and Friction Reduction

Main Uses: Powder Coatings, Thermoplastic Powders, Polymer Compounds, Masterbatches, and Inks

Main Handling Concern: Airborne Dust and Heat-Induced Caking or Softening

Storage: Cool, Dry, Tightly Closed, and Protected from Heat, Moisture, Oxidation, and Contamination

FIRST AID

Inhalation

Dry Powder Flowable Agent HA230 dust exposure should be followed by movement to fresh air and rest in a position comfortable for breathing.
Dry Powder Flowable Agent HA230 inhalation requires medical attention if coughing, throat irritation, wheezing, or breathing difficulty persists.

Skin Contact

Dry Powder Flowable Agent HA230 contamination should be removed from the skin using soap and plenty of water.
Dry Powder Flowable Agent HA230 skin exposure requires medical advice if persistent redness, itching, irritation, or another adverse response develops.

Eye Contact

Dry Powder Flowable Agent HA230 eye exposure should be rinsed immediately with clean running water for at least 15 minutes.
Dry Powder Flowable Agent HA230 eye exposure requires contact-lens removal when easy and medical attention if pain, redness, or visual disturbance persists.

Ingestion

Dry Powder Flowable Agent HA230 accidental ingestion should be followed by rinsing of the mouth without inducing vomiting.
Dry Powder Flowable Agent HA230 ingestion requires medical advice when a substantial quantity is swallowed or symptoms develop.

Note to Physicians

Dry Powder Flowable Agent HA230 exposure should be treated symptomatically with appropriate supportive care.
Dry Powder Flowable Agent HA230 assessment should consider grade purity, physical form, quantity, exposure route, symptoms, and current Safety Data Sheet.

HANDLING AND STORAGE

Handling

Dry Powder Flowable Agent HA230 should be handled using methods that minimize dust generation, contamination, and uncontrolled heating.
Dry Powder Flowable Agent HA230 should be kept away from food, drink, strong oxidizing agents, open flames, and incompatible chemicals.

Ventilation

Dry Powder Flowable Agent HA230 weighing, charging, mixing, grinding, and transfer areas should have effective general ventilation and local dust extraction.
Dry Powder Flowable Agent HA230 respiratory protection should be used when engineering controls cannot adequately limit airborne dust.

Storage

Dry Powder Flowable Agent HA230 should be stored in tightly closed containers within a cool, dry, clean, and well-ventilated area.
Dry Powder Flowable Agent HA230 should be protected from direct sunlight, excessive heat, humidity, oxidizing agents, contamination, and damaged packaging.

Spill and Leak Procedures

Dry Powder Flowable Agent HA230 spills should be collected using suitable filtered vacuum equipment or another low-dust recovery method.
Dry Powder Flowable Agent HA230 should be kept out of drains and waterways, and loose powder should be removed because it can create a slipping hazard.

Handling Precautions

Dry Powder Flowable Agent HA230 handling should include suitable gloves, protective clothing, safety goggles, and dust protection where required.
Dry Powder Flowable Agent HA230 processing should follow the current grade-specific Safety Data Sheet, temperature limits, housekeeping procedures, and combustible-dust assessment.