PRODUCTS

E914 (Oxidized Polyethylene Wax)

OXIDISED POLYETHYLENE WAX (OPE) = POLYETHYLENE WAX = OXIDISED PE-WAX

CAS. Number: 68441-17-8
Molecular Formula: C51H102O21Si2

E914 (Oxidized Polyethylene Wax) is an excellent new type of polar wax.
Because the molecular chain of E914 (Oxidized Polyethylene Wax) has a certain amount of carbonyl groups and hydroxyl groups, the compatibility with fillers, pigments, and polar resins is significantly improved.
Wettability and dispersibility in polar systems is better than polyethylene wax, and E914 (Oxidized Polyethylene Wax)e also has coupling properties.

E914 (Oxidized Polyethylene Wax) are used as lubricants in the processing of plastics such as polyvinylchloride to prevent the plastic from sticking to the hot surfaces in the machinery, which saves energy and enhances the material properties of products such as PVC pipes and profiles.
White powder, lumpy or flakes with flowability.

E914 (Oxidized Polyethylene Wax) (OPE) is a partly oxidized product of polyethylene wax, Since some carboxyl and hydroxyl groups are in molecular chain, E914 (Oxidized Polyethylene Wax) (OPE) compatibility with polar resins is greatly improved, thus Oxidized E914 (Oxidized Polyethylene Wax) has excellent internal and external lubrication performance and is soluble in aromatic hydrocarbons.
E914 (Oxidized Polyethylene Wax) molecular chain has a certain amount of carbonyl and hydroxyl groups, so the solubility with fillers, pigments, polar resin will be significantly improved.

In polar system, wettability and dispersibility are better than those of polyethylene wax, and also have coupling property.
E914 (Oxidized Polyethylene Wax) has low viscosity, high softening point, good hardness and other properties, and itself non-toxic, good thermal stability, high-temperature volatility, E914 (Oxidized Polyethylene Wax) has a good dispersion for fillers and pigments.
E914 (Oxidized Polyethylene Wax) has both excellent external lubrication and strong internal lubrication, as well as coupling effect, which can improve the production efficiency of plastic processing and reduce the production cost.

E914 (Oxidized Polyethylene Wax) has good compatibility with polyolefin resin, etc.
E914 (Oxidized Polyethylene Wax) has good moisture resistance at room temperature, strong chemical resistance, excellent electrical performance, and can improve the appearance of finished products.

Compatible with polyethylene (PE), polypropylene (PP), polyvinyl acetate, polyvinyl chloride (PVC), ethylene-propylene rubber and butyl rubber.
Improve fluidity of PE, PP and ABS (acrylonitrile butadiene styrene); enhance mould release of polymethyl methacrylate (PMMA) and polycarbonate (PC).
Stronger internal lubrication in contrast with PVC and external lubricant.

Polyethylene wax (PE wax), also known as polymer wax referred to as polyethylene wax.
Because of its excellent cold resistance, heat resistance, chemical resistance and wear resistance and widely used.
In normal production, this part of the wax as an additive can be directly added to the polyolefin processing, E914 (Oxidized Polyethylene Wax) can increase the product of the optical translation and processing performance.
As a lubricant, E914 (Oxidized Polyethylene Wax)'s chemical properties are stable, good electrical properties.

And the E914 (Oxidized Polyethylene Wax) molecular chain with a certain amount of carbonyl and hydroxyl, E914 (Oxidized Polyethylene Wax) is a good new type of polar wax, so with the filler, pigment, polar resin compatibility has been significantly improved, lubricity, excellent dispersion In the polyethylene wax, but also both coupling.
E914 (Oxidized Polyethylene Wax) and polyolefin resin have good compatibility, good moisture resistance at room temperature, good resistance to chemicals, excellent electrical properties, can improve the appearance of finished products, with low viscosity, high softening point, good hardness Such as special properties, non-toxic, hot.

PRODUCT DESCRIPTION:
-Chemical Characteristic :
Low adhesive, high softening point and good hardness with stable chemical characteristics of good heat stability, good dispersion performance, no frost and mucous membrane; as an ideal interior & exterior lubricant, it can be used as a substitute for liquid paraffin, natural paraffin etc

-Properties:
White particle,flake or powder, with good lubricant effect, chemical durability and good electrical performance, soluble in aromatic hydrocarbon.
-Composition:
Low molecular weight polyethylene with hydroxy and carboxy.

-E914 (Oxidized Polyethylene Wax) could effectively improve the processing liquidity of PVC heat stabilizer.
-E914 (Oxidized Polyethylene Wax) does not contain heavy metal.
-E914 (Oxidized Polyethylene Wax) increases the extrusion efficiency of PVC products.

-E914 (Oxidized Polyethylene Wax) could effectively control the processing aggregation.
-E914 (Oxidized Polyethylene Wax) improves the surface finish.
-E914 (Oxidized Polyethylene Wax) can effectively solve the precipitation phenomenon in the processing of PVC heat stabilizer.
-E914 (Oxidized Polyethylene Wax) is approved SGS inspection and meets ROSH standard.

USES and APPLICATIONS of OXIDISED POLYETHYLENE WAX:
-For producing Emulsion PE Wax
–Lubricant for polyolefin and polyolefin Compounds
–Anti sticking effect and promote gelation in PVC
–Optimum lubrication, good aesthetical appearance and high profile quality in wood plastic composite
-Used as dispersant, lubricant, brightener and coupling agent for color masterbatch, polypropylene masterbatch, additive masterbatch and filling masterbatch and other pigments or fillers.

-Act as the lubricant, cost-saving agent and release agent in the course of extruding, calendering, injecting, blowing molding of PE, PP and other plastic.
-Act as the dispersant for masterbatches, pigment, carbon black, additive for parent material, filling parent material and other pigments.
-Applied in the field of hot melt road marking material.
-Act as the additive for shoeshine, floor wax, car wax, polishing wax, chinaware, pill wax, paint, coating, cable, carbon paper, wax paper, textile softening agent etc.

-The additive for rubber process and car anti-rust agent etc.
-PVC film, profile, pipe, plastic processing.
-After emulsification, used for paper industry, printing and dyeing and garment industry, water-based ink, water-based shoe polish.
-Hot melt glue, adhesives.
-With good compatibility, provide good internal and external lubrication, and dispersion.
Improve surface smoothness, promote plasticizing, demoulding and yield.

-As a good dispersion emulsifier, release agent, improve flexibility and moisture resistance.
-E914 (Oxidized Polyethylene Wax) can also be emulsified in water. Wax emulsions are applied as finishes to textiles in order to obtain a smoother surface in order to make them easier to sew and to make them more resistant to linting and pilling.
-Polyethylene waxes are used in polishes applied to shoes, furniture, floors and car bodywork and wax emulsions to protect the surface, to provide gloss or to enhance safety by increasing the slip resistance.
-Addition of wax emulsions to the coating of glossy magazines protects the surface against ink rub-off.

-A thin layer of wax can also be applied to the skin of citrus fruit to prevent it from drying out and becoming bruised.
-E914 (Oxidized Polyethylene Wax) (OPE) is widely used in processing of packing materials and thermoshrink film as external lubricant.
-E914 (Oxidized Polyethylene Wax) (OPE) is used as processing auxiliaries for PVC shapes, pipes and plates to increase the surface smoothness of the processed products with an amount of 0.3-0.5%.
-E914 (Oxidized Polyethylene Wax) (OPE) can increase the demoulding property effectively and reduce mould-cleaning time significantly in processing plastic products.

-E914 (Oxidized Polyethylene Wax) (OPE) can be also used as new-type lubricating agent with excellent performance for plastics of PVC and polyolefin, etc.
-E914 (Oxidized Polyethylene Wax) (OPE) raises lubrication between plastics and metals, improves dispersion of coloring agents and provides products with nice transparency and brightness.
-E914 (Oxidized Polyethylene Wax) (OPE) can be used as softening and anti-puncturing agents for textiles.

-E914 (Oxidized Polyethylene Wax) (OPE) is also widely used in car wax and leather auxiliaries.
-Used as processing auxiliaries for PVC shapes, pipes and plates to increase the surface smoothness.
Offers very good internal and external lubrication performance.
-Textile industry
-Cosmetics industry
-Leather production

-Stationery products
-Paint industry
-Food packaging
-Cable industry
-Window profile edge tape

-In the plastic processing industry, the internal and external lubrication of PVC is more balanced.
The lubricity of E914 (Oxidized Polyethylene Wax) is superior to other lubricants when E914 (Oxidized Polyethylene Wax) is added to the rigid, transparent and opaque PVC formula.
E914 (Oxidized Polyethylene Wax) is widely used in PE, PVC cable production, PVC profiles, pipe production, is an excellent new plastic processing lubricant.
E914 (Oxidized Polyethylene Wax) can also be used in textile softener, car wax, leather softener making raw materials.

-E914 (Oxidized Polyethylene Wax) is used as lubricant for rubber and plastic processing, a demulsifier and a phase solvent, Eva Wax has a good miscibility with all kinds of rubber.
Because of E914 (Oxidized Polyethylene Wax) high melting point and low viscosity, E914 (Oxidized Polyethylene Wax) promotes good resin fluidity, relatively reduces the power consumption of resin mixing, and reduces the adhesion between resin and mould, easy to get out of the film, plays the role of internal and external lubrication, and has a good anti-static.

-E914 (Oxidized Polyethylene Wax) is used as a dispersant of ink, anti-rub agent.
-E914 (Oxidized Polyethylene Wax) is used as viscosity regulator of thermal sol.
-Rubber processing auxiliaries, automobile bottom oil, dental materials processing auxiliaries, iron and steel antirust agent, etc.
-At present, E914 (Oxidized Polyethylene Wax) is used in a lot of foamed board, PVC foamed board is the most difficult PVC products to produce, is the most difficult to solve the most problems, the addition of E914 (Oxidized Polyethylene Wax) can significantly accelerate the plasticization, here we can see the uniqueness of E914 (Oxidized Polyethylene Wax).

-Shoe polish
-Floor wax
-Wax polish
-Car wax,
-Cosmetics,
-Matches wax rod,
-Wear-resisting agent of printing ink,

-Ceramics,
-Precision casting,
-Oil absorbent,
-Sealing daub,
-Chinese medicine wax pill,
-Hot melt adhesives,
-Paint and coating flatting agent,
-Cable feed additive,

-Crayon,
-Carbon paper,
-Waxed paper,
-Inkpad,
-Photographic materials,
-Textile softener,
-Matrix electronics packet agent,
-Rubber sealant,
-Transistor

-In PVC system, low density E914 (Oxidized Polyethylene Wax) can be plasticized ahead of time, and the later torque is reduced.
E914 (Oxidized Polyethylene Wax) has excellent internal and external lubrication.
E914 (Oxidized Polyethylene Wax) can improve the dispersity of colorant, give products a good luster and improve production efficiency.

-E914 (Oxidized Polyethylene Wax), also known as polymer wax, because of E914 (Oxidized Polyethylene Wax)'s excellent cold resistance, heat resistance, chemical resistance and wear resistance.
E914 (Oxidized Polyethylene Wax) is widely used in the production of color masterbatch, filler masterbatch, PVC products, hot melt adhesive, road marking paint, stabilizer, asphalt modification, coating powder and wax emulsions, etc.
In normal production, this part of wax can be directly added to polyolefin processing as an additive, which can increase the luster and processing performance of products.
As a lubricant, E914 (Oxidized Polyethylene Wax) has stable chemical properties and good electrical properties.

-E914 (Oxidized Polyethylene Wax) has good solubility with polyethylene, polypropylene, polyvinyl wax, ethylene propylene rubber and butyl rubber.
E914 (Oxidized Polyethylene Wax) can improve the fluidity of polyethylene, polypropylene, ABS and the demoulding performance of polymethylmethacrylate and polycarbonate.
Compared with other external lubricants, polyethylene wax has stronger internal lubrication for PVC.

-Namely polyethylene with low molecular weight.
Softening point (> 100? ), which is similar to polyethylene with high molecular weight; viscosity and rigidity for dissolving and melting are close to paraffine wax.
Excellent lubricant and dispersant with stable chemical and electrical performance.
Soluble in hydrocarbon polymer (aromatic).
E914 (Oxidized Polyethylene Wax) has molecular chain with hydroxy, therefore E914 (Oxidized Polyethylene Wax) has better compatibility with polar polymer.
Excellent lubricant (internal and external) and dispersant for PVC.

-In addition, good for printing ink, paper, condensed masterbatch, photo/biodegradable masterbatch, mulching film, candle, paint, adhesive and cement.
-Rigid PVC (transparent and opaque), PVC moulding and tubing, PE/PVC material for cable and wire, softner material for spinning and weaving, car wax and leather.

-E914 (Oxidized Polyethylene Wax) are designed for PVC extrusion systems, E914 (Oxidized Polyethylene Wax)'s low melting point allows ideal for external lubrication of the tooling to protect the mass without affecting the mechanical properties of the finished product.
-E914 (Oxidized Polyethylene Wax) enables extrusion systems work in a PHR level of 0.07 to 0.3, depending on the load and operating conditions.
-Additives in PVC processing, hot melt adhesives, textile finishing, cardboard and paper industries, moisture release agents, coatings, precision casting mold, plastic packaging.

-E914 (Oxidized Polyethylene Wax) is used as rubber and plastic processing lubricant, release agent and phase solvent, especially suitable for PVC foam products and rigid PVC transparent and non-transparent products.
-E914 (Oxidized Polyethylene Wax) is used as processing aids for emulsions, paints, hot melt adhesives, shoe polishes, floor wax and various waxes.
-E914 (Oxidized Polyethylene Wax) is used as Dispersants, lubricants, brighteners, coupling agents in pigments or fillers of various masterbatches.
-E914 (Oxidized Polyethylene Wax) is used as a dispersant and anti-rub agents for paints and inks.

-Hot melt glue, adhesives.
-Plastic processing
-Lubricant for PVC
-Paraffin compounding, candle industry
-Increase on solidification and drop points
-Applications as water-based Emulsions:
-Textile Industry
-Plasticizer component
-Improvement of cross-linking properties, tear resistance and smoothing of fabrics

-Slip agent for sewing threads
-Paper industry
-For surface finishing
-Printing Inks
-As anti-blocking / slip agent
-Agent for abrasion prevention in aqueous printing inks
-Die-casting industry
-As release agent
-Fruit coating

-Suitable for all kinds of natural fiber content, cotton, polyester/cotton fabric, chemical fiber wool-like fabric post-processing, especially suitable for Cotton, polyester/cotton of hydrophilic soft finishing, polyester prevent hair and other wool fabric after treatment.
-E914 (Oxidized Polyethylene Wax) is used for water paint, paper, leather industry, a new generation of high quality brightener.
-PVC film, profile, pipe, plastic processing;
-After emulsification, used for paper industry, printing and dyeing and garment industry, water-based ink, water-based shoe polish.

THE ROLE of OXIDISED POLYETHYLENE WAX IN PVC:
The role of pvc lubricants is to reduce friction between the polymer and the equipment, as well as internal friction between the polymer molecular chains.
E914 (Oxidized Polyethylene Wax) have a higher oxidation level and external lubricating properties.
The part of E914 (Oxidized Polyethylene Wax) structure which is compatible with plastic in polarity plays the role of internal lubrication, and the part which is incompatible with plastic in polarity plays the role of external lubrication and mold release.

The role of PVC external lubricant in PVC film in soft product formulations, the amount of lubricant is too much, it will frost and affect the strength of the product and high-frequency welding and printability.
And too little lubricant will stick to the rollers, and for blown film, too little lubricant will stick to the mouth mold and easily make the plastic coke in the mold.
In order to improve the sticky phenomenon of blown film, it is appropriate to add a small amount of internal lubricant monoglyceride.

When producing PVC soft products, the amount of lubricant added is generally less than 1 part.
In hard PVC plastics, excessive lubricant will lead to strength reduction and also affect the process operation.
For injected products peeling can occur, especially near the gate.
For injected products, the total amount of stearic acid and paraffin wax is generally 0.5~1 part: for extruded products, it is generally no more than 1 part.

E914 (Oxidized Polyethylene Wax) has special properties such as low viscosity, high softening point and good hardness, non-toxic, good thermal stability, low volatility at high temperature, excellent dispersion of fillers and pigments, excellent external lubricity and strong internal lubrication, also has coupling effect, which can improve the production efficiency of plastic processing and reduce the production cost, and has good compatibility with polyolefin resins and so on.

In the plastic processing industry, E914 (Oxidized Polyethylene Wax)'s for PVC has a more balanced internal and external lubricating effect.
Adding E914 (Oxidized Polyethylene Wax) to hard transparent and PVC formulations it's lubricity is better than other lubricants.
E914 (Oxidized Polyethylene Wax) is widely used in PE and PVC cable making, PVC profile and pipe making.

BENEFITS of OXIDISED POLYETHYLENE WAX:
-Internal Lubricant / external rigid PVC extrusion.
-Decreases the plate out.
-Low PHR Dosages.
-Improvements in process, a decrease in amperage, low melt temperature and higher productivity under certain formulation and process conditions.
-Presentation optima that offers improved mixing.
-With good compatibility, provide good internal and external lubrication, and dispersion.
-Improve surface smoothness, promote plasticizing, demoulding and yield.
-As a good dispersion emulsifier, release agent, improve flexibility and moisture resistance.
-Increase the intensity, glossiness, combustion complete, no black smoke.
-Improve the dispersion, improve the appearance of the finished product.

PROPERTIES of OXIDISED POLYETHYLENE WAX:
-High softening point and good hardness
-Increase the plastification and flowability of the melt.
-Enhance demoulding, perfect glossiness and increase production cycle.
-Compared with normal polyethylene was, E914 (Oxidized Polyethylene Wax) significantly improve the compatibility with emulsion, filler, pigment, resin and has better property of dispersion.

-Improved fabric, paper, leather products and coating film hand sensibility, smoothness, light resistance, smooth softness good function.
-E914 (Oxidized Polyethylene Wax) is used in the production of high performance coating anti-settling wax slurry, textiles slip agent (cowboy cloth material), printing paste, wax emulsion, floor polishes, fruit fresh paint, oil polish and so on.
-E914 (Oxidized Polyethylene Wax) thermal stability is good, not yellow.
-In the textile industry, mainly used for softening agent and sizing agent, finishing agent.
Make the finished fabric has soft and smooth handle, at the same time improve the physical properties of the fabric.

-In man-made board industry, instead of paraffin waterproofing agent can get obvious effect.
-Polyurethane unemployment and other process good release agent.
-E914 (Oxidized Polyethylene Wax) acid and alkali resistance, good chemical stability.
-E914 (Oxidized Polyethylene Wax) non-toxic, no corrosion, non-inflammable non-dangerous goods, do not contain the free formaldehyde, APEO, phosphorus, etc. is environmental protection product.

OXIDISED POLYETHYLENE WAX CAN BE USED IN ALUMINUM ALLOY RELEASE AGENT:
E914 (Oxidized Polyethylene Wax) used as a release agent, rarely heard, but polyethylene wax used in the release agent a lot.
Domestic and imported major differences are: raw materials and production process technology differences, and thus the quality difference is relatively large, if the domestic production by foreign regular, good raw materials and foreign technology, the production cost is much higher than the import.
Because the domestic production technology is not mature, high cost.

WHAT IS THE MOLECULAR FORMULA of THE OXIDISED POLYETHYLENE WAX?
(A)
Chemical composition, opaque PVC formula added in the oxidation of polyethylene wax lubrication is better than other lubricants.
white slightly yellowish powder.
hydroxyl, carboxyl low molecular weight polyethylene.
(B)
Traits, car wax, So its compatibility with the polar resin has been significantly improved due to the oxidation of polyethylene wax molecular chain with a certain hydroxyl, pipe production.
E914 (Oxidized Polyethylene Wax) is widely used in PE.
In the rigid transparent, PVC profiles.
On the PVC, after all, excellent new plastic processing lubricant, soluble in aromatic hydrocarbons, external lubrication is more balanced, better than polyethylene wax.
Can also be used for textile softener, leather softener production of raw and auxiliary materials, PVC cable production.
(C)
E914 (Oxidized Polyethylene Wax) is used, with good chemical stability.

THE DIFFERENCE BETWEEN POLYETHYLENE, POLYETHYLENE WAX AND OXIDISED POLYETHYLENE WAX:
Raw materials are ethylene.
Polyethylene is a molecular weight greater than hundreds of thousands of polyethylene.
Is the main raw material of plastic polyethylene wax is the molecular weight of tens of thousands of the following.
E914 (Oxidized Polyethylene Wax) is usually used as a lubricant.

E914 (Oxidized Polyethylene Wax) is a kind of polyethylene wax, but is produced in different ways, is produced by carbon monoxide and so on.
But the molecular weight distribution is not very good.
Polyethylene wax is not produced by slurry polymerization.
But the domestic is not through the slurry polymerization to produce.

WHAT IS THE DIFFERENCE BETWEEN POLYETHYLENE WAX AND OXIDISED POLYETHYLENE WAX?
Polyethylene wax and E914 (Oxidized Polyethylene Wax) are indispensable chemical materials and can be widely used in all walks of life.

*Physical and chemical properties of polyethylene wax:
Polyethylene wax (PE wax), also known as polymer wax referred to as polyethylene wax.
Polyethylene wax is widely used for its excellent cold resistance, heat resistance, chemical resistance and abrasion resistance.
In normal production, Polyethylene wax can be added directly to polyolefin processing as an additive, which can increase the phototranslation and processing performance of the product.
As a lubricant, Polyethylene wax's chemical properties are stable and Polyethylene wax's electrical properties are good.

Polyethylene wax (PE wax), also known as polymer wax, is called polyethylene wax.
Widely used due to its excellent cold resistance, heat resistance, chemical resistance and wear resistance.
In normal production, this part of the wax can be directly added to the polyolefin processing as an additive, which can increase the optical translation and processing properties of the product.
As a lubricant, Polyethylene wax is chemically stable and has good electrical properties.

*Analysis of the role of E914 (Oxidized Polyethylene Wax):
E914 (Oxidized Polyethylene Wax) and polyolefin resin has good compatibility, in normal temperature moisture resistant performance is good, chemical resistant ability, excellent, can improve the look of the finished product, has low viscosity, high softening point, hardness is good special performance, such as non-toxicity, good thermal stability, high temperature and low volatility, excellent dispersity of fillers, pigments, both excellent external lubricity, and strong internal lubrication, also have coupling effect, can improve the production efficiency of plastic processing, reduce the production cost.

E914 (Oxidized Polyethylene Wax) has good compatibility with polyolefin resin:
E914 (Oxidized Polyethylene Wax) has good moisture resistance at normal temperature, strong chemical resistance, excellent electrical properties, can improve the appearance of finished products, and has low viscosity, high softening point and good hardness.
E914 (Oxidized Polyethylene Wax) has special properties, non-toxicity, good thermal stability, low volatility at high temperature, excellent dispersibility for fillers and pigments, excellent external lubricity, strong internal lubrication and coupling.
E914 (Oxidized Polyethylene Wax) can improve the production efficiency of plastic processing and reduce production costs.

The E914 (Oxidized Polyethylene Wax) molecular chain has a certain amount of carbonyl and hydroxyl groups, and the E914 (Oxidized Polyethylene Wax) is an excellent new polar wax, so the compatibility with fillers, pigments and polar resins is significantly improved, and the lubricity and dispersibility are better.
Polyethylene wax, but also coupled.

The molecular chain of E914 (Oxidized Polyethylene Wax) contains a certain amount of carbonyl and hydroxyl groups, and E914 (Oxidized Polyethylene Wax) is an excellent new polar wax, so E914 (Oxidized Polyethylene Wax)'s solubility with fillers, pigments and polar resins is significantly improved, and E914 (Oxidized Polyethylene Wax)'s lubricity and dispersibility are better than polyethylene wax, and E914 (Oxidized Polyethylene Wax) also has coupling property.
Polyethylene wax is well soluble with polyethylene, polypropylene, polycerate ethylene, ethylene-propylene rubber and butyl rubber.

Polyethylene wax can improve the fluidity of polyethylene, polypropylene, ABS and demodulation of polymethyl methacrylate and polycarbonate.
Compared with other external lubricants, polyethylene wax has stronger internal lubrication for PVC.
Polyethylene wax and E914 (Oxidized Polyethylene Wax) are ideal products to replace montan wax, sichuan wax, liquid paraffin, microcrystalline paraffin and natural paraffin.

The polyethylene wax has good compatibility with polyethylene, polypropylene, polyglycolic acid ethylene, ethylene propylene rubber and butyl rubber.
The polyethylene wax can improve the fluidity of polyethylene, polypropylene and ABS and the release property of polymethyl methacrylate and polycarbonate.
Polyethylene wax has a stronger internal lubrication effect than PVC and other external lubricants.

Polyethylene wax and E914 (Oxidized Polyethylene Wax) are ideal products to replace montan wax, wax, liquid paraffin, microcrystalline paraffin, natural paraffin and the like.

PHYSICAL and CHEMICAL PROPERTIES of OXIDISED POLYETHYLENE WAX:
Softening point (°C): 90-110
Density (g/cm3): 0.94-0.96
Acid index (mg KOH/g): 12-15
Acid value: 10 - 13 KOH mg/g 13 - 16 KOH mg/g 4 - 10 KOH mg/g
Softening Point℃: 100-105
ViscosityCPS@140℃: 200-300
Acid Value Mg KOH/g: 15-20
Appearance: White bead
Appearance: white powder with light yellow
Molecular weight: 3,000-4,000

OXIDISED POLYETHYLENE WAXES PROVIDE THE FOLLOWING PROPERTIES:
-Melting temperatures
-Structure, crystallinity, melting heat
-Crystallization temperature and heat
-Melt viscosity
-Polarity, reactivity
-Chemical inertnessHardness

-Gloss
-Dispersability
-Emulsification
-Adhesion
-Hydrophobic properties
-Thermostability
-Film forming

HANDLING AND STORAGE of OXIDISED POLYETHYLENE WAX:
No decomposition at room temperature, but should be stored in a cool and dry place.

SYNONYMS:
Poe
Ployoxyethylene
Oxidized polyethylene
Oxidizedpolyethylene
Oxidizedpolyethylenewaxes
Ethene, homopolymer, oxidized
Polyethylene,oxidised
Oxidizedpolyethylenewax
Ethene,homopolymer,oxidized
Oxidisedpolyethylenewax
Polyethylene, oxidiz
E914 (Oxidized Polyethylene Wax)
Poly(ethylene) oxidized
Polyethylene, oxidized