ELTESOL SC 40

It is used as a solvent and viscosity regulator in dishwasher detergents and liquid detergents. Its use in detergents varies between 0.5% and 5%.
Sodium cumene sulphonate, systematically known as sodium 4-isopropylbenzene sulphonate, is a clear-looking, moisturizing organic compound. The word cumene means isopropylbenzene.

Commercial production is carried out using benzene and propylene with the Friedel-Crafts alkylation process.The most preferred method for its production was the alkylation of benzene in liquid phase with sulfuric acid catalysis, but this method has undergone some changes due to the corrosion reasons due to the complicated neutralization processes and recycling steps required. . Another method is to support it with alumina in solid phosphoric acid (SPA) catalysis.

One of the main uses of sodium cumene sulfonate is its use as a surfactant. It is used for viscosity control and dissolving (hydrotropy) processes in hand soap and dishwashing detergents.

It is used as phase solvent in cosmetics and detergent product manufacturing. When used as phase solvent, the amount of use may vary depending on the state of the phase and the amount of raw materials used.

It is used as a solvent and viscosity regulator.

Sodium Cumenesulfonate. ELTESOL SC 40  acts as a solubilizer, coupling- and viscosity modifying agent. It increases the cloud point of non-ionics. It is used in shower and bath products, baby care products, shampoo and liquid soaps. It is recommended for the use in cosmetic products based on ammonium and amine salts.
Product Application
Hydrotrope, solubilizer, coupling agent, cloud point depressant, viscosity reducer, an anti-caking agent in powdered detergent.

ELTESOL® SC 40 is an aqueous solution of a sodium cumene sulphonate. This product acts as a hydrotrope and may be used to increase the solubility of other compounds. In conjunction with non-ionic surfactants, it will raise the cloud point of the solution allowing clear liquids to be obtained at higher temperatures, enabling additional control of the foaming characteristics and performance. It may also be used to reduce the viscosity of concentrated surfactants and formulations.

applications :
Hydrotropes are used in a variety of household detergent and cleaning products including laundry
powders and liquids, liquid fabric conditioners, liquid and powder laundry bleach additives, hand
dishwashing liquid, machine dishwashing liquid, liquid and gel toilet cleaners, and liquid, powder, gel
and spray surface cleaners.

Product and Process Description

Sodium cumene sulphonate (SCS) is an anionic surfactant and acts as hydrotropes to modify
solubilities, viscosities, and other properties of surfactants and surfactant formulations.
SCS is produced by the sulphonation of cumene followed by neutralization with sodium hydroxide.
Sulphonation step: involves the use of oleum, a solution of SO3 in sulphuric acid.
Neutralization step: The generated aromatic sulphonic acid is converted to their respective salts by
neutralization with sodium hydroxide to produce the sodium sulphonate. The neutralization is
conveniently done in water, since the sulphonates, and even more so the short alkyl chain
hydrotropes, are generally water soluble to the extent of 30–50%.
Post‐processing step: can involve a solvent extraction to remove sulphones and chemical bleaching.
If solvent extraction is done, traces of solvent must be removed by distillation, usually as the azeotrope. For a low sulphate product treatment with lime may be necessary.

ELTESOL® SC 40 is an aqueous solution of a sodium cumene sulphonate. This product acts as a hydrotrope and may be used to increase the solubility of other compounds. In conjunction with non-ionic surfactants, it will raise the cloud point of the solution allowing clear liquids to be obtained at higher temperatures, enabling additional control of the foaming characteristics and performance. It may also be used to reduce the viscosity of concentrated surfactants and formulations.

Market
Home Care
Industrial Products
Institutional and Industrial Cleaning

Application
Automatic Dishwashing Detergents
Degreasers
Hand Dishwashing Detergents
Hard Surface Cleaners - Dilutable
Hard Surface Cleaners - Ready to Use
Laundry Detergents
Metalworking Cleaners
Warewash Detergents

Solubilizer, coupling agent, cloud point depressant, viscosity reducer, anti-caking agent in powdered detergent.
It is used as an electroplating bath additive and as viscosity reducer for concentrated liquid detergent and as solubilizer and cloud point depressor.
Effective in promoting the compatibility of various ingredients present in a multicomponent system.

SODIUM CUMENE SULFONATE 40% belong to the sulfates & sulfonates family and can be applied as hydrotrope for the Cleaning Products industry

Product Application : Hydrotrope, solubilizer, coupling agent, cloud point depressant, viscosity reducer, anti-caking agent in powdered detergent.
Hydrotropes are used in a variety of household detergent and cleaning products including laundry
powders and liquids, liquid fabric conditioners, liquid and powder laundry bleach additives, hand
dishwashing liquid, machine dishwashing liquid, liquid and gel toilet cleaners, and liquid, powder, gel
and spray surface cleaners.

Automatic dishwasher gels, Hand dishwashing soap, Hand dishwashing liquid, Laundry pods, Laundry gel, Automatic dishwasher liquid, Powder laundry detergent, Degreasers, Hand dishwashing powder, Automatic dishwasher tablets, Automatic dishwasher pods, Liquid laundry detergent

Detergent
It is used as solvent and viscosity regulator in the detergent detergent and liquid detergents as 0.5 to 5% intermediate phase solvent in detergent making.

Its functions (INCI)
Hydrotrope : Increases the solubility of a substance that is poorly soluble in water.
Surfactant : Reduces the surface tension of cosmetics and contributes to the even distribution of the product when it is used

STEPANATE® SCS is used in liquid detergent formulations as a solubilizer, coupling agent and cloud point depressant. Also useful in lowering the cloud point or crystallization temperature of complex blends.

Category

Anionic Surfactant

> Sulfonate

>> Aryl Sulfonate

>>> Phenyl Sulfonate

>>>> Linear Alkylphenyl Sulfonate

Tainolin SCS-40, dissolved in water can increase the solubility for low-soluble organic matter, lower down the cloud point of the aqueous formulated products, and reduce the viscousity of the aqueous products. The material also shows detergency.

The sodium cumenesulfonate market  from detergent end use segment is expected to grow by around 4.5% CAGR by 2026. Sodium 2-isopropylbenzenesulfonate is the largest end-user industry, in terms of product consumption. The detergent industry is anticipated to witness a strong growth due to increasing household income, rapid urbanization, rise in the middle-class population, and surge in the penetration of washing machines around the world. Furthermore, there is a rise in online channels and competitiveness in the this industry to keep product prices low & more affordable to the general population.
 

The Europe sodium cumenesulfonate market is expected to generate around USD 16,820 thousand revenue by 2026 owing to considerable growth in the detergent and chemical industries. Europe is the second-largest laundry detergent market. Better living standards, high disposable income, and high penetration of washing machines in the region will be responsible for most of the demand share and overall market growth. Europe is one of the prominent automotive hubs and thus houses the wide metal working industry. Growth in the automobile and aerospace manufacturing sectors in the region will drive product demand during the forecast period.

STEPANATE SCS-40 is a solubilizer, coupling agent and cloud point depressant used in heavy duty cleaners, wax strippers and dishwashing detergents, oil field and metal working applications.

Sodium Cumenesulfonate. ELTESOL® SC 40 by Huntsman acts as a solubilizer, coupling- and viscosity modifying agent. It increases the cloud point of non-ionics. It is used in shower and bath products, baby care products, shampoo and liquid soaps. It is recommended for the use in cosmetic products based on ammonium and amine salts.

First Aid Measures
Move the exposed person to fresh air. Keep the patient warm and at rest
Provide. Not breathing, if breathing is irregular or the airways are blocked.
Have a trained person administer artificial respiration or oxygen.
Assistance given by mouth-to-mouth breathing can be harmful to the person. if
If adverse health effects occur or are severe, seek medical attention. Consciousness
If loss occurs, position properly and seek medical attention immediately. Open
leave air intake. Tight parts of the garment such as collars, ties, belts or sashes.
loosen it.

Digestion:
Rinse by mouth rinsing. Remove dentures, if any. The exposed person
remove to fresh air. Keep the patient warm and at rest. Matter
If swallowed and the exposed person is unconscious, give a small amount of water to drink.
Stop if the exposed person feels unwell, as vomiting can be dangerous. Medicine
Do not induce vomiting unless specifically asked by their staff. If vomiting occurs
Keep it upside down to prevent vomit from getting into the lungs. If health related
If effects occur or are severe, seek medical attention. Unconscious
never give anything by mouth to a person. In case of loss of consciousness, position properly
and seek medical attention immediately. Leave an open air intake. Collar, tie,
Loosen the tight parts of the garment such as a belt or waistband.

skin contact:
Wash the contaminated skin area with copious amounts of running water. Dirty clothes
and take off the shoes. When symptoms occur, seek medical attention. Again
wash clothes before use. Before reuse, clean your shoes.
clean.

eye contact:
Rinse immediately with plenty of water and, where possible, keep the upper and lower eyelids open.
Check and remove contact lenses. Continue agitating for at least 10 minutes.
please. Seek medical help.

First aid workers
Protection: No action is taken without the necessary training or that could harm people. Oral
Assistance by breathing in the mouth may be harmful to the person.
Use

Put on appropriate personal protective equipment (see Section 8). The mine was moved,
Eating, drinking and smoking should be prohibited in places where it is stored and processed.
Workers should wash their hands before eating, drinking or smoking. Steam
or breathe mists. Do not swallow. Avoid contact with eyes, skin and clothing. Original
storage in its container or in an approved alternative packaging made of compatible material
keep the container tightly closed when not in use. Product in empty containers
it can become residue and be dangerous. Do not reuse the container.

Storage

Store in accordance with local regulations. It should be protected from direct sunlight,
in a cool, well-ventilated area, from incompatible materials (see
section 10) and store in original containers away from food and drink.
Keep container tightly closed and unsealed until ready for use.
Containers that have been opened must be carefully resealed tightly and prevent leakage.
must be held upright to avoid Do not store in unlabeled containers.
Use a suitable container so that it does not contaminate the environment through contamination and accumulation.

Methods of throwing

The generation of waste should be avoided or minimized as possible.
must be downloaded. Product residue may accumulate in empty containers or liners.
Safely dispose of waste and containers. Excessive and irreversible
disposal of products by a licensed waste disposal contractor.
Product disposal, melts and anything near the product,
environmental protection regulations and waste disposal laws and any
should always comply with the instructions of the local authority of the region. Spilled
from spreading of material, runoff and contact with garbage, drains, drains
Avoid it.