PRODUCTS

ETHYLENE BIS(STEARAMIDE)

CAS Number: 110-30-5
IUPAC name: N,N′-(Ethane-1,2-diyl)di(octadecanamide)
EC Number: 203-755-6
Chemical formula: C38H76N2O2

Ethylene bis(stearamide) is an organic compound with the formula (CH2NHC(O)C17H35)2.
Ethylene bis(stearamide) is a waxy white solid and is also found as powder or beads that is widely used as a form release agent.
The compound is derived from the reaction of ethylenediamine and stearic acid. It is a white solid of low toxicity that provides a slippery coating for a variety of applications.

Applications of Ethylene bis(stearamide):
Ethylene bis(stearamide) is a synthetic wax used as a dispersing agent or internal/external lubricant for benefits in plastic applications to facilitate and stabilize the dispersion of solid compounding materials to enhance processability, to decrease friction and abrasion of the polymer surface, and to contribute color stability and polymer degradation.

Ethylene bis(stearamide) is also used in process industries as release agent and antistatic agent for the production of thermoplastics,and wiring.
Ethylene bis(stearamide) is used in powder metallurgy.

Consumer Uses of Ethylene bis(stearamide):
Ethylene bis(stearamide) is used in the following products: adhesives and sealants, lubricants and greases, coating products, polishes and waxes and washing & cleaning products.
Other release to the environment of Ethylene bis(stearamide) is likely to occur from: indoor use (e.g. machine wash liquids/detergents, automotive care products, paints and coating or adhesives, fragrances and air fresheners), outdoor use, indoor use in long-life materials with low release rate (e.g. flooring, furniture, toys, construction materials, curtains, foot-wear, leather products, paper and cardboard products, electronic equipment), indoor use in close systems with minimal release (e.g. cooling liquids in refrigerators, oil-based electric heaters) and outdoor use in close systems with minimal release (e.g. hydraulic liquids in automotive suspension, lubricants in motor oil and break fluids).

Service life of Ethylene bis(stearamide):
Release to the environment of Ethylene bis(stearamide) can occur from industrial use: in processing aids at industrial sites, formulation in materials and as processing aid.
Other release to the environment of Ethylene bis(stearamide) is likely to occur from: outdoor use in long-life materials with high release rate (e.g. tyres, treated wooden products, treated textile and fabric, brake pads in trucks or cars, sanding of buildings (bridges, facades) or vehicles (ships)).
Ethylene bis(stearamide) can be found in products with material based on: rubber (e.g. tyres, shoes, toys) and fabrics, textiles and apparel (e.g. clothing, mattress, curtains or carpets, textile toys).

Widespread uses by professional workers:
Ethylene bis(stearamide) is used in the following products: washing & cleaning products, lubricants and greases, coating products, inks and toners and polishes and waxes.
Ethylene bis(stearamide) is used in the following areas: formulation of mixtures and/or re-packaging.
Ethylene bis(stearamide) is used for the manufacture of: rubber products and plastic products.
Other release to the environment of Ethylene bis(stearamide) is likely to occur from: indoor use (e.g. machine wash liquids/detergents, automotive care products, paints and coating or adhesives, fragrances and air fresheners) and outdoor use.

Formulation or re-packing of Ethylene bis(stearamide):
Ethylene bis(stearamide) is used in the following products: polymers, lubricants and greases, metal working fluids, pharmaceuticals and cosmetics and personal care products.
Release to the environment of Ethylene bis(stearamide) can occur from industrial use: formulation of mixtures, formulation in materials, as processing aid, manufacturing of the substance and in processing aids at industrial sites.

Uses at industrial sites of Ethylene bis(stearamide):
Ethylene bis(stearamide) is used in the following products: lubricants and greases, polymers, washing & cleaning products, inks and toners, metal working fluids, textile treatment products and dyes and coating products.
Ethylene bis(stearamide) is used in the following areas: formulation of mixtures and/or re-packaging and municipal supply (e.g. electricity, steam, gas, water) and sewage treatment.
Ethylene bis(stearamide) is used for the manufacture of: rubber products, textile, leather or fur, machinery and vehicles and chemicals.

Release to the environment of Ethylene bis(stearamide) can occur from industrial use: in processing aids at industrial sites, as processing aid, in the production of articles, formulation in materials, formulation of mixtures and of substances in closed systems with minimal release.
Other release to the environment of Ethylene bis(stearamide) is likely to occur from: indoor use (e.g. machine wash liquids/detergents, automotive care products, paints and coating or adhesives, fragrances and air fresheners).

Molecular Weight: 593.0
XLogP3-AA: 15.7
Hydrogen Bond Donor Count: 2
Hydrogen Bond Acceptor Count: 2

Rotatable Bond Count: 35
Exact Mass: 592.59067967
Monoisotopic Mass: 592.59067967
Topological Polar Surface Area: 58.2 Å²

Heavy Atom Count: 42
Complexity: 503
Isotope Atom Count: 0
Defined Atom Stereocenter Count: 0

Undefined Atom Stereocenter Count: 0
Defined Bond Stereocenter Count: 0
Undefined Bond Stereocenter Count: 0
Covalently-Bonded Unit Count: 1
Compound Is Canonicalized: Yes

Ethylene bis(stearamide) is an amide wax.
Ethylene bis(stearamide) is used in various industries as internal/external lubricant, mold release agent, dispersant and slip- and anti-blocking-agent. Because of its excellent lubricating properties, it is widely used internally and/or externally in most plastics such as ABS, PS, PP, etc.

Used as additive Ethylenebisstearamide can be incorporated directly into polymers to prevent any unwanted adhesion. Adhesive pellets or film often develop adhesion between the polymer pellets or layers when exposed to elevated temperatures and pressures.
Ethylene bis(stearamide) is used to prevent adhesive granulate from sticking together during storage, or to prevent adhesive film layers to attract dirt or stick together before application by reactivation or melting.
Ethylene bis(stearamide) can also be used as a process aid, for example to improve dispersion of fillers.

Ethylene bis(stearamide) can also be a binder in the precise engineering metal part.
Due to its good dispersing ability and surface migration EBS can be used in printing inks.
Another field of application is the bitumen industry: When used in asphalt binder for road making (asphalt modifiers), Ethylene bis(stearamide) increases its softening point and enhances its visco-elasticity.

Applications of Ethylene bis(stearamide):
Release agent and flow promoter for all engineering resins, Styrenics and their copolymers
Lubricant in powder metal molding, rubber, adhesives, coatings, wire drawing, wood plastic composite
Defoamer in paper
Lubricant for Polyacetals
Water repellent for paper
Intermediate for defoamers
Delustering agent for furniture finishes and printing inks
Dispersing agent for masterbatch applications, preferably for engineering resins and PVC
Modifier in textile auxiliaries

Used as anti-adhesive agent for various polymer film or sheets.
An addition of 0.5-1 % of it can not only prevent the occurrence of air bubbles but also make the plastic bags be slippery so as to be opened easily.

Ethylene bis(stearamide) can remarkably enhance the heat-resistant and weather-resistant properties while coordinating with chief stabilizer in formulation of inorganic filler for PVC and polyolefin. As Ethylene bis(stearamide) has strong cohesions with pigment or other filler, it can improve the dispersion and coupling property of fillers in the polymers to enhance the commercial value of the products.

Used as nucleation transparency agent to reduce the nucleating time in compounds such as polyolefins, polyformaldehyde and polyamide, promote the structure of resin to become fine, thus improve the mechanical property and transparency of the products.

Used as processing auxiliary of rubber.
Besides the lubricant demoulding property and modifying performance of filler surface, it can raise the surface fineness of rubber pipes and rubber plates to act as rubber surface polishing agent.
Ethylene bis(stearamide) improves the kneading, processing and vulcanization performance of rubber grains in the processing of rubber.

Added in the coating production to increase the uniform dispersion of pigment and filler, improve the surface leveling property of baking paint, prevent the stripping off of paint film and improve water-proof and acid-resistant and alkali-resistant property.
In nitrocellulose lacquers, it can bring about the flatting action.

Used as lubricant in powder metallurgy (PM) steels to reduce the inter-particle and die-wall friction during pressing and hence improve powder compressibility and ejection of the component from the compaction tool.

Used as defoamer/ anti-foaming agent and coating component of paper for paper-making industry.

Added in the manufacturing process of dope and oil paint to enhance salt mist and dampproof effect and to improve performance of paint remover.
As Ethylene bis(stearamide) has good wearable performance and smoothing performance, fits for improving polishing performance of lacquer, air release of surface with holes, it is also well used as dulling agent for polishing furniture and printing ink.

Applications of Ethylene bis(stearamide):
Ethylene bis(stearamide) can be used to improve the dispersion of halloysite nanotube into a polylactic acid matrix, which can be potentially used as biodegradable plastic.
Ethylene bis(stearamide) may also be used as a lubricant to improve the strength of high density polyethylene (HDPE)/wood composites.
Processing lubricants, release agents, antistats, pigment dispersing aids, oil-based antifoaming agent and additive to coatings.

Ethylene bis(stearamide) is synthetic wax that is widely used as a release agent, antistatic agent, and antifoaming agent.
Ethylene bis(stearamide) acts as a dispersing agent or internal/external lubricant in plastic applications to facilitate and stabilize the dispersion of solid compounding materials to enhance processability, to decrease friction and abrasion of the polymer surface, and to contribute color stability and polymer degradation.
Ethylene bis(stearamide) also finds use in adhesives and powder metallurgy.

Ethylene bis(stearamide) is a synthetic wax made by combining two stearic acid molecules with one molecule of ethylenediamine.
Together the resulting compound is a white, waxy solid that is sold as a powder in various mesh sizes.
Ethylene bis(stearamide) is non-toxic, has no smell and is not soluble in water at room temperature.
Ethylene bis(stearamide) has solubility in chlorinated or aromatic solvents.

The primary use for Ethylene bis(stearamide) is as a release agent for PVC (poly-vinyl chloride) extrusion.
Ethylene bis(stearamide) acts as both an internal and external lubricant to enhance malleability of the PVC resin.
Ethylene bis(stearamide) will inherently lower the viscosity of the polymer resin and can decrease friction and abrasion of the polymer surface.
Ethylene bis(stearamide) is also a dispersal agent and helps contribute to color uniformity and stability of the resulting extruded PVC product.
Adding Ethylene bis(stearamide) to your thermoforming process will increase productivity by reducing shear stress. The overall product has a high gloss finish, smooth surface and increased tensile strength.

Ethylene bis(stearamide) is not just for PVC thermoforming, it is suitable as an additive for nearly any thermoplastic manipulation with benefits similar to those described above for the PVC process. Ethylene bis(stearamide) can be used with ABS, polystyrene, polyethylene, polypropylene and more.
In plastic masterbatch applications it reduces the amount of resin/binder necessary which translates to cost savings.
Ethylene bis(stearamide) will also help with pigment dispersal and give the finished product a more vibrant glossy finish.

Ethylene bis(stearamide) is a widely used lubricant, high melting wax and white/yellow liquid. It has good compatibility applied in most of the plastics with the function of lubricating, dispersing, fusing, breaking, smoothing, anti-stick and anti-static.
Ethylene bis(stearamide) has excellent connectivity and dispersion on pigments and buffers.
Insoluble in organic solvents and water. Soluble in high boiling solvents such as xylene, chloroform and butanol.
The flash point is below 285°C and the density is 0.98 (25°C).

Tags: plastic additives , plastic industry additives , lubricant additives , ebs additives , ebs , Ethylene Bis Stearamide

Ethylene bis(stearamide) is a widely used lubricant, high melting wax and white/yellow liquid.
Ethylene bis(stearamide) has good compatibility applied in most of the plastics with the function of lubricating, dispersing, fusing, breaking, smoothing, anti-stick and anti-static.

Ethylene bis(stearamide) has excellent connectivity and dispersion on pigments and buffers.
Insoluble in organic solvents and water.
Soluble in high boiling solvents such as xylene, chloroform and butanol. The flash point is below 285°C and the density is 0.98 (25°C).

Ethylene bis(stearamide) is a lubricant widely used in molding and processing of PVC, ABS, high-impact polystyrene, polyolefin, rubber and plastic products.
High melting wax and white/yellow liquid.
Compared with traditional lubricants such as paraffin wax, polyethylene wax and stearate, it not only has good external lubricity, but also has good internal compatibility, applied in most plastics with good function.

Lubricating, dispersing, fusing, breaking, smoothing, anti-stick and anti-static properties.
Ethylene bis(stearamide) has excellent connectivity and dispersion on pigments and buffers.
Insoluble in organic solvents and water.
Soluble in high boiling solvents such as xylene, chloroform and butanol.
The flash point is below 285°C and the density is 0.98 (25°C).

Plastics
Internal and external lubricant, pigment stabilizer and dispersant in the processing of all types of
plastics.
Imparts a smooth gloss finish to rigid pvc; ımproves the general surface appearance of most plastics. The multiple functions of ebs in plastics production ımprove processing time and reduce processing costs.

Rubber
Release agent and additive to the surface finishing in the production of rubber.

Textiles and paper
Anti-static agent and anti-foaming agent in paper and textile production.

Other ındustrial uses
Modifier used in asphalt production to lower the temperature at which the asphalt will soften.

Ethylene bis(stearamide) is an organic compound with the formula (CH2NHC(O)C17H35)2.
Ethylene bis(stearamide) is a waxy white solid and is also found as powder or beads that is widely used as a form release agent.
The compound is derived from the reaction of ethylenediamine and stearic acid.
Ethylene bis(stearamide) is a white solid of low toxicity that provides a slippery coating for a variety of applications.

Applications of Ethylene bis(stearamide)
Ethylene bis(stearamide) is a synthetic wax used as a dispersing agent or internal/external lubricant for benefits in plastic applications to facilitate and stabilize the dispersion of solid compounding materials to enhance processability, to decrease friction and abrasion of the polymer surface, and to contribute color stability and polymer degradation.

Ethylene bis(stearamide) is a hard and brittle white high melting point wax, its industrial products are slightly yellow fine particles, non-toxic, no side effects on humans, insoluble in most solvents at room temperature, stable to acids and bases, and aqueous media, soluble in hot chlorinated hydrocarbons and aromatic hydrocarbons solvents, it’s powder slippery feeling strong, above 80 ℃ to water with wettability of the compound.

Application of Ethylene bis(stearamide)

Plastics
Used as an internal and external slip agent in many thermoplastic and thermosetting plastics, the most representative ones are ABS, PS, ABS, PVC, also used in PE, PP, PVAC, cellulose, Accurate, Nylon, phenolic-Resin, amino plastics, etc., with good brightness It has a good finish and good film release.

In the thermoplastic PUR injection molding process, the additive also acts as an internal film release agent, and the addition amount is 0.1~1%.
As a lubricant of polyformaldehyde, the addition amount is 0.5%, which improves the melt flow rate and the film release, and the whiteness, thermal stability and physical index of polyformaldehyde all reach the superior index.

Rubber
Synthetic resins and rubber such as Vinyl, polychloroprene, GRS (SBR) add 1~3% EBS to their emulsions, it has a good anti-viscosity and anti-caking effect, EBS is used in floor mats for automobiles, drainage pipes, and other rubber products to increase the effect of surface gloss.

Chemical fiber
Ethylene bis(stearamide) can improve the heat and weather resistance, fluidity of polyester, polyamide fiber, and give a certain anti-static effect.

Release agent
Phenolic resin for sand casting with Ethylene bis(stearamide) can be used as a release agent.

Pigment, filler dispersant
Ethylene bis(stearamide) is used as a pigment dispersant for plastic. Pigment dispersant for chemical fiber masterbatches, such as ABS, PS, polypropylene, polyester masterbatches.
Ethylene bis(stearamide) can also be used as diffusion powder for plastic color matching.
Depending on the amount of pigment and filler added, the addition amount is 0.5~5%.

Powder Coating
Ethylene bis(stearamide) can be used as flow additives for powder coatings.

Paint, Ink
Adding 0.5~2% EBS can improve the effect of salt spray and moisture resistance in the manufacture of paint and lacquer; adding this product in the paint can improve the performance of the paint stripper and can improve the leveling of the baked enamel surface.
Ethylene bis(stearamide) can be used as a matting agent in furniture polishing agents and printing ink.
After micronization (particle size: d50 about 6μ, d 90 about 12μ), Ethylene bis(stearamide) has excellent anti-abrasion and smoothness and can be used in lacquer systems to improve polishability and degassing on a porous surface.

Other uses of Ethylene bis(stearamide):
Melting point rising agent for petroleum products; lubricant and anti-corrosion agent for metal drawing; potting material for electrical components; defoaming agent and paper coating ingredient for paper industry; used as a defoaming agent and permanent water pulling agent for dyeing works in textile dyeing and finishing; adding this product in asphalt can reduce the viscosity of asphalt and improve the softening point, water-resistance and weather resistance of asphalt.

Ethylene bis(stearamide) is a synthetic wax that has fatty amide groups that can interact with the surface of a variety of nanoparticles.
Ethylene bis(stearamide) can be used for a wide range of applications such as lubricants, activators and dispersing agents that reduce the friction in the system and increase the rate of processing.
Ethylene bis(stearamide) can be used to improve the dispersion of halloysite nanotube into a polylactic acid matrix, which can be potentially used as biodegradable plastic.

Ethylene bis(stearamide) may also be used as a lubricant to improve the strength of high density polyethylene (HDPE)/wood composites.
Processing lubricants, release agents, antistats, pigment dispersing aids, oil-based antifoaming agent and additive to coatings.

The primary use for ethylene bis(stearamide) is as a release agent for PVC (poly-vinyl chloride) extrusion.
Ethylene bis(stearamide) acts as both an internal and external lubricant to enhance malleability of the PVC resin.
Ethylene bis(stearamide) will inherently lower the viscosity of the polymer resin and can decrease friction and abrasion of the polymer surface.

Ethylene bis(stearamide) is also a dispersal agent and helps contribute to color uniformity and stability of the resulting extruded PVC product.
Adding Ethylene bis(stearamide) to your thermoforming process will increase productivity by reducing shear stress.
The overall product has a high gloss finish, smooth surface and increased tensile strength.

Ethylene bis(stearamide) is not just for PVC thermoforming, it is suitable as an additive for nearly any thermoplastic manipulation with benefits similar to those described above for the PVC process.
Ethylene bis(stearamide) can be used with ABS, polystyrene, polyethylene, polypropylene and more.
In plastic masterbatch applications it reduces the amount of resin/binder necessary which translates to cost savings.
Ethylene bis(stearamide) will also help with pigment dispersal and give the finished product a more vibrant glossy finish.

Ethylene bis(stearamide) is a synthetic substance that has a smooth texture.
Ethylene bis(stearamide) is available in white beads that have no distinguishable scent.
This non-toxic substance is soluble in chlorinated and aromatic solvents.
In a general solvent under normal temperatures, Ethylene bis(stearamide) will dissolve.
Ethylene bis(stearamide) is used in products across many industries because of its high-temperature lubrication and low-temperature anti-stick and surface-smoothing properties.

Textiles and paper: Ethylene bis(stearamide) acts as an anti-static and anti-foaming agent in the production of various textiles and papers.

Rubber: In rubber production, Ethylene bis(stearamide) is a release agent and additive to surface finishing.
Plastic: In the processing of many kinds of plastics, Ethylene bis(stearamide) is an internal and external lubricant, pigment stabilizer and dispersant.
Ethylene bis(stearamide) also improves the surface appearance of most plastics, such as by adding a glossy finish on PVC.
The multiple functions of Ethylene bis(stearamide) in plastic production improve processing time and reduce processing costs.

Metalworking: In wire-drawing, Ethylene bis(stearamide) is a lubricant that reduces friction.

Construction: Ethylene bis(stearamide) is a modifier in the production of asphalt because Ethylene bis(stearamide) lowers the asphalt's softening temperature.

Painting and printing: Ethylene bis(stearamide) is an anti-sticking and leveling agent for printing ink and painting.
Ethylene bis(stearamide) can also be an additive in paint and a solvent in paint coating.

Ethylene bis(stearamide) is offered as a vegetable- or tallow-based grade.
The primary use for Ethylene bis(stearamide) is in the manufacture of plastics, where it has multiple functions.
Ethylene bis(stearamide) is also suitable for adhesives and sealants as an anti-block and slip agent.

Ethylene bis(stearamide) (C38H76N2O2) is an organic compound otherwise called EBS.
This compound is derived from the reaction of ethylenediamine and stearin.
Ethylene bis(stearamide) is a waxy white solid that is also found in powder or bead form.

Example of use of Ethylene bis(stearamide):
Ethylene bis(stearamide) is used in all types of industry, especially in the manufacture of plastics and paints, as a dispersing or lubricating agent to facilitate and stabilize the dispersion of materials in mixtures, to reduce friction and abrasion of the surface of polymers, or to contribute to color stability.

Ethylene bis(stearamide) is also used in processing industries, for example in the paper industry and the powder metallurgy sector, as a release agent, as an antistatic agent and an anti-foam agent for the production of thermoplastics , cables and paper.
ADC is a supplier of ethylene bis stearamide.

Ethylenebisstearamide is an amide wax.
It is used in various industries as internal/external lubricant, mold release agent, dispersant and slip- and anti-blocking-agent.
Because of its excellent lubricating properties, it is widely used internally and/or externally in most plastics such as ABS, PS, PP, etc.

Used as additive Ethylenebisstearamide can be incorporated directly into polymers to prevent any unwanted adhesion.
Adhesive pellets or film often develop adhesion between the polymer pellets or layers when exposed to elevated temperatures and pressures.
EBS is used to prevent adhesive granulate from sticking together during storage, or to prevent adhesive film layers to attract dirt or stick together before application by reactivation or melting.

Ethylenebisstearamide can also be used as a process aid, for example to improve dispersion of fillers.
Ethylenebisstearamide can also be a binder in the precise engineering metal part.
Due to its good dispersing ability and surface migration EBS can be used in printing inks.
Another field of application is the bitumen industry: When used in asphalt binder for road making (asphalt modifiers), Ethylene bis(stearamide) increases its softening point and enhances its visco-elasticity.

Ethylene bis(stearamide) is an organic compound with the formula (CH2NHC(O)C17H35)2.
Ethylene bis(stearamide) is a waxy white solid and is also found as powder or beads that is widely used as a form release agent.
The compound is derived from the reaction of ethylenediamine and stearic acid.
Ethylene bis(stearamide) is a white solid of low toxicity that provides a slippery coating for a variety of applications.

Ethylene bis(stearamide) is almost applicable to all the thermoset plastics and thermoplastics, with good adhesion resistant and antistatic performance.
Ethylene bis(stearamide) improves dispersibility of plastics and fillers.
Ethylene bis(stearamide) can improve the melting fluidity of resins,efficiency and glossiness of products when it is used in the processing of the plastic.

Ethylene Bis Stearamide is a hard and brittle white high melting point wax.
Its industrial products are slightly yellow particles, non-toxic, no side effects to the human body, insoluble in most solvents at room temperature , Stable to acid and alkali and aqueous media, soluble in hot chlorinated hydrocarbons and aromatic hydrocarbon solvents, its powdery substance has a strong slippery feeling, and it is a compound that is wettable to water above 80 ℃.

Ethylene bis(stearamide) is an excellent plastics processing auxiliary which is suitable for almost all thermosetting and thermoplastic plastics.
Ethylene bis(stearamide) has good lubricant property and good anti-adhesive,anti-static properties and can improve remarkably the dispersion of the plastics and fillers.
So Ethylene bis(stearamide) is widely used as lubricant,demoulding agent,slippery opening agent and plastic dispersing agent.
Addition in plastics processing can improve the melting flowability, raise the working efficiency and retrieve the insufficiency of the fineness of the moulds to make the processed products smooth with luster as well as uniform and bright in color.

Ethylene bis(stearamide) is used as lubricant with good inner or outer lubricant action and has good coordination when used together with other lubricants as high grade alcohols,aliphatic acid esters,calcium stearate and paraffin.
In the processing of ABS,AS,hard PVC, polyformaldehyde, polycarbonate, polyurethane and phenolformaldehyde resins, it is used as lubricant demoulding agent with a quantity of 0.5~1.5 %.
Ethylene bis(stearamide) can be used as nucleation transparency agent to reduce the nucleating time in compounds such as polyolefins,polyformaldehyde and polyamide, promote the structure of resin to become fine, thus improve the mechanical property and transparency of the products.

Ethylene bis(stearamide) can also be used as processing auxiliary of rubber.
Besides the lubricant demoulding property and modifying performance of filler surface,it can raise the surface fineness of rubber pipes and rubber plates to act as rubber surface polishing agent.
Ethylene bis(stearamide) improves the kneading, processing and vulcanization performance of rubber grains in the processing of flouro-rubber.

Ethylene bis(stearamide) can be added in the coating production to increase the uniform dispersion of pigment and filler,inprove the surface leveling property of baking paint,prevent the stripping off of paint filmand improve water-proof and acid-resistant and alkaliresistant property.
In nitrocellulose lacquers, Ethylene bis(stearamide) can bring about the flatting action.

In synthetic fiber industry,Ethylene bis(stearamide) can improve the heat-resistant, weather-resistant property of polyester and polyamide and bring about certain antistatic effects.
Ethylene bis(stearamide) is used in the spinning of antistatic nylon fiber as additive and also is able to reduce the breaking of yarn.
Ethylene bis(stearamide) has excellent colour and colour stability and special property showing the low viscosity in molten form under high temperature.

Compatibility: Ethylene bis(stearamide) is compatible with most waxes and plasticizers.
The polarity of its two central amide group and the non-polarity of the two fatty chains make this product an excellent surface-active agent which in incompatible with virtually all solvents and most polymer systems.
When incorporated into polymers Ethylene bis(stearamide) will “bloom” to the surface, coating it with a monomolecular layer.
Ethylene bis(stearamide)'s incompatibility is the basis for several other properties and many of the products commercial applications.

Lubricity: Ethylene bis(stearamide) fatty chain imparts excellent slip properties to surfaces upon which it collects.
Because of this, Ethylene bis(stearamide) is a good blending agent.
Corrosion Resistance: A coating of Ethylene bis(stearamide) will improve surface’s resistance to salt, heat, moisture and most solvents.

Antistatic Properties: Ethylene bis(stearamide) will lower static charge generation in plastic film by reducing friction at the surface.
Electrical Properties: Ethylene bis(stearamide) can be used in many electrical applications without detracting from the electrical properties of the resins into which Ethylene bis(stearamide) is incorporated.

Ethylene bis(stearamide) is an amide product from natural oils.
EBS has many applications in many fields: cosmetics, paints, plastic industry, chalkboards.
Particularly in the plastic industry, EBS has many applications such as lubricants, mold release agents, dispersants, stabilizers. styrofoam, etc.

Ethylene bis(stearamide) is a compound composed of a long flexible hydrocarbon chain combined with a polar amide radical, creating a multipolar molecular structure.
When used in plastics, EBS is compatible with both non-polar resins and those containing polar groups.
Due to the flexibility of the EBS circuit, they tend to move to the outside of the plastic flow, thereby creating a lot of surface features for the product: glossy, smooth, and sticky, etc.

Uses of Ethylene bis(stearamide):
Ethylene bis(stearamide) reduces flow friction, improves productivity, and reduces equipment wear.
Ethylene bis(stearamide) improves the gloss of the product, reducing the line marks off the plastic.
Ethylene bis(stearamide) helps to prevent surface adhesion, helping to separate the product from the mold in injection molding.
Ethylene bis(stearamide) has the ability to support dispersion for many ingredients, such as color, filler, ... into plastic.
Ethylene bis(stearamide) stabilizes the foam structure in EVA, PE, PS foam production technology...

Other names:
110-30-5
N,N'-Ethylenebis(stearamide)
Plastflow
Ethylene distearamide
Advawax
N,N'-(Ethane-1,2-diyl)distearamide
Lubrol EA
Microtomic 280
Abril wax 10DS
Nopcowax 22-DS
Carlisle Wax 280
Acrowax C
Acrawax CT
Armowax ebs-P
Ethylenebis(stearamide)
Ethylenedistearamide
Advawachs 280
Chemetron 100
Octadecanamide, N,N'-1,2-ethanediylbis-
Ethylenebis(stearylamide)
Carlisle 280
Ethylenebisstearoamide
Advawax 275
Advawax 280
1,2-Bis(octadecanamido)ethane
N,N'-ETHYLENE DISTEARYLAMIDE
Acrawax C
N,N'-Distearoylethylenediamine
N,N'-Ethylenebisoctadecanamide
Kemamide W 40
N,N'-Ethylenedistearamide
Ethylenediamine steardiamide
Ethylenediamine bisstearamide
WAX C
Stearic acid, ethylenediamine diamide
Ethylenebisstearamide
N,N'-Ethylenebisstearamide
Octadecanamide, N,N'-ethylenebis-
NN'-Ethylenebis(stearamide)Ethylenebisoctadecanamide
N,N'-Ethylene bisstearamide
N-[2-(octadecanoylamino)ethyl]octadecanamide
N,N'-1,2-Ethanediylbisoctadecanamide
N,N-Ethylenebis(stearamide)
603RP8TB9A
NSC-83613
N,N'-ethane-1,2-diyldioctadecanamide
N,N'-Ethylenedi(stearamide)
Ethylene bis stearamide
N,N-Ethylenebisstearamide
CCRIS 2293
ethylene bisstearamide
HSDB 5398
Ethylene bis(stearamide)
EINECS 203-755-6
NSC 83613
UNII-603RP8TB9A
AI3-08515
N,N'-ethylene-bis-stearic amide
Abluwax EBS
Armowax EBS
Dorset WAX
N,N'-ethylenebis
Glycowax 765
Kemamide W-39
Kemamide W-40
LIPOWAX C
Uniwax 1760
EC 203-755-6
SCHEMBL19975
DTXSID4026840
N,N'-ETHYLENEDISTEARYLAMIDE
BIS(STEAROYL)ETHYLENEDIAMIDE
NSC83613
1,2-ETHYLENEBIS(STEARAMIDE)
MFCD00059224
ZINC85733714
AKOS015915120
ETHYLENEDIAMINE BIS(STEARAMIDE)
Octadecanamide,N'-1,2-ethanediylbis-
DS-6811
E0243
FT-0629590
D70357
A802179
Q5404472
W-108690