PRODUCTS

ETHYLENE DISTEARAMIDE

ETHYLENE DISTEARAMIDE = N,N'-ETHYLENEBIS(STEARAMIDE) = ETHYLENE BIS STEARAMIDE (EBS)

CAS Number: 110-30-5
EC Number: 203-755-6
MDL number: MFCD00059224
Molecular Formula: C38H76N2O2

Ethylene distearamide is a hard and brittle white high melting point wax.
Ethylene distearamide's industrial products are slightly yellow particles or white powder, non-toxic, and have no side effects on the human body.

Ethylene distearamide is a synthetic wax that has fatty amide groups that can interact with the surface of a variety of nanoparticles.
The Plastflow molecule contains a total of 118 atom(s).

There are 76 Hydrogen atom(s), 38 Carbon atom(s), 2 Nitrogen atom(s) and 2 Oxygen atom(s).
A chemical formula of Plastflow can therefore be written as: C38H76N2O2
Ethylene distearamide is a bis-amide polymer additive that lowers the temperature at which the asphalt softens.

Ethylene distearamide is a flammable white to yellowish solid that is practically insoluble in water.
Ethylene distearamide decomposes when heated above 200°C.

USES and APPLICATIONS of ETHYLENE DISTEARAMIDE:
-Cosmetic Uses: viscosity controlling agents
-Used Cleaning Products, Industrial and Automotive Chemicals, Polishes and Floor Maintenance Products, Emulsifier, Water Treatment, Textiles, Adhesives, Plastics , Dispersant, Raw Material, Lubricant, Imparts a Smooth Gloss, and Rubber.

-Ethylene distearamide is used in various industries as internal/external lubricant, mold release agent, dispersant and slip- and anti-blocking-agent.

-Because of its excellent lubricating properties Ethylene distearamide is widely used internally and/or externally in most plastics such as ABS, PS, PP etc.
-Used as additive Ethylene distearamide can be incorporated directly into polymers to prevent any unwanted adhesion.

-Adhesive pellets or film often develop adhesion between the polymer pellets or layers when exposed to elevated temperatures and pressures.

-Ethylene distearamide is used to prevent adhesive granulate from sticking together during storage, or to prevent adhesive film layers to attract dirt or stick together before application by reactivation or melting.

-Ethylene distearamide uses and applications include:
Lubricant, processing aid for PVC, PS, ABS, nylon; mold release agent for plastics; peptizing agent and dispersant for technical NR articles; paint raw material; defoamer for pulppaper, water treatment, plastics processing, textiles; viscous control agent; lubricant, slip, antiblock, and mold release agent for plastics, crayons, petrol products, asphalts, inks, metals, textiles; antitackifier, antiblocking agent, antistat in vinyls, PS, polyethylene, ABS; surfactant-finishing agent; release agent in food-contact coatings; in food packaging adhesives; in paperpaperboard in contact with aqueousfatty foods; in cellophane for food packaging.

-Ethylene distearamide's Lubrication performance is excellent, anti-calcium salt ability is strong, drag reduction effect is good, used for drilling in saturated brine to reduce power consumption.
-Ethylene distearamide is used as processing aid for resins and polymers and as defoaming agent.

-Ethylene distearamide can also be used as a process aid, for example to improve dispersion of fillers.
-Ethylene distearamide is traditionally used as lubricant and binder for cold compaction of powdered metal parts.

-Ethylene distearamide is a bis-amide polymer additive that lowers the temperature at which the asphalt softens.
-Ethylene distearamide is used as processing aid for resins and polymers and as defoaming agent.

-Ethylene distearamide atomized is traditionally used as lubricant and binder for cold compaction of powdered metal parts.
-Ethylene distearamide prilled is an effective lubricant, processing aid, slip additive and pigment dispersant aid for most polymers.

-Ethylene distearamide is an ethylenebisstearamide, specifically developed to afford low, consistent viscosities and superior cost performance in paper pulp defoamer applications.
-Useful as defoamer for paper making and textile processing .

-Ethylene distearamide is used in process industries as release agent, antistatic agent and antifoaming agent for the production of thermoplastics, wiring, and paper.
-In cosmetic products Ethylene distearamide is used as a viscosity control agent.

-Used Flow Enhancer in Powder Coating Additives, Metal Working Fluids, and Friction Reducing Lubricant in Wire-Drawing.
-Ethylene distearamide can be used for a wide range of applications such as lubricants, activators and dispersing agents that reduce the friction in the system and increase the rate of processing.

-Finish to Rigid PVC;
Improves the General Surface Appearance of Most Plastics.
The Multiple Functions of Ethylene distearamide in Plastics Production Improve Processing Time and Reduce Processing Costs.

-Used Release Agent and Additive to the Surface Finishing in the Production of Rubber.
-Textiles and Paper:
Anti-Static Agent and Anti-Foaming Agent in Paper and Textile

-Ethylene distearamide acts as a dispersing agent or internal/external lubricant in plastic applications to facilitate and stabilize the dispersion of solid compounding materials to enhance processability, to decrease friction and abrasion of the polymer surface, and to contribute color stability and polymer degradation.

-Ethylene distearamide also finds use in adhesives and powder metallurgy.
-Other Industrial Uses:
Modifier Used in Asphalt Production to Lower the Temperature at

-Ethylene distearamide is used for slip agent , release agent , antistatic agent , pigment dispersing aid , oil-based antifoam agent and additive for coatings.

-Internal and External Lubricant, Pigment Stabilizer and Dispersant in the Processing of all Types of Plastics.
-Ethylene distearamide is synthetic wax that is widely used as a release agent, antistatic agent, and antifoaming agent.

PHYSICAL and CHEMICAL PROPERTIES of ETHYLENE DISTEARAMIDE:
Molecular Weight: 593.0
XLogP3-AA: 15.7
Hydrogen Bond Donor Count: 2
Hydrogen Bond Acceptor Count: 2
Rotatable Bond Count: 35
Exact Mass: 592.59067967
Monoisotopic Mass: 592.59067967
Topological Polar Surface Area: 58.2 Å²
Heavy Atom Count: 42

Formal Charge: 0
Complexity: 503
Isotope Atom Count: 0
Defined Atom Stereocenter Count: 0
Undefined Atom Stereocenter Count: 0
Defined Bond Stereocenter Count: 0
Undefined Bond Stereocenter Count: 0
Covalently-Bonded Unit Count: 1
Compound Is Canonicalized: Yes

Melting point: 144-146 °C(lit.)
Boiling point: 646.41°C (rough estimate)
Density: 1 g/cm3 (20℃)
vapor pressure: 0.000023 Pa (20 °C)
refractive index: 1.4670 (estimate)
Flash point: 280℃
storage temp.: 2-8°C
solubility: ketones, alcohols and aromatic solvents at their boiling points: soluble
pka: 15.53±0.46(Predicted)
form: beads

Physical state: Beads
Color: white
Odor: odorless
Melting point/freezing point:
Melting point/range: 144 - 146 °C - lit.
Initial boiling point and boiling range: 260 °C at 1.013 hPa
Flammability (solid, gas): No data available
Upper/lower flammability or explosive limits: No data available
Flash point: ca.270 °C - DIN 51758
Autoignition temperature: ca.380 °C at 1.013 hPa - DIN 51794
Decomposition temperature: > 200 °C -
pH: No data available

Viscosity
Viscosity, kinematic: No data available
Viscosity, dynamic: ca.10 mPa.s at 150 °C
Water solubility at 20 °C: insoluble
Partition coefficient: n-octanol/water
log Pow: 13,98 at 25 °C - Potential bioaccumulation
Vapor pressure: Not applicable
Density: 1 g/cm3 at 20 °C
Relative density: No data available

Relative vapor density: No data available
Particle characteristics: No data available
Explosive properties: No data available
Oxidizing properties: none
Other safety information: No data available
Assay: 95.00 to 100.00
Food Chemicals Codex Listed: No
Boiling Point: 720.34 °C. @ 760.00 mm Hg (est)

Flash Point: 213.00 °F. TCC ( 100.70 °C. ) (est)
logP (o/w): 14.787 (est)
Soluble in: water, 2.049e-010 mg/L @ 25 °C (est)
Physical Form (at 20°C): Solid
Melting Point: 144-146°C
Boiling Point: 260°C
Flash Point: 280°C
Density: 0.89
Long-Term Storage: Store long-term in a cool, dry place
Density: 0.9±0.1 g/cm3

Boiling Point: 720.3±43.0 °C at 760 mmHg
Melting Point: 144-146 °C(lit.)
Molecular Formula: C38H76N2O2
Molecular Weight: 593.022
Flash Point: 100.7±28.3 °C
Exact Mass: 592.590698
PSA: 58.20000
LogP: 14.99
Vapour Pressure: 0.0±2.3 mmHg at 25°C
Index of Refraction: 1.467
Water Solubility: ketones, alcohols and aromatic solvents at their boiling points: soluble

FIRST AID MEASURES of ETHYLENE DISTEARAMIDE:
-Description of first-aid measures:
*If inhaled:
After inhalation:
Fresh air.

*In case of skin contact:
Take off immediately all contaminated clothing.
Rinse skin with water/ shower.

*In case of eye contact:
After eye contact:
Rinse out with plenty of water.
Remove contact lenses.

*If swallowed:
After swallowing:
Make victim drink water (two glasses at most).
Consult doctor if feeling unwell.

-Indication of any immediate medical attention and special treatment needed:
No data available

ACCIDENTAL RELEASE MEASURES of ETHYLENE DISTEARAMIDE:
-Environmental precautions:
Do not let product enter drains.

-Methods and materials for containment and cleaning up:
Cover drains.
Collect, bind, and pump off spills.
Take up dry.
Dispose of properly.
Clean up affected area.

FIRE FIGHTING MEASURES of ETHYLENE DISTEARAMIDE:
-Extinguishing media:
*Suitable extinguishing media:
Water
Foam
Carbon dioxide (CO2)
Dry powder

*Unsuitable extinguishing media:
For this substance/mixture no limitations of extinguishing agents are given.

-Further information:
Prevent fire extinguishing water from contaminating surface water or the ground water system.

EXPOSURE CONTROLS/PERSONAL PROTECTION of ETHYLENE DISTEARAMIDE:
-Control parameters:
--Ingredients with workplace control parameters:
-Exposure controls:
--Personal protective equipment:

*Eye/face protection:
Use Safety glasses.

*Skin protection:
Full contact:
Material: Nitrile rubber
Minimum layer thickness: 0,11 mm
Break through time: 480 min

Splash contact:
Material: Nitrile rubber
Minimum layer thickness: 0,11 mm
Break through time: 480 min

-Control of environmental exposure
Do not let product enter drains.

HANDLING and STORAGE of ETHYLENE DISTEARAMIDE:
-Conditions for safe storage, including any incompatibilities:
*Storage conditions:
Tightly closed.
Dry.

STABILITY and REACTIVITY of ETHYLENE DISTEARAMIDE:
-Chemical stability:
The product is chemically stable under standard ambient conditions (room temperature).

-Incompatible materials:
No data available

SYNONYMS:
N,N'-Ethylenebis(stearamide)
Plastflow
Ethylene distearamide
N,N'-(Ethane-1,2-diyl)distearamide
Advawax
Acrowax C
Acrawax CT
Lubrol EA
Ethylenedistearamide
Microtomic 280
Advawachs 280
Ethylenebis(stearylamide)
Abril wax 10DS
Carlisle 280
Nopcowax 22-DS
Ethylenebisstearoamide
Advawax 275
Advawax 280
Carlisle Wax 280
Armowax ebs-P
Ethylenebis(stearamide)
Octadecanamide, N,N'-1,2-ethanediylbis-
N,N'-Ethylenebisoctadecanamide
1,2-Bis(octadecanamido)ethane
Chemetron 100
N,N'-ETHYLENE DISTEARYLAMIDE
N,N'-Ethylenedistearamide
Ethylenediamine steardiamide
Ethylenediamine bisstearamide
N,N'-Distearoylethylenediamine
Ethylenebisstearamide
N,N'-Ethylenebisstearamide
NN'-Ethylenebis(stearamide)
Stearic acid, ethylenediamine diamide
Ethylenebisoctadecanamide
Octadecanamide, N,N'-ethylenebis-
UNII-603RP8TB9A
N-[2-(octadecanoylamino)ethyl]octadecanamide
N,N-Ethylenebis(stearamide)
603RP8TB9A
N,N'-ethane-1,2-diyldioctadecanamide
Acrawax C
Kemamide W 40
N,N'-Ethylenedi(stearamide)
WAX C
N,N-Ethylenebisstearamide
CCRIS 2293
ethylene bisstearamide
HSDB 5398
Ethylene bis stearamide
Ethylene bis(stearamide)
NSC 83613
N,N'-Ethylene bisstearamide
AI3-08515
N,N'-ethylene-bis-stearic amide
Abluwax EBS
Armowax EBS
Dorset WAX
C38H76N2O2
N,N'-ethylenebis
Glycowax 765
Kemamide W-39
Kemamide W-40
N,N'-1,2-Ethanediylbisoctadecanamide
Uniwax 1760
Ethylene Bis Stearamide SF
SCHEMBL19975
Octadecanamide,N'-ethylenebis-
DTXSID4026840
NSC83613
MFCD00059224
NSC-83613
ZINC85733714
AKOS015915120
Octadecanamide,N'-1,2-ethanediylbis-
DS-6811
E0243
FT-0629590
V0595
D70357
N,N'-Ethylenebis(stearamide), beads, <840 mum
A802179
Q5404472
W-108690
2,5-dihexadecylhexanediamide;N,N'-(Ethane-1,2-diyl)distearamide
n,n'-ethylenebisoctadecanamide (mixture of fatty acid amides) (consists of c14, c16 and c18)
Ethylene distearamide;1,2-Bis (octadecanamido) ethane
1,2-Bis (stearoylamino) ethane
N,N-Bis-stearoylethylenediamide
N,N-Distearoylethylenediamine
N,N-1,2-Ethanediylbisoctadecanamide Ethylene bis (stearamide)
N,N-Ethylene bisstearamide
Ethylenebisstearoamide
Ethylenebis (stearylamide)
Ethylenediamine bisstearamide Ethylenediamine steardiamide
N,N-Ethylenedistearamide
N,N-Ethylene distearylamide
Octadecanamide, N,N-1,2-ethanediylbis-
Octadecanamide, N,N-ethylenebis- Stearic acid, ethylenediamine diamide
1,2-BIS(OCTADECANAMIDO)ETHANE
1,2- ETHYLENEBIS(STEARAMIDE) ABRIL
WAX 10DS
ACRAWAX C
ADVAWAX
ARMOWAX EBS-P
BIS(STEAROYL)ETHYLENEDIAMIDE CARLISLE
WAX 280
CHEMETRON 100
ETHYLENE BIS
STEARAMIDE ETHYLENE
DISTEARAMIDE
ETHYLENEBIS(STEARIC ACID AMIDE) ETHYLENEDIAMINE
BIS(STEARAMIDE)
KEMAMIDE W 40
LIPOWAX C
LUBROL EA
MICROTOMIC 280
N,N'-1,2-ETHANEDIYLBISOCTADECANAMIDE
N,N'-BIS(OCTADECANOYL)ETHYLENEDIAMINE
N,N'-DISTEAROYLETHYLENEDIAMINE
N,N '-ETHYLENE BISSEARAMIDE
N,N'-ETHYLENE DISTEARYLAMIDE
N,N'-ETHYLENE DISTEARYLAMIDE [HSDB]
N,N'-ETHYLENEBIS(STEARAMIDE)
N,N'-ETHYLENEBIS(STEARIC AMIDE)
N,N'-ETHYLENEDISTEARYLAMIDE NOPCOWAX 22-DS
NSC-83613
OCTADECANAMIDE, N,N'-1,2-ETHANEDIYLBIS-
OCTADECANAMIDE, N,N'-
ETHYLENEBIS- PLASTFLOW
STEARIC ACID, ETHYLENEDIAMINE DIAMIDE
WAX C