Quick Search

PRODUCTS

EXXSOL D30

CAS:    64742-48-9
EINECS:    265-150-3

Description
Exxsol D30, synthesis grade, also called White Spirit Type 3 (EINECS number: 265-150-3; CAS number:64742-48-9) or hydrotreated heavy naphtha (petroleum), is a complex combination of hydrocarbons obtained by treating a petroleum fraction with hydrogen in the presence of a catalyst. 
Exxsol D30 consists of hydrocarbons having carbon numbers predominantly in the 6-13 range and boiling in the range of approximately 65 to 230°C (149 to 446°F).
Exxsol D30 is a clear and transparent liquid replacing traditional solvents such as mineral or white spirits. 
Exxsol D30 maintains good solvency and low to extremely low aromatic content (typically less than 1%) to minimize risks from exposure. 
Exxsol D30 has low odor, low levels of toxicity, broad evaporation range and narrow boiling range. 
Exxsol D30 has applications in silicone sealant formulations.
Exxsol D30 by ExxonMobil acts as a solvent and mold release agent. 
Exxsol D30 is a low odor dearomatized hydrocarbon fluid. 
Exxsol D30 is used in coating applications.
Exxsol D30 grade solvents are suitable for a broad spectrum of classical lab applications, and are frequently used in regulated and highly demanding lab applications. 
Exxsol D30 provides worldwide best and most extensive product specifications. 

Exxsol D30 is an intermediate hydrocarbon liquid stream derived from the refining of crude oil with CAS-no 64742-48-9.
Exxsol D30 is most usually desulfurized and then catalytically reformed, which rearranges or restructures the hydrocarbon molecules in the naphtha as well as breaking some of the molecules into smaller molecules to produce a high-octane component of gasoline (or petrol).

There are hundreds of different petroleum crude oil sources worldwide and each crude oil has Exxsol D30's own unique composition or assay. 
There are also hundreds of petroleum refineries worldwide and each of them is designed to process either a specific crude oil or specific types of crude oils. 
Exxsol D30 is a general term as each refinery produces its own naphthas with their own unique initial and final boiling points and other physical and compositional characteristics.
Exxsol D30 may also be produced from other material such as coal tar, shale deposits, tar sands, and the destructive distillation of wood.

Application    
Exxsol D30 is used in the following products: fuels, air care products, anti-freeze products, coating products, lubricants and greases, washing & cleaning products and welding & soldering products.
The advantage of using Exxsol D30 is less intense odour compared to white spirit with aromatic content whereas Exxsol D30 is difficult to discriminate between the toxicological properties of White Spirit Type 3 (no aromatics) and white spirit with aromatic content.
Exxsol D30 is used in the following products: fuels, air care products, anti-freeze products, coating products, lubricants and greases, washing & cleaning products and welding & soldering products.
Other release to the environment of Exxsol D30 is likely to occur from: indoor use in close systems with minimal release (e.g. cooling liquids in refrigerators, oil-based electric heaters), outdoor use in close systems with minimal release (e.g. hydraulic liquids in automotive suspension, lubricants in motor oil and break fluids), indoor use as processing aid and outdoor use as processing aid.
Exxsol D30 is used in the following products: fuels.
Exxsol D30 is used for the manufacture of: machinery and vehicles and chemicals.
Other release to the environment of Exxsol D30 is likely to occur from: indoor use as processing aid, outdoor use as processing aid, indoor use in close systems with minimal release (e.g. cooling liquids in refrigerators, oil-based electric heaters) and outdoor use in close systems with minimal release (e.g. hydraulic liquids in automotive suspension, lubricants in motor oil and break fluids).

Exxsol D30 also produce small amounts of specialty naphthas for use as solvents, cleaning fluids and dry-cleaning agents, paint and varnish diluents, asphalt diluents, rubber industry solvents, recycling products, and cigarette-lighter, portable-camping-stove and lantern fuels. 
Exxsol D30 is subjected to various purification processes which adjusts chemical characteristics to suit specific needs.

Exxsol D30 comes in many varieties and each are referred to by separate names such as petroleum ether, petroleum spirits, mineral spirits, paraffin, benzine, hexane, ligroin, white oil or white gas, painters naphtha, refined solvent naphtha and Varnish makers' & painters' naphtha (VM&P). 
The best way to determine the boiling point and other compositional characteristics of any of the specialty Exxsol D30 is to read the Safety Data Sheet (SDS) for the specific naphtha of interest. 
Safety Data Sheets can be found on a chemical suppliers websites or by contacting the supplier directly.

On a much larger scale, Exxsol D30 is also used in the petrochemicals industry as feedstock to steam reformers and steam crackers for the production of hydrogen (which may be and is converted into ammonia for fertilizers), ethylene, and other olefins. 
Natural gas is also used as feedstock to steam reformers and steam crackers.

Exxsol D30 Chemical Properties
Melting point: 0 ºC
Boiling point: 150-200 °C
Density: 0.78 g/mL at 20 °C
Vapor pressure: 0.75 hPa (20 °C)
Fp: 62°C
Storage temp.: Store at +2°C to +25°C.
Solubility: <0.001g/l insoluble
Explosive limit: 6-7%(V)
Stability: Stable. Combustible. Incompatible with strong oxidizing agents.
EPA Substance Registry System: Exxsol D30 (64742-48-9)

Synonyms
Hydrotreated heavy naphtha (petroleum)
Hydrotreated light steam cracked naphtha residuum (petroleum)
Naphtha, petroleum, hydrotreated heavy
Naphtha, (petroleum), hydrotreated heavy 
Low boiling point hydrogen treated naphtha 
Catalytic Reformer Feed 
CLERANE 230 
CLERANE 260
DESULPHURISED NAPHTHA
DSP 100/120 feed
Exsol d 140/170 - Exsol 30 
Exxsol 100/140 feed 
Exxsol D180/200 - Actrel 1156D 
Exxsol D30
Exxsol D30 feed 
Exxsol D40 
Exxsol D40 - Exxsol D40WO - Flotation solvent 
Exxsol D60 
Exxsol D60 - Petro 60 
Exxsol DHN50 
Exxsol DSP 145/160
Heptane feed
HF-HVN
HVN
HYDROTREATED HEAVY NAPHTHA 
ISANE IP 155 
ISANE IP 165 
ISANE IP175 
ISANE IP 185 
ISANE HB 
LBF diisopentanise 
LIAV 110 
LIAV 200 
Mineral Spirits, Isoparaffin hydrocarbon 
Naphtha hydrotraite a point d ebullition bas 
NAPHTHA 
Nappar 10 - Actrel 2240L 
Nappar 11 - Actrel 2256L - EFN 200/225 
Nappar 9 - Acteel 2221L 
Platformer Feed 
Powerformer Feed 
Reformer feed 
Refoermerfeed 
SPIRDANE BT 
SPIRDANE D 30 
SPIRDANE D 40 
SPIRDANE D 60 
SPIRDANE D 60 L 
SPIRDANE K 1 
SPIRDANE L 1 
SPIRDANE L 30 
Sweet powerformer feed 
Synthetic isoparaffinic hydrocarbon solvent
Treated Naphtha
Spirdane D 30
Sabinate
Spirdane D 60 
UN3295

  • Share !
E-NEWSLETTER