Synonyms:
Foral AX E; Foral AX E; Foral; Foral 105-E; Foral 105-E CG; Foral 85-E; Foral 85-E CG; fully hydrogenated rosin; rosin; Hydrogenated rosin; reçine; Tam Hidrojenlenmiş Reçine
Foral AX E is an alcohol soluble, fully hydrogenated rosin used as a tackifier. Offers good resistance to oxidation, medium softening point and very light color. Used in assembly, bookbinding, caulks, sealants, contact adhesives, case & carton sealing closings and hot-melt adhesives.
Synonyms:
Foral AX E; Foral AX E; Foral; Foral 105-E; Foral 105-E CG; Foral 85-E; Foral 85-E CG; fully hydrogenated rosin; rosin; Hydrogenated rosin; reçine; Tam Hidrojenlenmiş Reçine
Foral AX E
Foral AX E
Technical Datasheet
Foral AX E is an alcohol soluble, fully hydrogenated rosin used as a tackifier. Offers good resistance to oxidation, medium softening point and very light color. Used in assembly, bookbinding, caulks, sealants, contact adhesives, case & carton sealing closings and hot-melt adhesives. Compatible with natural and synthetic waxes, resins, rubber, drying and non-drying alkyds, blow castor oil, ethylcellulose, synthetic elastomers, thermoplastic polymers and copolymers. Foral AX E is also suitable for laminating, non-wovens, non food contact packaging, pressure sensitive adhesives, solvent-borne adhesives, tapes, labels and water-borne adhesives.
Product Type Tackifiers > Rosins > Hydrogenated Rosins
Chemical Composition Fully hydrogenated rosin
Product Status COMMERCIAL
Foral AX E - Fully Hydrogenated Rosin
Product description
Foral AX E fully hydrogenated rosin is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree. It is the palest, most highly stabilized rosin commercially available. Compared with Staybelite™ resin-E partially hydrogenated rosin, a hydrogenated rosin long established and widely used for its pale color and high oxidation resistance, Foral AX E has better initial color and color retention, and even greater resistance to oxidation.
It is especially indicated as the tackifier and resin modifier in solvent adhesives and hot-melt applied coatings and adhesives that must excel in these properties. It is also used in UV cured acrylics to improve adhesion to low surface energy substrates.
Applications/uses
Adhesives/sealants-B&C
Bookbinding
Caps & lids non-food contact
Carpet construction
Case and carton closures
Commerical printing inks
Film modification
Hygiene adhesives
Labels non food contact
Packaging tape
Polymer modification
Protective coatings
Road markings
Roofing ingredients
Solder flux
Solvent borne packaging adhesives
Specialty tape
Wire/cable
Key attributes
Alcohol-soluble
Compatible with UV acrylic adhesives
Excellent resistance to oxidation
High acid number
Improved adhesion to low surface energy substrates
Medium softening point
Thermoplastic hydrogenated resin
Very light color
Foral 85-E CG - Hydrogenated Rosinate
Foral™ 85-E CG hydrogenated rosinate is a cosmetic grade resin derived from the esterification of a highly stabilized gum rosin and glycerol. This light amber, thermoplastic resin has excellent resistance to oxidation and discoloration caused by heat and aging.
Foral 85-E - Ester of Hydrogenated Rosin
Foral™ 85-E ester of hydrogenated rosin is a very pale, thermoplastic ester resin derived from glycerol and a highly stabilized rosin that has outstanding resistance to oxidation, and to discoloration caused by heat and aging.
Foral 105-E CG - Hydrogenated Rosinate
Foral™ 105-E CG hydrogenated rosinate is a cosmetic grade resin derived from the esterification of a highly stabilized gum rosin and pentaerythritol. This thermoplastic resin has excellent resistance to oxidation and discoloration caused by heat and aging.
Foral 105-E - Ester of Hydrogenated Rosin
Foral™ 105-E ester of hydrogenated rosin is a pale, thermoplastic ester resin derived from pentaerythritol and a highly stabilized rosin.
Foral AX E - Fully Hydrogenated Rosin
Foral™ AX-E fully hydrogenated rosin is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree. It is the palest, most highly stabilized rosin commercially available.
Foral AX-E
Technical Datasheet
Fully hydrogenated rosin. Possesses excellent resistance to oxidation and medium softening point. Has better initial color and color retention.
Product Type Alkyd Resins > Modified > Rosins
Chemical Composition Fully hydrogenated rosin
CAS Number 65997-06-0
Foral AX E is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree. It is most highly stabilized rosin.
Hydrogenated resin
Foral AX
Foral AX rosin is a thermoplastic, acidic resin produced by hydrogenating wood rosin to an exceptionally high degree.
Key properties
It is the palest, most highly stabilized rosin commercially available.
Compared with Staybelite resin, a hydrogenated rosin long established and widely used for its pale color and high oxidation stability, Foral AX resin has better initial color and color retention, and even greater resistance to oxidation.
Applications
Foral AX resin is especially indicated as the tackifier and resin modifier in solvent adhesives and hot melt applied coatings and adhesives that must excel in these properties.
Foral AX resin is particularly suited to food contact applications.
Tackifier or modifier for the following adhesive systems: hot melt/pressure-sensitive/solvent-based/emulsion-based/sealants
Modifier in solvent-based or heat-sealable coatings
Component of thermoplastic compounds and hot melt depilatory waxes
Plastifier/modifier of natural and synthetic rubber goods
Foral AX
Foral AX rosin is a thermoplastic, acidic resin produced by hydrogenating wood rosin to an exceptionally high degree. It is the palest, most highly stabilized rosin commercially available. Compared with Staybelite resin, a hydrogenated rosin long established and widely used for its pale color and high oxidation stability, Foral AX resin has better initial color and color retention, and even greater resistance to oxidation. It is especially indicated as the tackifier and resin modifier in solvent adhesives and hot melt applied coatings and adhesives that must excel in these properties. Foral AX resin is particularly suited to food contact applications.
Applications
Tackifier or modifier for adhesive systems, including:
- Hot melt
- Pressure sensitive
- Solvent
- Emulsion
- Sealant compounds
Modifier in solvent-based or heat-sealable coatings
Component of thermoplastic compounds and hot melt depilatory waxes
Plasticizer/modifier of natural and synthetic rubber goods
Benefits
Highest degree of hydrogenation available
Exceptional color
Excellent heat stability and color retention
Good acid functionality
Low odor
Widely compatible with polymers and solvents
Broad regulatory approval
General Sales Specifications
Softening Point, Ring & Ball, °C minimum 66
Color, USRG rosin scale, maximum XB
Acid Number, mg KOH/g, minimum 158
Abietic acid, UV, %, maximum 0.2
Refractive index at 100 °C, maximum 1.4970