Quick Search

PRODUCTS

GMA (GLYCIDYL METHACRYLATE)


CAS NO:106-91-2
EC NO:203-441-9

GMA (Glycidyl Methacrylate) is an ester of methacrylic acid and glycidol. Containing both an epoxide and an acrylate groups, the molecule is bifunctional. GMA (Glycidyl Methacrylate) is a common monomer used in the production of epoxy resins. While typical home epoxies contain diglycidyl ether of bisphenol A (DGEBA), glycidyl methacrylate is instead used to provide epoxy functionalization to polyolefins and other acrylate resins. 
GMA (Glycidyl Methacrylate) is produced by several companies worldwide.
GMA (Glycidyl Methacrylate) is used to prepare a range of composites.

Properties:
Chemical formula:    C7H10O3
Molar mass:    142.1546 g/mol
Appearance:    colorless liquid
Density:    1.07 g/cm3
Boiling point:    189.0 °C (372.2 °F; 462.1 K)
Solubility in water:    ca 50g/l

GMA (Glycidyl Methacrylate) is an epoxy-functional monomer generally used to derivatize polymers. 
GMA (Glycidyl Methacrylate) can also undergo polymerization to form poly (glycidyl methacrylate).

GMA (Glycidyl Methacrylate) is an  is an epoxy-functional monomer/ acrylic monomer ester with the molecular formula C7H10O3, CAS 106-91-2.  
GMA (Glycidyl Methacrylate) has a sharp odour that may be troublesome. 

GMA (Glycidyl Methacrylate) is a common monomer used in the creation of epoxy resins. 
GMA (Glycidyl Methacrylate) is used to provide epoxy functionalization to polyolefins and other acrylate resins.

GMA (Glycidyl Methacrylate) is produced from methacrylic acid and glycidol. Glycidol contain both epoxide and alcohol functional groups.

Uses
GMA (Glycidyl Methacrylate) is used in the production of polymer coatings and finishes, adhesives, plastics and elastomers.

GMA (Glycidyl Methacrylate) can also undergo polymerization to form poly (glycidyl methacrylate).

Arpadis is one of the largest chemical distributor in Europe.

GMA (Glycidyl Methacrylate) is a colorless liquid with a fruity odor. Floats on water. 

GMA (Glycidyl Methacrylate) is an enoate ester obtained by formal condensation of the carboxy group of methacrylic acid with the hydroxy group of glycidol. 
GMA (Glycidyl Methacrylate) is an enoate ester and an epoxide. 
GMA (Glycidyl Methacrylate) derives from a methacrylic acid and a glycidol.

Industry Uses:
-Adhesives and sealant chemicals
-Intermediates
-producing resin for paint/coating and adhesive

Consumer Uses:
-Adhesives and sealants
-Paints and coatings

Industry Processing Sectors:
-Adhesive manufacturing
-All other basic organic chemical manufacturing
-Paint and coating manufacturing
-Plastic material and resin manufacturing

GMA (Glycidyl Methacrylate) is an ester of Methacrylic Acid and Glycidol. The characteristic of the property of Glycidyl Methacrylate (GMA) is its dual functionality – due to the methacrylic and epoxy groups. This gives it the possibility to combine the chemical properties of acrylates, reacting with styrene, by acrylates or by ethylene, and epoxies. The epoxy group of Glycidyl Methacrylate (GMA) is capable of different chemical transformations both in the monomer and in the polymers.

GMA (Glycidyl Methacrylate)  reacts with different substances (amines, phenols, ketones, carbonaceous acids, which contain halogen and others). 
GMA (Glycidyl Methacrylate) makes it possible to synthesize many new chemical connections. Small additives of Glycidyl Methacrylate (GMA) and its derivatives to different polymeric materials improve their mechanical, optical, adhesive characteristics, chemical, and atmospheric durability.

Product type: Methacrylate Monomer

Applications areas:
GMA (Glycidyl Methacrylate) is used for improving the quality and reaching the optimum performance properties of varnishes and paints, natural rubbers, latexes, sealing compounds, industrial protective coatings, synthetic fibers, paper, thermoplastics, structural and ion-exchange materials, used in polygraphy, automobile construction, radio engineering and microelectronics, biotechnology and in medicine.

GMA (Glycidyl Methacrylate) is applied in the production of:
-Coating resins
-Adhesives
-Textile finishes
-Ion exchange resins
-Modifications
-Electrification resists

Glycidyl methacrylate (GMA) is an ester of methacrylic acid and glycidol. It is a common monomer used in the production of epoxy resins. GMA is also a high purity, dual functionality monomer ideally suited for coating and resin applications. The Glycidyl Methacrylate market has been expanding at a significant pace primarily due to the growth in polymer and adhesives industries. Epoxies contain diglycidyl ether of bisphenol A (DGEBA), while GMA is used to provide epoxy functionalization to polyolefins and other acrylate resins.

Applications
GMA (Glycidyl Methacrylate) is used in various applications, such as industrial & protective finishes and waterborne coating resins, to improve the physical and chemical properties of products the plastic segment of the GMA (Glycidyl Methacrylate) market has been expanding substantially due to the extensive usage of GMA (Glycidyl Methacrylate) in adhesives, industrial coatings, and latex. Additionally, rise in investments in R& D activities is driving the Glycidyl Methacrylate market.  

Based on application, the GMA (Glycidyl Methacrylate) can be divided into automotive coating, powder coating, radiation curable coating, industrial and protecting finishes, adhesives, and plastic modifiers. 
GMA (Glycidyl Methacrylate) allows copolymerization functionality with other vinyl monomers in non-aqueous and aqueous solutions, thus making these useful solutions in the packaging sector. 
GMA (Glycidyl Methacrylate) is also largely used in plastic modifiers such as PET, PVC, engineering thermoplastics, and rubber. Thus, it is useful in end-user industries such as packaging. Expansion in the polymer industry and rise in usage of plastics in the packaging industry are estimated to propel the GGMA (Glycidyl Methacrylate) market during the forecast period.

Physicochemical Information:
Boiling point:    189 °C (1013 hPa)
Density:    1.07 g/cm3 (1013 hPa, 25 °C)
Flash point:    76 °C
Melting Point:    <-60 °C
Vapor pressure    :4.2 hPa (25 °C)
Refractive Index:    1.4495 (20 °C)

GMA (Glycidyl Methacrylate) is a colorless liquid with a fruity odor. Floats on water.
GMA (Glycidyl Methacrylate) is a polyfunctional monomer. 
GMA (Glycidyl Methacrylate) acts as an adhesion promoting crosslinking co-monomer for acrylic and vinyl resins. 
GMA (Glycidyl Methacrylate) is also a reactive colorless diluent. GMA is soluble in ethanol, acetone, diethyl ether, benzene.

Uses
GMA (Glycidyl Methacrylate) is a common monomer used in the creation of epoxy resins. 
GMA (Glycidyl Methacrylate) is used to provide epoxy functionalization to polyolefins and other acrylate resins.
GMA (Glycidyl Methacrylate) is used in the production of polymer coatings and finishes, adhesives, plastics and elastomers.
GMA (Glycidyl Methacrylate) dextran has been reported to be used as a biocompatible hydrogel. In situ polymerization of GMA with trimethylolpropane trimethacrylate to form macroporous sorbents has also been reported. GMA may also be grafted onto polypropylene.

Preparation
GMA (Glycidyl Methacrylate) is produced from methacrylic acid and glycidol. 
Glycidol contain both epoxide and alcohol functional groups.
GMA (Glycidyl Methacrylate) is an enoate ester and an epoxide. 
GMA (Glycidyl Methacrylate) derives from a methacrylic acid and a glycidol.

About GMA (Glycidyl Methacrylate)
Helpful information
GMA (Glycidyl Methacrylate) is registered under the REACH Regulation and is manufactured in and / or imported to the European Economic Area, at ≥ 1 000 to < 10 000 tonnes per annum.

GMA (Glycidyl Methacrylate) is used in articles, by professional workers (widespread uses), in formulation or re-packing, at industrial sites and in manufacturing.

Consumer Uses
ECHA has no public registered data indicating whether or in which chemical products the substance might be used. ECHA has no public registered data on the routes by which GMA (Glycidyl Methacrylate) is most likely to be released to the environment.

Article service life
Release to the environment of GMA (Glycidyl Methacrylate) can occur from industrial use: industrial abrasion processing with low release rate (e.g. cutting of textile, cutting, machining or grinding of metal).
Other release to the environment of GMA (Glycidyl Methacrylate) is likely to occur from: outdoor use in long-life materials with low release rate (e.g. metal, wooden and plastic construction and building materials) and indoor use in long-life materials with low release rate (e.g. flooring, furniture, toys, construction materials, curtains, foot-wear, leather products, paper and cardboard products, electronic equipment).
GMA (Glycidyl Methacrylate) can be found in products with material based on: plastic (e.g. food packaging and storage, toys, mobile phones).

Widespread uses by professional workers
GMA (Glycidyl Methacrylate) is used in the following products: pH regulators and water treatment products and laboratory chemicals.
GMA (Glycidyl Methacrylate) is used in the following areas: health services and scientific research and development.
Other release to the environment of GMA (Glycidyl Methacrylate) is likely to occur from: indoor use (e.g. machine wash liquids/detergents, automotive care products, paints and coating or adhesives, fragrances and air fresheners).

Formulation or re-packing
GMA (Glycidyl Methacrylate) is used in the following products: polymers.
Release to the environment of GMA (Glycidyl Methacrylate) can occur from industrial use: formulation of mixtures and formulation in materials.

Uses at industrial sites
GMA (Glycidyl Methacrylate) is used in the following products: polymers and coating products.
GMA (Glycidyl Methacrylate) is used for the manufacture of: chemicals and plastic products.
Release to the environment of GMA (Glycidyl Methacrylate) can occur from industrial use: for thermoplastic manufacture, as processing aid, as an intermediate step in further manufacturing of another substance (use of intermediates), in the production of articles and in processing aids at industrial sites.

Manufacture
Release to the environment of GMA (Glycidyl Methacrylate) can occur from industrial use: manufacturing of the substance.

IUPAC names:
(2,3-Epoxy-propyl)-methacrylat
(2S)-oxiran-2-yl]methyl 2-methylprop-2-enoate
(oxiran-2-yl)methyl 2-methylprop-2-enoate
2,3-Epoxypropyl methacrylate
2,3-epoxypropyl methacrylate
2,3-epoxypropyl methacrylate
2,3-epoxypropyl methacrylate/glycidyl methacrylate
2,3-epoxypropyl methacrylate/glycidyl methacrylate
2,3-epoxypropyl methacrylate; glycidyl methacrylate
2,3-Epoxypropylmethacrylat
2-Oxiranylmethyl 2-methylacrylate, Glycidyl methacrylate
2-propenoic acid, 2-methyl-,2-oxiranylmethyl ester
GLYCIDYL METHACRYLATE
Glycidyl Methacrylate
Glycidyl methacrylate
glycidyl methacrylate
Glycidyl Methacrylate
Glycidyl methacrylate
Glycidyl Methacrylate (stabilized with MEHQ)
glycidylmethacrylate
GMA
Methacrylsäure-2,3-epoxypropylester
oxiran-2-yl methyl 2-methylprop-2-enoate
oxiran-2-ylmethyl 2-methylprop-2-enoate
oxiran-2-ylmethyl methacrylate


SYNONYMS:
(±)-Glycidyl methacrylate
(oxiran-2-yl)methyl 2-methylprop-2-enoate
106-91-2 [RN]
2,3-EPOXYPROPYL METHACRYLATE
2,3-Epoxypropyl methacrylic acid ester
2-[(Methacryloyloxy)methyl]oxirane
203-441-9 [EINECS]
2-Methyl-2-propenoic acid oxiranylmethyl ester
2-Oxiranylmethyl methacrylate [ACD/IUPAC Name]
2-Oxiranylmethylmethacrylat [German] [ACD/IUPAC Name]
2-Propenoic acid, 2-methyl-, oxiranylmethyl ester [ACD/Index Name]
Allyl glycidyl ether [UN2219] [Flammable liquid]
Glycidol methacrylate
Glycidyl methacrylate [Wiki]
Glycidyl α-methylacrylate
GMA
Méthacrylate de 2-oxiranylméthyle [French] [ACD/IUPAC Name]
Methacrylic acid 2,3-epoxypropyl ester
Methacrylic acid, 2,3-epoxypropyl ester
MFCD00005137 [MDL number]
oxiran-2-ylmethyl methacrylate
R8WN29J8VF
Sartomer 379
sy-monomer g
UNII:R8WN29J8VF
2,3-EPOXYPROPYL METHACRYLATE
2-METHYL-ACRYLIC ACID OXIRANYLMETHYL ESTER
GLYCIDYL A-METHYLACRYLATE
GLYCIDYL METHACRYLATE
METHACRYLIC ACID 2,3-EPOXYPROPYL ESTER
METHACRYLIC ACID GLYCIDYL ESTER
1-Propanol, 2,3-epoxy-, methacrylate
2-((methacryloxy)methyl)oxirane
2,3-epoxy-1-propanol,methacrylate
2,3-epoxy-1-propanomethacrylate
2,3-Epoxypropanol methacrylate
2-methyl-2-propenoicacid,oxiranylmethylester
2-methyl-2-propenoicacioxiranylmethylester
2-Oxiranylmethyl 2-methylacrylate
2-Propenoicacid,2-methyl-,oxiranylmethylester
acriesterg
blemmerg
blemmergma
CP 105
cp105


 

  • Share !
E-NEWSLETTER