GOLPANOL PS

Golpanol PS is a superior and basic rinse aid for nickel.
Golpanol PS is used to formulate brightener additives for the electroplating industry.

CAS Number: 55947-46-1
EC Number: 259-915-0
IUPAC Name: sodium;prop-2-yne-1-sulfonate
Chemical Formula: C3H3O3SNa

Other names: 55947-46-1, sodium prop-2-yne-1-sulfonate, Sodium propynesulfonate, 2-Propyne-1-sulfonic acid, sodium salt, sodium;prop-2-yne-1-sulfonate, sodium propyne sulfonate, 2-Propyne-1-sulfonic acid, sodium salt (1:1), Sodium 2-propyne-1-sulphonate, MFCD08274656, propynesulfonic acid sodium salt, 2-Propyne-1-sulfonic acid sodium salt, sodium propargyl sulfonate, sodiumprop-2-yne-1-sulfonate, SCHEMBL1177705, DTXSID10884691, BCP18902, EINECS 259-915-0, AKOS006228899, 1-Propyne-3-sulfonic acid sodium salt, AT26628, CS-0149649, FT-0656864, Sodium prop-2-yne-1-sulfonate, 20% in water, W-105538

Appearance: Golpanol PS is a clear, yellowish or brownish liquid.
Shelf life: Golpanol PS has a shelf life of 2 years in its sealed original packaging, provided it is stored properly.

Golpanol PS is used as a top brightener and leveling agent for electroplated nickel at concentrations of 5 –150 mg/l.

Solubility: Golpanol PS is miscible with water in all proportions.
Golpanol PS is used as a top brightener and leveling agent for electroplated nickel at concentrations of 5 –150 mg/l.

Golpanol products are special additives for nickel plating. 
Golpanol PS is used besides others for decorative applications.

Physical and Chemical Properties
Form: liquid
Odour: product specific
Odour threshold: not determined
Colour: yellowish to brown
pH value: 2 - 2.5
solidification temperature: < 0 °C ( 1,013 hPa)
Boiling point: approx. 100 °C ( 1,013 hPa) contains water

Flash point: A flash point determination is unnecessary due to the high water content. 
Flammability: not highly flammable
Lower explosion limit: For liquids not relevant for classification and labelling.
Upper explosion limit: For liquids not relevant for classification and labelling.

Autoignition: Based on the water content the product does not ignite.
Vapour pressure: 23.4 mbar
Density: 1.15 - 1.25 g/cm3
Relative density: No data available.
Vapour density: not determined

Partitioning coefficient noctanol/water (log Pow): -4.318 
Self-ignition temperature:
Based on its structural properties the product is not classified as selfigniting.
Thermal decomposition: No decomposition if stored and handled as prescribed/indicated.
Viscosity, dynamic: not determined

Viscosity, kinematic: < 100 mm2/s
Particle size: The substance / product is marketed or used in a non solid or granular form.
Solubility in water: fully soluble
Evaporation rate: not determined

APPLICATIONS of Golpanol PS:
Golpanol PS is an intermediate used in production of brightening additives for electroplating in bright Nickel plating baths.
Golpanol PS acts as a Class I & Class II brightener and promotes throwing power, clarity, low current density area brightness and levelling.

Golpanol PS is used to formulate brightener additives employed in the electroplating industry. 
Golpanol PS is employed as a top brightener and levelling agent for electroplated nickel at concentrations of 5 - 150 mg/l.

Applications of Golpanol for nickel electroplating
Golpanol products are special additives for nickel plating. 

They are used besides others for decorative applications. 
In chrome plating the chrome layer itself is very thin. 
The subjacent level is nickel as the primer layer providing brightness.

STORAGE CONDITION of Golpanol PS:
Golpanol PS has a shelf life of one year in its sealed original packaging, provided it is stored properly.