Quick Search
CAS Number: 928663-45-0
ISELUX LQ-CLR-SB is our latest technological breakthrough in surfactant chemistry.
ISELUX LQ-CLR-SB is an extremely mild surfactant that can be used in formulations as a primary or secondary surfactant and is ideally used where a dense, luxurious foam and elegant after-feel is desired.
ISELUX LQ-CLR-SB provides gentle yet thorough cleansing with outstanding rinseability.
The excellent water solubility properties of ISELUX LQ-CLR-SB allow the formulator to produce crystal clear liquid cleansing systems.
The secondary ester structure of ISELUX LQ-CLR-SB makes it more hydrolytically stable than many common esters and this coupled with ISELUX LQ-CLR-SB broad pH stability range makes formulating easy.
ISELUX LQ-CLR-SB is ideal for use in shower gels, facial cleansers, shampoos, liquid cleansing systems, and luxury foam baths.
ISELUX LQ-CLR-SB can also be used to prepare high performance, “sulfate-free” personal cleansing products as well as structured liquid systems.
ISELUX LQ-CLR-SB enables the creation of crystal clear liquid products that are exceptionally luxurious and gentle on the skin.
This version is a 32% active, clear, pale yellow liquid.
ISELUX LQ-CLR-SB is a sulfate-free anionic surfactant for clear and opaque systems.
ISELUX LQ-CLR-SB is an extremely mild surfactant that is ideal for use in shower gels, facial cleansers, shampoos, liquid cleansing systems, and luxury foam baths.
ISELUX LQ-CLR-SB can be used in formulations as a primary or secondary surfactant and is ideally used where a dense, luxurious foam and elegant after-feel is desired.
The excellent water solubility properties allow the formulator to produce crystal clear liquid cleansing systems.
ISELUX LQ-CLR-SB is a sulphate-free anionic surfactant for clear and opaque system with 32% active content.
ISELUX LQ-CLR-SB contains sodium benzoate as preservative.
The pH for formulation should be in the range of 4.5-8.5.
ISELUX LQ-CLR-SB is recommended for use in cosmetics and personal care applications.
ISELUX LQ-CLR-SB is an easy-to-use liquid version of sodium lauroyl methyl isethionate.
ISELUX LQ-CLR-SB contains the following:
Sodium benzoate as preservative,
Trisodium ethylenediamine disuccinate as a chelant.
Uses of ISELUX LQ-CLR-SB:
ISELUX LQ-CLR-SB is a sulphate-free anionic surfactant for clear and opaque system with 32% active content by Innospec.
ISELUX LQ-CLR-SB contains sodium benzoate as preservative.
The pH for formulation should be in the range of 4.5-8.5.
ISELUX LQ-CLR-SB is recommended for use in cosmetics and personal care applications.
Features of ISELUX LQ-CLR-SB:
ISELUX LQ-CLR-SB is a unique, breakthrough technology.
ISELUX LQ-CLR-SB is a sulfate-free anionic surfactant for clear and opaque systems.
Other Features of ISELUX LQ-CLR-SB:
Structured Systems achievable,
Dense creamy long-lasting lather,
Elegance after-feel,
Ultra mild surfactant,
Excellent water solubility,
Sulfate free,
1,4-Dioxane free,
Nitrosamine free,
Readily biodegradable,
Derived from natural/renewable resources,
Formulates like an ether sulphate,
Broad pH stability.
Benefits of ISELUX LQ-CLR-SB:
Dramatic formulation flexibility and enhanced creativity,
Creates a luxurious bath and shower experience,
Ideal for sensitive skin,
Can be used in clear systems,
Safe at all use levels,
Readily biodegradable,
Friendly to the environment,
Formulating ease and flexibility.
Functions of ISELUX LQ-CLR-SB:
Foaming Agent/Foamer
Hair Cleanser/Shampoo
Skin Cleanser
Surfactant-Anionic
Formulating of ISELUX LQ-CLR-SB:
ISELUX LQ-CLR-SB is easy to formulate with as ISELUX LQ-CLR-SB is pre-blended into a clear solution.
Add remaining materials (co-surfactants, polymers, conditioning agents, etc.) into ISELUX LQ-CLR-SB solution.
Adjust to desired pH. When using amphoteric co-surfactants, optimum clarity is reached between pH 5.0 to 6.0.
If desired, electrolytes such as Sodium Chloride can be used in combination with co-surfactants such as cocamidopropyl betaine to increase viscosity
Clarity of ISELUX LQ-CLR-SB:
ISELUX LQ-CLR-SB provides crystal-clear formulations.
Mildness of ISELUX LQ-CLR-SB:
ISELUX LQ-CLR-SB shows a reduced irritancy profile versus other common surfactants.
Foaming Profile of ISELUX LQ-CLR-SB:
ISELUX LQ-CLR-SB has an excellent foaming profile.
ISELUX LQ-CLR-SB's flash foam is comparable to the flash foam of sodium laureth sulfate and ISELUX LQ-CLR-SB forms tight, thick long-lasting bubbles.
pH Stability of ISELUX LQ-CLR-SB:
ISELUX LQ-CLR-SB shows excellent stability over a broad pH range and can be incorporated into formulations ranging from pH 4.5-8.5.
ISELUX LQ-CLR-SB has also proven to be stable in formulations under high and low temperature stability conditions.
Thickening:
ISELUX LQ-CLR-SB solutions will thicken slightly with the addition of electrolytes such as Sodium Chloride.
The addition of secondary surfactants such as cocamidopropyl betaine and sodium lauroamphoacetate can be used to further enhance viscosity.
Preparation Procedure of ISELUX LQ-CLR-SB:
Blend ingredients of phase A, one at a time, into system and mix until uniform.
Add the pre-mix B and mix until uniform.
Add Preservative and mix until uniform.
Adjust pH of the system to 5.5-6.0 with a 50% citric acid solution as needed.
Add sodium chloride incrementally as needed to increase viscosity and mix thoroughly.
Storage of ISELUX LQ-CLR-SB:
Produce may haze and/or thicken in cold storage, allow ISELUX LQ-CLR-SB to equilibrate to room temperature before using.
Safety and Certifications of ISELUX LQ-CLR-SB:
GHS classification, Hazard statements, Certifications, Renewable Carbon Index (RCI)
Properties of ISELUX LQ-CLR-SB:
Appearance: Clear beaded gel
pH: 5.5 - 6.5
Viscosity: 8,000 - 12,000 cps
Stability: Passed 1 month at 45°C
Appearance: Clear light yellow liquid
Odour: Mild, characteristic
Activity, %: 32 minimum
Non-Volatiles, %: 39 minimum
pH (as is): 5.5-6.5
Color, APHA (as is): 200 maximum
Viscosity (cps) @: 25ºC
Other Descriptions of ISELUX LQ-CLR-SB:
Name:
ISELUX LQ-CLR-SB
Segment:
Personal care
INCI name:
Sodium Lauroyl Methyl Isethionate
CAS numbers:
928663-45-0
Chemical Composition:
Sodium Lauroyl Methyl Isethionate
Claims:
Hair Care:
Cleansing
Skin/Body:
Cleansing
Suggested Formulations:
Skin Care, Hair Care
Our Range:
PUREACT I-78
PUREACT I-78 Flakes
PUREACT I-78C
PUREACT I-78-6
PUREACT I-80P
PUREACT I-85F
PUREACT I-85C
PUREACT I-85E Flakes
PUREACT I-85EC
PUREACT SLI
Other products:
ISELUX
ISELUX CO
ISELUX LQ-CLR-SB
ISELUX SCMI
PUREACT I-78P
PUREACT I-78 Flakes
PUREACT I-78C
PUREACT I-78-6
PUREACT I-80P
PUREACT I-85F
PUREACT I-85C
PUREACT I-85E Flakes
PUREACT I-85 EC
PUREACT SLI
PUREACT SNDT-65
PUREACT SNDT-65 CO
PUREACT SNDT-CB
Synonyms of ISELUX LQ-CLR-SB:
sodium lauroyl methyl isethionate
Sodium lauroyl 2-methyl isethionate
928663-45-0
Dodecanoic acid, methyl-2-sulfoethyl ester, sodium salt (1:1)
UNII-HR8O7441H1
HR8O7441H1
(+/-)-Sodium lauroyl 2-methyl isethionate
Sodium 2-(dodecanoyloxy)propane-1-sulfonate
EC 700-150-3
Sodium lauroyl 2-methyl isethionate, (+/-)-
SCHEMBL19435248
Dodecanoic acid, 1-methyl-2-sulfoethyl ester, sodium salt
DTXSID40892007
Dodecanoic acid, 1-methyl-2-sulfoethyl ester, sodium salt (1:1)
156572-81-5
Q27280064
SODIUM ISETHIONATE
1562-00-1
Sodium 2-hydroxyethanesulfonate
Isethionic acid sodium salt
2-Hydroxyethanesulfonic acid sodium salt
Sodium hydroxyethylsulfonate
Ethanesulfonic acid, 2-hydroxy-, monosodium salt
UNII-3R36J71C17
MFCD00007534
Sodium beta-hydroxyethanesulfonate
3R36J71C17
Ethanesulfonic acid, 2-hydroxy-, sodium salt (1:1)
Sodium 2-hydroxyethanesulphonate
Sodium 1-hydroxy-2-ethanesulfonate; Sodium 2-hydroxy-1-ethanesulfonate; Sodium 2-hydroxyethanesulfonate
Sodium 2-hydroxyethylsulfonate
HSDB 5838
Sodium 1-hydroxy-2-ethanesulfonate
Sodium 2-hydroxy-1-ethanesulfonate
EINECS 216-343-6
NSC 124283
sodium;2-hydroxyethanesulfonate
Ethanesulfonic acid, 2-hydroxy-, sodium salt
isethionic acid sodium
2-Hydroxyethanesulfonic acid, sodium salt
2-hydroxy-ethanesulfonate
C2H5NaO4S
DSSTox_CID_7413
EC 216-343-6
DSSTox_RID_78445
DSSTox_GSID_27413
Isethionic acid, sodium salt
Istethionic Acid Sodium Salt
SCHEMBL125497
CHEMBL172191
DTXSID7027413
Sodium 2-Hydroxy-Ethanesulfonate
Isethionic acid sodium salt, 98%
HY-Y1173
2-hydroxyethanesulfonic acid; sodium
Tox21_200227
AKOS015912506
NCGC00257781-01
O645
CAS-1562-00-1
CS-0017163
FT-0627314
H0241
A809723
J-009283
Q1969744
F1905-7166
2-Hydroxy Ethanesulphonic Acid Sodium Salt, Isethionic Acid Sodium Salt, Ethanol Sulphonic Acid Sodium Salt
