Quick Search

PRODUCTS

ISOTRIDECYL ALCOHOL 30 EO 70 %

ISOTRIDECYL ALCOHOL 30 EO 70 %

Composition: Isotridecyl polyethylene glycol ether with 30-mole ethylene oxide 


ISOTRIDECYL ALCOHOL 30 EO 70 %: Aqueous solution of a fatty alcohol polyglycol ether.

CAS number: 9043-30-5


Synonyms: C 13 Alcohol 30 Ethoxylate, 70 % in Water, Fatty alcohol polyglycol ether, Isotridecyl polyethylene glycol ether with 30-mole ethylene oxide, C 13 Alcohol 30 EO, 

ISOTRIDECYL ALCOHOL 30 EO 70% is a nonionic emulsifier for emulsion polymerization.


Use of ISOTRIDECYL ALCOHOL 30 EO 70 %:

The use of ISOTRIDECYL ALCOHOL 30 EO 70% in emulsion polymerization of vinyl acetate, acrylate, and acrylate/styrene dispersions reduces coagulation and improves electrolyte resistance and freeze/thaw stability.

ISOTRIDECYL ALCOHOL 30 EO 70 % is added to the emulsion before, during, or after the polymerization process.

ISOTRIDECYL ALCOHOL 30 EO 70 % improves latex stability and prevents coagulation during polymerization.

Improving the latex properties means better electrolyte, shear stability, and freeze-thaw stability.

Use of the substance/preparation:

Industry sector: Industrial Performance Chemicals
Type of use: Emulsifier for emulsion polymerization

Product properties *)
Active substance content 
about 70 % with 30% water 


Item: Specification

Consistency at 20°C: liquid (visual)            

Transparency at 20°C: clear (visual)            

Hazen colour: max. 130 EN 1557

pH value 5% as is in water: 6.0 - 8.0  DIN EN 1262

Water content: 29.0 - 31.0 %  DIN 51777

Viscosity (dynamic): approx. 2.300 mPa.s (20 °C) Brookfield

Viscosity at 50°C: 100 - 200 mPas  ISO 6388

Pourpoint: approx. 5 °C   DIN/ISO 3016


Appearance 
at 5°C: white paste 
at 25°C: clear, colorless liquid 
at 50°C: clear, colorless liquid 
pH value (DIN EN 1262), 5 % as is in water: 6 - 8 


Solubility at 25 °C: clear soluble in water 

Density at 25 °C: approx. 1.08 g/cm³ 

Viscosity at 25 °C (Brookfield, Spindle LV1): about 700 mPas 

Flashpoint (DIN/ISO 2592): > 100 °C

Critical Micelle Concentration: 0,88 g/l active material in water

Surface Activity at 1 g/l active substance: about 38 mN/m

HLB value: about 17

Biodegradability: 57 % (28 d)

Method: OECD 301 B

Fish toxicity : LC50 > 100 mg/l (96 h, zebrafish)

Method: OECD 203

Bacteria toxicity : EC50 > 5 mg/l (Vibrio fisheri)

Method: DIN EN ISO 11348-2

Dissolved Organic carbon(DOC) : 1.919 mg/g
Method: DIN/EN 1484

Chemical oxygen demand (COD): 632 mg/g
Method: ISO/DIS 15705

Isotridecyl Alcohol 30 EO 70 % is used in the Emulsion polymerization of styrene, acrylic acid copolymers, and vinyl acetate copolymers.

Isotridecyl Alcohol 30 EO 70 % is liquid and readily miscible, and it has substantial wetting and emulsifying properties.

Isotridecyl Alcohol 30 EO 70 enables higher dispersion, freeze-thaw, and electrolyte stability.

Application of Polymers, where ISOTRIDECYL ALCOHOL 30 EO 70 % is used:

1. Paints and coatings applications
– Architectural coatings (paints)
– Industrial coatings
– Wood coatings

2. Paper application
– Paper sizing
– Pulp binder

3. Adhesives

4. Carpet back sizing application

5. Textile application

6. Caulk and sealants, cement concrete application

7. Others

Handling and Storage
Below 15°C ISOTRIDECYL ALCOHOL 30 EO 70% starts crystallization after heating
up at 30°C ISOTRIDECYL ALCOHOL 30 EO 70% turns into a clear liquid again.

This information is based on our present knowledge and is intended to provide general notes on our products and their uses. 
It should not, therefore, be construed as guaranteeing specific properties of the products described on their suitability for a particular application. 
Any existing industrial property rights must be observed. 
The quality of our products is guaranteed under our General Conditions of Sale.

*) These characteristics are for guidance only and should not be considered product specifications. 
The tolerances are given in the product specification sheet. 
For further information on product properties, toxicological, ecological, and safety data, please refer to the safety data sheet.

OTHER PRODUCTS OF ATAMAN CHEMICALS THAT MIGHT BE OF INTEREST:

ISOTRIDECYL ALCOHOL 40 EO 70 %
C13 Alcohol 40 EO 70 %
NP 40
Nonyl Phenol 40 Ethoxylate


ISOTRIDECYL ALCOHOL 50 EO 60 %
C13 Alcohol 50 EO 60 %
NP 50
Nonyl Phenol 50 Ethoxylate


Please check www.atamankimya.com for more products.

 
  • Share !
E-NEWSLETTER