PRODUCTS

LICOWAX C

LICOWAX C = N,N'-ETHYLENEDI (STEARAMIDE)

CAS Number: 110-30-5
EC Number: 203-755-6
MDL Number: MFCD00059224
Linear Formula: (CH2NHC(O)C17H35)2

Licowax C is an amide wax of type N,N-bis-stearyl ethylenediamine with particularly good thermostability.
Licowax C is an amide wax of type N,N-bis-stearyl-ethylenediamine.
Compatible with styrene & styrenic copolymer, PVC, PO and PS.

Licowax C exhibits good thermostability and excellent slip properties.
Licowax C powder is an amide wax of type N,N-bis-stearyl ethylenediamine with particularly good thermostability.
Licowax C has no influence on the transparency of the Polymers.

Licowax C is an organic compound with the formula (CH2NHC(O)C17H35)2.
Licowax C is a waxy white solid and is also found as powder or beads that is widely used as a form release agent.
Licowax C is derived from the reaction of ethylenediamine and stearic acid.

Licowax C is a white solid that provides a slippery coating for a variety of applications.
Licowax C is a hard and brittle white high melting point wax, Licowax C's industrial products are slightly yellow fine particles, insoluble in most solvents at room temperature, stable to acids and bases, and aqueous media, soluble in hot chlorinated hydrocarbons and aromatic hydrocarbons solvents, Licowax C’s powder slippery feeling strong, above 80 ℃ to water with wettability of the compound.

USES and APPLICATIONS of LICOWAX C:
-Licowax C is used as an internal and external slip agent in many thermoplastic and thermosetting plastics, the most representative ones are ABS, PS, ABS, PVC, also used in PE, PP, PVAC, cellulose, Accurate, Nylon, phenolic-Resin, amino plastics.
-Licowax C has a good finish and good film release.

-As a lubricant of polyformaldehyde, the addition amount is 0.5%, which improves the melt flow rate and the film release, and the whiteness, thermal stability and physical index of polyformaldehyde all reach the superior index.
-Chemical fiber:
Licowax C can improve the heat and weather resistance, fluidity of polyester, polyamide fiber, and give a certain anti-static effect.

-Rubber:
Synthetic resins and rubber such as Vinyl, polychloroprene, GRS (SBR) add 1~3% EBS to their emulsions, it has a good anti-viscosity and anti-caking effect, EBS is used in floor mats for automobiles, drainage pipes, and other rubber products to increase the effect of surface gloss.

-Release agent:
Phenolic resin for sand casting with Licowax C can be used as a release agent.
-Powder Coating:
Licowax C can be used as flow additives for powder coatings.

-Pigment, filler dispersant:
*Licowax C is used as a pigment dispersant for plastic.
*Pigment dispersant for chemical fiber masterbatches, such as ABS, PS, polypropylene, polyester masterbatches.
*Licowax C can also be used as diffusion powder for plastic color matching.
*Depending on the amount of pigment and filler added, the addition amount is 0.5~5%.

-Paint, Ink:
*Adding 0.5~2% Licowax C can improve the effect of salt spray and moisture resistance in the manufacture of paint and lacquer.
*Adding Licowax C in the paint can improve the performance of the paint stripper and can improve the leveling of the baked enamel surface.
*Licowax C can be used as a matting agent in furniture polishing agents and printing ink.
*After micronization (particle size: d50 about 6μ, d 90 about 12μ), Licowax C has excellent anti-abrasion and smoothness and can be used in lacquer systems to improve polishability and degassing on a porous surface.

-Other uses:
*Melting point rising agent for petroleum products
*Lubricant and anti-corrosion agent for metal drawing
*Potting material for electrical components; defoaming agent and paper coating ingredient for paper industry
*Licowax C is used as a defoaming agent and permanent water pulling agent for dyeing works in textile dyeing and finishing
*Adding this product in asphalt can reduce the viscosity of asphalt and improve the softening point, water-resistance and weather resistance of asphalt.

-Licowax C is used in the following products: adhesives and sealants, lubricants and greases, coating products, polishes and waxes and washing & cleaning products.
-Licowax C is used in the following products: washing & cleaning products, lubricants and greases, coating products, inks and toners and polishes and waxes.
-Licowax C is used in the following areas: formulation of mixtures and/or re-packaging.

-Licowax C is used for the manufacture of: rubber products and plastic products.
-Licowax C is used in the following products: polymers, lubricants and greases, metal working fluids, pharmaceuticals and cosmetics and personal care products.
-Licowax C is used for the manufacture of: rubber products, textile, leather or fur, machinery and vehicles and chemicals.

-Licowax C is a synthetic wax used as a dispersing agent or internal/external lubricant for benefits in plastic applications to facilitate and stabilize the dispersion of solid compounding materials to enhance processability, to decrease friction and abrasion of the polymer surface, and to contribute color stability and polymer degradation.
-Licowax C is also used in process industries as release agent and antistatic agent for the production of thermoplastics,and wiring.
-Licowax C is used in powder metallurgy.

-Lubrication performance is excellent, anti-calcium salt ability is strong, drag reduction effect is good, used for drilling in saturated brine to reduce power consumption.
-Licowax C is used in various industries as internal/external lubricant, mold release agent, dispersant and slip- and anti-blocking-agent.
-Because of Licowax C's excellent lubricating properties, Licowax C is widely used internally and/or externally in most plastics such as ABS, PS, PP etc.

-Licowax C is used as additive EBS can be incorporated directly into polymers to prevent any unwanted adhesion.
-Adhesive pellets or film often develop adhesion between the polymer pellets or layers when exposed to elevated temperatures and pressures.
-Licowax C is used to prevent adhesive granulate from sticking together during storage, or to prevent adhesive film layers to attract dirt or stick together before application by reactivation or melting.

-Licowax C can also be used as a process aid, for example to improve dispersion of fillers.
-Licowax C is used as an additive for hot melt adhesives.
-Hot-Melt Adhesive Applications:
*Release agent and flow promoter for all engineering resins, Styrenics and their copolymers.

-Consumer Goods:
*Appliances & Electronics
*Adhesives & Sealants: Industrial & *Assembly Adhesives
*Electronics Adhesives
*Industrial Manufacturing
*Healthcare & Pharma — Medical
*Medical Tapes & Adhesives
*Electrical & Electronics — Packaging & Assembly
*Adhesives & Sealants
*Adhesive & Sealant Type

-Slip- and anti-blocking agent for polyolefins and PVC, especially for film applications and also lubricant for wood plastic composites and plastics.
-Dispersing agent for masterbatch applications, preferably for engineering resins and PVC.
-Licowax C provides typical slip and anti blocking characteristics to all polymers e.g. in films.

-Anti-Blocking Agent, Release Agent, Slip Agent, Flow Promoter
-Hot-Melt Adhesive
-Licowax C improves flow and has no influence on transparency of polymers.

-Licowax C acts as a lubricant, release & antiblocking agent for all engineering resins and dispersing agent for masterbatch applications.
-Licowax C provides typical slip and anti blocking characteristics to all polymers.
-Licowax C powder does not affect the transparency of polymers and acts as lubricant in a wide variety of polymers like PVC, PO, PS and engineering plastics.

BENEFITS of LICOWAX C:
-Excellent slip and anti-blocking properties when used in PVC, engeneering resins, PO film and compounds
-Good release properties in PVC and thermoplastics
-Improves flow of polymers
-No influence on transparency of polymers
-Wide food approval

PHYSICAL and CHEMICAL PROPERTIES of LICOWAX C:
Molecular Weight: 593.02
Appearance Form: solid
Color: white
Odor: odorless
Odor Threshold: No data available
pH: No data available
Melting point/range: 144 - 146 °C
Initial boiling point and boiling range: 260 °C at 1.013 hPa
Flash point ca.270 °C - DIN 51758
Evaporation rate No data available
Flammability (solid, gas): No data available

Upper/lower flammability or explosive limits: No data available
Vapor pressure Not applicable
Vapor density No data available
Relative density No data available
Water solubility at 20 °C insoluble
Partition coefficient: n-octanol/water log Pow: 13,98 at 25 °C
Autoignition temperature: ca.380 °C at 1.013 hPa
Decomposition temperature: > 200 °C -
Viscosity:
*Viscosity, kinematic: No data available
*Viscosity, dynamic: ca.10 mPa.s at 150 °C

XLogP3-AA: 15.7
Hydrogen Bond Donor Count: 2
Hydrogen Bond Acceptor Count: 2
Rotatable Bond Count: 35
Exact Mass: 592.59067967
Monoisotopic Mass: 592.59067967
Topological Polar Surface Area: 58.2 Å²
Heavy Atom Count: 42
Formal Charge: 0

Complexity: 503
Isotope Atom Count: 0
Defined Atom Stereocenter Count: 0
Undefined Atom Stereocenter Count: 0
Defined Bond Stereocenter Count: 0
Undefined Bond Stereocenter Count: 0
Covalently-Bonded Unit Count: 1
Compound Is Canonicalized: Yes

FIRST AID MEASURES of LICOWAX C:
-If inhaled:
*After inhalation:
Fresh air.

-In case of skin contact:
Rinse skin with water/ shower.

-In case of eye contact:
*After eye contact:
Rinse out with plenty of water.
Remove contact lenses.

-If swallowed:
*After swallowing:
Make victim drink water (two glasses at most).
Consult doctor if feeling unwell.

ACCIDENTAL RELEASE MEASURES of LICOWAX C:
-Personal precautions, protective equipment and emergency procedures:
*Advice for non-emergency personnel:
Consult an expert.

-Environmental precautions:
Do not let product enter drains.

-Methods and materials for containment and cleaning up:
Cover drains.
Collect, bind, and pump off spills.
Take up dry.

FIRE FIGHTING MEASURES of LICOWAX C:
-Extinguishing media:
*Suitable extinguishing media:
Water Foam Carbon dioxide (CO2)
Dry powder

*Unsuitable extinguishing media:
For this substance/mixture no limitations of extinguishing agents are given.

EXPOSURE CONTROLS/PERSONAL PROTECTION of LICOWAX C:
-Control parameters:
*Ingredients with workplace control parameters:

-Exposure controls:
--Personal protective equipment:
*Eye/face protection:
Use safety glasses.

*Skin protection:
Full contact:
Material: Nitrile rubber
Minimum layer thickness: 0,11 mm
Break through time: 480 min

Splash contact:
Material: Nitrile rubber
Minimum layer thickness: 0,11 mm
Break through time: 480 min

-Control of environmental exposure:
Do not let product enter drains.

HANDLING and STORAGE of LICOWAX C:
-Conditions for safe storage, including any incompatibilities:
*Storage conditions:
Tightly closed.
Dry.

-Specific end use(s):
No other specific uses are stipulated

STABILITY and REACTIVITY of LICOWAX C:
-Chemical stability:
The product is chemically stable under standard ambient conditions (room temperature).

SYNONYMS
N,N'-Ethylenedi(stearamide)
1,2-Bis(stearoylamino) ethane
N,N′-1,2-Ethanediylbisoctadecanamide
Ethylene distearylamide