Quick Search
CAS Number : 9002-88-4
EC Number : 618-339-3
Molecular Formula : C2H4 or CH2=CH2
Molecular Weight : 28.05
Licowax PE 520 fine grain is a medium molecular weight, non-polar polyethylene wax.
Acts as a lubricant, release, dispersing and anti-scratch agent for rigid PVC extrusion.
Exhibits excellent anti-sticking properties, good thermostability and improved flowability.
Suitable for PE masterbatch, elastomers and rubber applications.
Licowax PE 520 fine grain is approved by FDA regulation.
Licowax PE 520 fine grain has a shelf life of 2 years.
Licowax PE 520 fine grain is a medium-molecular weight, non-polar polyethylene wax.
Acts as an additive.
Exhibits excellent anti-sticking properties when used in PVC melts.
Licowax PE 520 fine grain is used in hotmelt adhesives as viscosity modifier.
Depending on the dosage, open and set time can be adjusted.
Benefits of Licowax PE 520 fine grain
-Excellent anti-sticking properties when used in PVC melts
-Improved flow of PE compounds
-Effective dispersing agent for PE Masterbatch applications
-Provides excellent organoleptic properties, brilliant dispersing properties for pigments, fillers and additives as well as thermal stability and color stability
-Excellent rub and scratch resistance properties
-Effective matting agent in wood coatings
-FDA approved
Applications of Licowax PE 520 fine grain
Licowax PE 520 fine grain is an efficient external lubricant for rigid PVC applications, providing excellent anti-sticking properties to the PVC melt, resulting in a smooth and glossy surface of the end article.
As well Licowax PE 520 fine grain can be used as an internal lubricant for polyolefins providing flow improvement of PE compounds and as an release agent for elastomers and rubber applications.
Licowax PE 520 fine grain is also an effective dispersing agent for PE masterbatch applications, providing excellent organoleptic properties, brilliant dispersing properties for pigments, fillers and additives as well as thermal stability.
Licowax PE 520 fine grain can be used in hotmelt adhesives as viscosity modifier.
Depending on the dosage, open and set time can be adjusted.
Licowax PE 520 fine grain can also be used as a wax compound in printing inks to provide rub and scratch resistance as well as a slip modification additive.
Licowax PE 520 fine grain is especially recommend for offset printing inks.
Licowax PE 520 fine grain can be used in hotmelt adhesives as viscosity modifier.
Depending on the dosage, open and set time can be adjusted.
Licowax PE 520 fine grain can also be used as a wax compound in printing inks to provide rub and scratch resistance as well as a slip modification additive.
Licowax PE 520 fine grain is especially recommend for offset printing inks.
Licowax PE 520 fine grain is a low-density polyethylene wax with branched chains synthesized at low pressure from Ziegler catalysts, with good oxidation resistance and a clean white appearance.
For polyolefins, Licowax PE 520 fine grain is an ideal carrier for masterbatches and functional masterbatches and is also used as an efficient external lubricant.
For color masterbatches and functional masterbatches
Licowax PE 520 fine grain is the most important application in the plastics industry.
Licowax PE 520 fine grain is a polyethylene wax.
Acts as a matting agent.
Improves the scrub resistance of printing inks.
Acts as abrasive, oral care agent and viscosity controlling agent.
Licowax PE 520 fine grain in powder form.
Use as a lubricant for plastics in particular polyolefins (processing aid) and pigment concentrates based on polyolefins (dispersing agent and carrier material).
External lubricant for rigid PVC extrusion.
Release agent for styrenic PBT TPEs and rubber.
Improved gum resistance for printing inks.
Also usable in coatings and paints.
Solvent-based varnish.
Binder for carbon paper.
Cosmetics: abrasive, oral care agent, viscosity control agent
Licowax PE 520 fine grain thermoplastic resins include lowdensity polyethylenes (LDPE), linear low-density polyethylenes (LLDPE), high-density polyethylenes (HDPE), and ethylene copolymers, such as ethylene-vinyl acetate (EVA) and ethylene- ethyl acrylate (EEA), and ultrahighmolecular- weight polyethylenes (UHMWPE).
The basic properties of polyethylenes can be modified with a broad range of fillers, reinforcements, and chemical modifiers, such as thermal stabilizers, colorants, flame retardants, and blowing agents.
Major application areas for Licowax PE 520 fine grain are packaging, industrial containers, automotive, materials handling, consumer products, medical products, wire and cable insulation, furniture, housewares, toys, and novelties.
Licowax PE 520 fine grain, the first of the polyethylenes to be developed, has good toughness, flexibility, low-temperature impact resistance, clarity in film form, and relatively low heat resistance.
Major uses at present are grocery bags, industrial trash bags, liners, and heavy-duty shipping bags for such products as plastic resin pellets.
Rigidity and tensile strength of the HDPE resins are considerably higher than those properties in the low- and medium-density materials.
Impact strength is slightly lower, as is to be expected in a stiffer material, but values are high, especially at low temperatures, compared with those of many other thermoplastics.
Licowax PE 520 fine grains are available with broad, intermediate, and narrow molecular-weight distribution, which provides a selection to meet specific performance requirements.
As with the other polyethylene grades, very-high-molecular- weight copolymers of HDPE resins are available with improved resistance to stress cracking.
FIRST AID MEASURES of Licowax PE 520 fine grain
If inhaled :
Move the victim to fresh air.
Give oxygen or artificial respiration if needed.
Get immediate medical advice/ attention.
Never give anything by mouth to an unconscious person.
In case of skin contact :
Wash with soap and water.
Contact physician if irritation or other symptoms occur.
If hot wax strikes skin, drench or immerse the area in water to assist cooling.
Do not remove wax from a burn after it cools.
Consult a physician.
In case of eye contact :
Flush eyes with water at least 15 minutes.
Get medical attention if eye irritation develops or persists.
If swallowed :
If swallowed, DO NOT induce vomiting.
Do not give anything to drink.
Call a physician immediately.
Substance identity
EC / List no.: 618-339-3
CAS no.: 9002-88-4
Hazard classification & labelling of Licowax PE 520 fine grain
According to the majority of notifications provided by companies to ECHA in CLP notifications no hazards have been classified.
Licowax PE 520 fine grain indicated, in 2009, as being intended to be registered by at least one company in the EEA.
Licowax PE 520 fine grain for which classification and labeling data have been submitted to ECHA in a registration under REACH or notified by manufacturers or importers under CLP. Such notifications are required for hazardous substances, as such or in mixtures, as well as for all substances subject to registration, regardless of their hazard.
Synonyms:
Ethene, homopolymer
Polyethylene
polyethylene wax
(2-hydroxyethyl)dimethyl[3-[(1-oxooctadecyl)amino]propyl]ammonium nitrate
(2-pseudoatomioethyl)pseudoatom
deuterioethene
ETHENE
ethene
Ethene homopolymer
ETHENE, HOMOPOLYMER
Ethene, homopolymer
ethene, homopolymer
Ethylene polymer
Homopolymer of ethylene monomers
K4133
not listed
Poly(ethene)
Poly(ethylene)
Poly(ethylene).
polyethene
Polyethylen
POLYETHYLENE
Polyethylene
polyethylene
Polyethylene High Density
Polyethylene high density
Polyethylene Powder
Polyethylene Wax
Polyethylene wax
polyethylene wax
Polyethylene, Polyethene
POLYTHENE
prach polyethylenu
Polyethylene
Polyglue
Epolene Wax
Ersatzbrennstoff (EBS)
ethylenpolymere
high density polyethylene
Medium Density Polyethylene
Poly ethylene Wax
polyethyleen foil
Polyethylen wax
Polyethylene
Polyethylene (PE)
polyethylene wax
Polymer
1010857-01-8
101484-63-3
112821-11-1
112821-13-3
113690-26-9
1137119-09-5
114013-55-7
114471-09-9
1187527-29-2
ETHYLENE
Ethene
Acetene
Elayl
Olefiant gas
POLYETHYLENE
74-85-1
9002-88-4
Athylen
Etileno
Liquid ethylene
Bicarburretted hydrogen
Caswell No. 436
Ethylene, pure
Aethylen
C2H4
HSDB 168
Aethen
Liquid ethyene
EPA Pesticide Chemical Code 041901
Ethylene (8CI)
Ethene (9CI)
CH2=CH2
H2C=CH2
Polyethylene as med Mol. Wt.
CHEBI:18153
91GW059KN7
MFCD00084423
UN 1038
UN 1962
Plastipore
Athylen [German]
Polyethylene as
Ethylene [NF]
LDPE
EINECS 200-815-3
UN1038
UN1962
Ethyleneradical
Ethylene latex
UNII-91GW059KN7
Ethylene, compressed
Ethene, 9CI
ETHYLENE-CMPD
ETHYLENE [HSDB]
ETHYLENE [IARC]
ETHYLENE [II]
ETHYLENE [MI]
Ethylene, 99.99%
EC 200-815-3
Ethylene, >=99.5%
Ethylene, >=99.9%
Ethylene, compressed [UN1962] [Flammable gas]
CARBONEUM HYDROGENISATUM
CHEMBL117822
Ethylene, purum, >=99.9%
DTXSID1026378
Polyethylene granules, high density
CMC_13849
AKOS015915514
CARBONEUM HYDROGENISATUM [HPUS]
Polyethylene, low density, 500 micron
Polyethylene, low density, 1000 micron
Ethylene, Messer(R) CANGas, 99.98%
Ethylene, puriss., >=99.95% (GC)
Polyethylene, low density, <=400 micron
FT-0626287
C06547
C19503
R-1150
Ethylene, refrigerated liquid (cryogenic liquid)
Ethylene, compressed [UN1962] [Flammable gas]
Q151313
Polyethylene rod, Low Density, 16mm (0.63in) dia
Polyethylene rod, Low Density, 19mm (0.75in) dia
Polyethylene, UHMW, >150 micron, MW 3-6 million
Polyethylene rod, High Density, 19mm (0.75in) dia
Polyethylene rod, Low Density, 12.7mm (0.5in) dia
Q27286698
Polyethylene rod, High Density, 6.35mm (0.25in) dia
Polyethylene rod, Low Density, 6.35mm (0.25in) dia
Polyethylene sheet, Low Density, 12.7mm (0.5in) thick
Polyethylene sheet, High Density, 1.6mm (0.063in) thick
Polyethylene sheet, High Density, 12.7mm (0.5in) thick
Polyethylene sheet, High Density, 6.35mm (0.25in) thick
Polyethylene sheet, Low Density, 1.6mm (0.063in) thick
Polyethylene sheet, Low Density, 3.18mm (0.125in) thick
Polyethylene sheet, Low Density, 6.35mm (0.25in) thick
Polyethylene sheet, High Density, 3.18mm (0.125in) thick
Ethylene, refrigerated liquid (cryogenic liquid) [UN1038] [Flammable gas]
n-Butane
106-97-8 [RN]
203-448-7 [EINECS]
969129 [Beilstein]
Butan [German] [ACD/IUPAC Name]
Butane [ACD/Index Name] [ACD/IUPAC Name] [USAN] [Wiki]
Butane [French] [ACD/Index Name] [ACD/IUPAC Name]
butane fuel
butane gas
Butanen [Dutch]
Butani [Italian]
gas butane
MFCD00009424 [MDL number]
7582-04-9 [RN]
9002-88-4 [RN]
Butane-1,1,1,4,4,4-d6
R-600
refrigerant gas R600
6LV4FOR43R [DBID]
EJ4200000 [DBID]
UN 1011 [DBID]
18921_FLUKA [DBID]
443670_ALDRICH [DBID]
494402_ALDRICH [DBID]
A 21 [DBID]
CCRIS 2279 [DBID]
CCRIS 661 [DBID]
CHEBI:25462 [DBID]
D03186 [DBID]
D12 [DBID]
F09 [DBID]
FEMA Number 3245 [DBID]
Flavis number 8.042 [DBID]
HC 600 [DBID]
HSDB 90 [DBID]
HSDB 944 [DBID]
NSC 62784 [DBID]
PLM [DBID]
PubChem Substance ID 57648092 [DBID]
R 600 [DBID]
UN1011 [DBID]
UN1206 [DBID]
UNII:6LV4FOR43R [DBID]
UNII-6LV4FOR43R [DBID]
