Quick Search
Lugalvan G 35 is used to formulate brightener additives employed in the electroplating industry, especially as a polymeric basic brightener in zinc electrolytes.
Application of Lugalvan G 35:
Lugalvan G 35 is used to formulate brightener additives employed in the electroplating industry, especially as a polymeric basic brightener in zinc electrolytes.
Lugalvan G 35 is employed at a concentration of 0.5 – 5 g/l.
Lugalvan G 35 is also used as a protective colloid in the chemical and allied industries.
Lugalvan G 35 is used to formulate brightener additives in the electrical industry, especially as a primary brightener for zinc bath monomers, which can effectively improve the dispersibility of the bath.
At the same time Lugalvan G 35 can also be used for tin plating and electroless copper plating.
Safety of Lugalvan G 35:
We know of no ill effects that could have resulted from using Lugalvan G 35 for the purpose for which Lugalvan G 35 is intended and from processing Lugalvan G 35 in accordance with current practice.
According to the experience we have gained over many years and other information at our disposal, Lugalvan G 35 does not exert any harmful effects on health, provided that Lugalvan G 35 is used properly, due attention is given to the precautions necessary for handling chemicals, and the information and advice given in our safety data sheet are observed.
Accidental Release Measures of Lugalvan G 35:
Personal precautions, protective equipment and emergency procedures:
Use personal protective clothing.
Environmental precautions:
Contain contaminated water/firefighting water.
Do not discharge into drains/surface waters/groundwater.
Methods and material for containment and cleaning up:
For large amounts: Dike spillage.
Pump off product.
For residues: Pick up with suitable absorbent material.
Dispose of absorbed material in accordance with regulations.
Handling and Storage of Lugalvan G 35:
Precautions for safe handling:
No special measures necessary provided product is used correctly.
Protection against fire and explosion:
No special precautions necessary.
Conditions for safe storage, including any incompatibilities:
Suitable materials for containers: Stainless steel 1.4401, Stainless steel 1.4301 (V2), Polyester resin, glass reinforced (Palatal A410), High density polyethylene (HDPE), glass, Low density polyethylene (LDPE)
Further information on storage conditions: Keep container tightly closed and in a cool place.
Protect from temperatures above: 40 °C
Storage of Lugalvan G 35:
Solidified product should be heated up to about 50 °C and homogenized before Lugalvan G 35 will be processed.
Lugalvan G 35 has a shelf life of one year in its sealed original packaging, provided it is stored properly.
Properties of Lugalvan G 35:
Physical form: Slightly cloudy, colourless or yellowish liquid
Concentration (BASF method derived from ISO 3251, 2 g, 130 °C, 2 h): 48 – 52 %
Refractive index (DIN 51423, Part 2, 23 °C): approx. 1.450
Viscosity (ISO 2431, No. 4, 20 °C): 80 – 130 s
pH (BASF method derived from ISO 976, 10 %): 10 – 12
Density (DIN 51757, ASTM D 1298, hydrometer, 23 °C): approx. 1.08 g/cm3
Solubility of Lugalvan G 35:
Lugalvan G 35 is soluble in water
Appearance of Lugalvan G 35:
Lugalvan G 35 is a slightly cloudy, colorless or yellowish liquid.
Chemical nature of Lugalvan G 35:
Low-molar-mass polyethylenimine
Other Lugalvan Products:
Lugalvan G 35
Lugalvan HS 1000
Lugalvan P
Lugalvan BNO 12
Lugalvan IZE
Lugalvan IMZ
Lugalvan DC
Lugalvan BPC-48
Lugalvan EH 158
Lugalvan EHS
Lugalvan FDC
Lugalvan G 20
Lugalvan G 35
Lugalvan NES
Lugalvan TC-BAR
Lugalvan TC-OCB
Lugalvan ANA
Lugalvan BNO
Lugalvan BNO 24
Lugalvan BPC 48
Lugalvan EDC
Lugalvan FDCP
Lugalvan EH 158
Lugalvan G 15000
Lugalvan BAN
Lugalvan BAR
Lugalvan BAT
Lugalvan BNS
Lugalvan BPC 48
Lugalvan EDC
Lugalvan G 15 M
Lugalvan HS 1000
Lugalvan NES
Lugalvan RED
Lugalvan SOR
Lugalvan TC-BPC
Lugalvan U 20
Lugalvan U 35
Lugalvan U 500
