PRODUCTS

LUGALVAN IMZ

LUGALVAN IMZ is a water and alcohol soluble top brightener for zinc electroplating with a high concentration of >99.5%.
LUGALVAN IMZ is used to formulate brightener additives for the electroplating industry.

Molecular Formula: C3H4N2
Molar Mass (DIN 51405): 68.08 g/mol

Applications of LUGALVAN IMZ:
LUGALVAN IMZ is used to formulate brightener additives employed in the electroplating industry, especially in alkaline zinc electrolytes.
LUGALVAN IMZ can be caused to react with a wide variety of other substances.
LUGALVAN IMZ is employed at a concentration of 0.5 – 5 g/l.

Other Applications of LUGALVAN IMZ:
Metal Processing & Fabrication,
Electroplating.

Functions of LUGALVAN IMZ:
Electroplating Additive,
Electroplating Additive Metal Type Zinc,
Electroplating Additive Metal Type Tin,
Electroplating Additive Metal Type Medium Alkaline,
Electroplating Additive Metal Type Elektroplating Function Basic Brightener.

Other Functions of LUGALVAN IMZ:
Metal Processing & Fabrication,
Brighteners,
Electroplating,
Surfactant.

Features and Benefits of LUGALVAN IMZ:
Raw material copper electroplating.

Related End Markets of LUGALVAN IMZ:
Metal Processing & Fabrication,
Consumer Products,
Electronics,
General Industrial,
Transportation.

Related Substrates of LUGALVAN IMZ:
Metal Processing & Fabrication,
Non-Ferrous,
Zinc.

Solubility of LUGALVAN IMZ:
LUGALVAN IMZ is soluble in water and alcohols.

Safety of LUGALVAN IMZ:
We know of no ill effects that could have resulted from using LUGALVAN IMZ for the purpose for which LUGALVAN IMZ is intended and from processing it in accordance with current practice.
According to the experience we have gained over many years and other information at our disposal, LUGALVAN IMZ does not exert any harmful effects on health, provided that LUGALVAN IMZ is used properly, due attention is given to the precautions necessary for handling chemicals, and the information and advice given in our safety data sheet are observed.

Handling and Storage of LUGALVAN IMZ:

Precautions for safe handling:
Breathing must be protected when large quantities are decanted without local exhaust ventilation.

Protection against fire and explosion:
Dust can form an explosive mixture with air.

Conditions for safe storage, including any incompatibilities:
Segregate from acids and acid forming substances.

Suitable materials for containers:
Low density polyethylene (LDPE), glass, High density polyethylene (HDPE), Stove-lacquer RDL 16

Unsuitable materials for containers:
Aluminium, Galvanized carbon steel (Zinc), Lead-plated, Paper/Fibreboard, Carbon steel (Iron), tinned carbon steel (Tinplate).

Further information on storage conditions:
Containers should be stored tightly sealed in a dry place.

Storage Stability of LUGALVAN IMZ:
LUGALVAN IMZ has a shelf life of two years in LUGALVAN IMZ sealed original packaging.

Storage duration:
24 Months

From the data on storage duration in this safety data sheet no agreed statement regarding the warrantee of application properties can be deduced.

First-Aid Measures of LUGALVAN IMZ:

General advice:
First aid personnel should pay attention to their own safety.
If the patient is likely to become unconscious, place and transport in stable sideways position (recovery position).
Immediately remove contaminated clothing.

If inhaled:
Keep patient calm, remove to fresh air.
Assist in breathing if necessary.
Seek medical attention.

If on skin:
Wash affected areas thoroughly with soap and water.
Remove contaminated clothing.
If irritation develops, seek medical attention.

If in eyes:
In case of contact with the eyes, rinse immediately for at least 15 minutes with plenty of water.
Immediate medical attention required.

If swallowed:
Rinse mouth and then drink 200-300 ml of water.
Do not induce vomiting.
Immediate medical attention required.

Fire-Fighting Measures of LUGALVAN IMZ:

Suitable extinguishing media:
Water spray, dry powder, foam, carbon dioxide

Special hazards arising from the substance or mixture

Hazards during fire-fighting:
Carbon oxides, nitrogen oxides
The substances/groups of substances mentioned can be released in case of fire.

Advice for fire-fighters:

Protective equipment for fire-fighting:
Wear self-contained breathing apparatus and chemical-protective clothing.

Further information:
Collect contaminated extinguishing water separately, do not allow to reach sewage or effluent systems.

Accidental Release Measures of LUGALVAN IMZ:

Personal precautions, protective equipment and emergency procedures:
Use breathing apparatus if exposed to vapours/dust/aerosol.
Avoid contact with the skin, eyes and clothing.

Environmental precautions:
Discharge into the environment must be avoided.

Methods and material for containment and cleaning up:

For small amounts:
Pick up with suitable appliance and dispose of.

For large amounts:
Pick up with suitable appliance and dispose of.

Identifiers of LUGALVAN IMZ:
Molecular Formula: C3H4N2
Molar Mass (DIN 51405): 68.08 g/mol

Properties of LUGALVAN IMZ:
Form: powder, crystalline
Odour: amine-like
Odour threshold: not determined
Colour: colourless to yellowish
pH value: 10.5
Melting point: 88 - 90°C (DIN EN ISO 3146)
Boiling point: 256°C
Flash point: > 135°C
Flammability: Vapours are flammable.
Autoignition: 480 °C (DIN 51794)
SADT: Not a substance/mixture liable to self-decomposition according to GHS.
Vapour pressure: 0.003 mbar ( 20°C)
Density: 1,233 g/cm3 ( 20°C)
Bulk density: 500 - 700 kg/m3 (ISO 697)
Self-ignition temperature:
Based on its structural properties LUGALVAN IMZ is not classified as selfigniting.
Not self-igniting The value has not be determined because of the low risk of self-ignition in consequence of the low melting point.
Thermal decomposition: Stable up to boiling point.
Viscosity, dynamic: 2.696 mPa.s ( 100°C)
Viscosity, kinematic: not applicable, LUGALVAN IMZ is a solid

Physical form: Colourless or pale yellow flakes

Concentration: >99.5%
(BASF method, GC, % area under the curve)

Bulk density: 0.5–0.7 g/cm3 (ISO 697)

pH: 9 – 11 (ISO 976, 10 %, 23 °C)

The above information is correct at the time of going to press.
It does not necessarily form part of LUGALVAN IMZ specification.

A detailed product specification is available from your local BASF representative.

Specifications of LUGALVAN IMZ:
Physical Form: Colorless or Pale Yellow Flakes
Concentration: >99.5%
Bulk Density: 0.5–0.7 g/cm 3
pH: 9–11
Primary Chemistry: Imidazole

Other Descriptions of LUGALVAN IMZ:

Product Type:
Plating Chemicals

Chemistry:
Aromatic based plating chemical

Industries:
Metal Processing & Fabrication