Quick Search
CAS Number: 98-94-2
EC Number: 202-715-5
Molecular Formula: C8H17N
Molecular Weight: 127.23
LUPRAGEN N 100 is a liquid tertiary aliphatic amine.
LUPRAGEN N 100 is used mainly as a polyurethane catalyst.
LUPRAGEN N 100 main application is rigid foam (insulation).
LUPRAGEN N 100 acts as powerful gel catalyst.
Other fields of use are as catalyst for rubber (NBS, natural rubber, latex) and as fuel additive.
LUPRAGEN N 100 acts as a powerful gel catalyst and polyurethane catalyst.
LUPRAGEN N 100 main application is rigid foam (insulation) and spray foam.
LUPRAGEN N 100 is also used as catalyst for rubber such as NBS, natural rubber and latex.
LUPRAGEN N 100 is a colorless to yellow liquid, with an amine-like odor.
LUPRAGEN N 100 is also miscible with water in all proportions.
LUPRAGEN N 100 is a catalyst for isocyanate reactions.
Coatings technology for polyurethane resin production.
Uses of LUPRAGEN N 100:
LUPRAGEN N 100 is a special catalyst for rigid foam, especially fit for making up bicomponent system, don't needs to add organic tin in compounding materials, activity is moderate, performance is stable, adjustability is large, and LUPRAGEN N 100 can be kept over a long period of time.
If the appropriate amout of LCA-1 or LCA-3 is added in compounding materials producing large capacity refrigerator, the flow ability of the foaming can be improved.
LUPRAGEN N 100 dosage commonly used for rigid foam is as about 3% as that of polyether, other supplementary catalysts can also be added according to LUPRAGEN N 100 requirement.
LUPRAGEN N 100 smells of ammonia and bitterness, LUPRAGEN N 100 can irritate skin, has some toxic, so the protect articles must be worn during the manufacture.
LUPRAGEN N 100 is recommended for evaluation in a broad range of rigid foams.
A major application is insulation foams, including spray, slabstock, board laminate and refrigeration formulations.
LUPRAGEN N 100 is also used in rigid foam furniture frame and decorative parts manufacturing.
LUPRAGEN N 100 can be used alone without any tin catalyst, or used together with other catalysts depending on process and specific requirements.
LUPRAGEN N 100 is used as an intermediate for polyurethane plastic catalysts, rubber accelerators and synthetic fibers.
Intermediate used in Polyurethane catalysts and Additives for fuels and lubricants.
Mainly used as rigid polyurethane foam catalyst.
LUPRAGEN N 100 can be used in a wide range of rigid foams.
One of the main applications is insulating foam, including formulations for sprays, plates, laminates and refrigeration.
LUPRAGEN N 100 is also suitable for the manufacture of rigid foam furniture frames and decorative parts.
The catalyst is used in the hard foam product, and can be used alone as the main catalyst without adding organotin, and can also be supplemented with JD series catalysts according to the requirements of the process and products.
LUPRAGEN N 100 is also used as an intermediate for rubber accelerators and synthetic fibers.
Characteristics of LUPRAGEN N 100:
Catalyst can be chosen to favor the gelling or blowing reaction,
Can be used as the sole amine catalyst or in combination,
Low VOC options available,
Colorless options available,
“Non-formaldehyde” production route option available.
Properties of LUPRAGEN N 100:
Colorless to light yellow transparent liquid at room temperature, soluble in alcohol and ether solvents.
The solubility is strongly basic tertiary amine compounds, soluble in alcohol and ether solvents, insoluble in water.
Nature of LUPRAGEN N 100:
Colorless liquid, density 0.849G/cm3.
Freezing point <-77 ℃, boiling point 159 ℃, Flash Point (Open Cup) 43.
33 ℃, slightly soluble in water, can be mixed with alcohol, benzene, acetone.
Reactivity of LUPRAGEN N 100:
Reactive Group:
Amines, Phosphines, and Pyridines
Reactivity Alerts:
Highly Flammable
Reactivity Profile:
LUPRAGEN N 100 neutralizes acids in exothermic reactions to form salts plus water.
May be incompatible with isocyanates, halogenated organics, peroxides, phenols (acidic), epoxides, anhydrides, and acid halides.
Flammable gaseous hydrogen may be generated in combination with strong reducing agents, such as hydrides.
Autoignition Temperature:
215 °C
Storage Condition of LUPRAGEN N 100:
Store below +30°C.
Safety of LUPRAGEN N 100:
LUPRAGEN N 100 has ammonia and bitter taste, has a stimulating effect on the skin, low toxicity, wear protective masks and gloves during production and application, and rinse with plenty of water after accidental contact.
Packed in iron drum, 50kg/drum, 170kg/drum.
Class II flammable liquid, sealed and stored in a cool place, away from the fire heat source, fire transport.
First Aid of LUPRAGEN N 100:
Get medical attention.
Inhalation:
Remove from exposure area.
If the victim has trouble breathing, give oxygen.
If breathing has stopped, give articial respiration.
Eyes:
Flush eyes with water for at least 15 minutes.
Skin:
Remove contaminated clothing.
Flush affected areas with plenty of running water.
Fresh air, rest.
Half-upright position.
Artificial respiration may be needed.
Refer for medical attention.
First rinse with plenty of water for at least 15 minutes, then remove contaminated clothes and rinse again.
Refer for medical attention.
First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then refer for medical attention.
Fire Fighting of LUPRAGEN N 100:
Fire Extinguishing Agents: Carbon dioxide, dry chemical powder, polymer or alcohol foam.
Use water spray, powder, alcohol-resistant foam, carbon dioxide.
In case of fire:
Keep drums, etc., cool by spraying with water.
Isolation and Evacuation:
As an immediate precautionary measure, isolate spill or leak area for at least 50 meters (150 feet) in all directions.
SPILL: Increase, in the downwind direction, as necessary, the isolation distance shown above.
FIRE: If tank, rail car or tank truck is involved in a fire, ISOLATE for 800 meters (1/2 mile) in all directions.
Also, consider initial evacuation for 800 meters (1/2 mile) in all directions.
Nonfire Spill Response:
Fully encapsulating, vapor-protective clothing should be worn for spills and leaks with no fire.
ELIMINATE all ignition sources (no smoking, flares, sparks or flames in immediate area).
All equipment used when handling LUPRAGEN N 100 must be grounded.
Do not touch or walk through spilled material.
Stop leak if you can do LUPRAGEN N 100 without risk.
Prevent entry into waterways, sewers, basements or confined areas.
A vapor-suppressing foam may be used to reduce vapors.
Absorb with earth, sand or other non-combustible material and transfer to containers (except for Hydrazine).
Use clean, non-sparking tools to collect absorbed material.
LARGE SPILL: Dike far ahead of liquid spill for later disposal.
Water spray may reduce vapor, but may not prevent ignition in closed spaces.
Personal Protective Equipment:
Wear self-contained breathing apparatus, rubber boots, heavy rubber gloves.
If entering spill area, wear self-contained breathing apparatus and full protective clothing, including boots.
Explosive Limits and Potential:
Explosive limits, vol% in air: 3.6-19
Spillage Disposal:
Personal protection: filter respirator for organic gases and vapours adapted to the airborne concentration of the substance.
Collect leaking and spilled liquid in sealable containers as far as possible.
Carefully collect remainder.
Then store and dispose of according to local regulations.
Do NOT let this chemical enter the environment.
Identifiers of LUPRAGEN N 100:
CAS: 98-94-2
EINECS: 202-715-5
InChI: InChI=1/C8H17N/c1-9(2)8-6-4-3-5-7-8/h8H,3-7H2,1-2H3
InChIKey: SVYKKECYCPFKGB-UHFFFAOYSA-N
Typical Properties of LUPRAGEN N 100:
Density: 0.0305 - 0.0307 lb/in³
Melting Point: -76.0 °F
Boiling Point: 324 - 329 °F
Flash Point: 106 °F
Moisture Content: <= 0.25 %
Assay: >99%
Color: <20
Ignition Temperature: 215°C
Molecular Formula: C8H17N
Molar Mass: 127.23
Density: 0.849 g/mL at 25 °C (lit.)
Melting Point: -60 °C
Boling Point: 158-159 °C (lit.)
Flash Point: 108°F
Water Solubility: 10 g/L (20 ºC)
Solubility: 10 g/L (20°C)
Vapor Presure: 3.6 mm Hg ( 20 °C)
Appearance: Liquid
Color: Clear
BRN: 1919922
pKa: pK1:10.72(+1) (25°C)
PH: 12 (5g/l, H2O, 20℃)
Sensitive: Air Sensitive
Explosive Limit: 3.6-19%(V)
Refractive Index: n20/D 1.454(lit.)
Freezing point: <3-77 ℃
Boiling range (℃): 158 - 160
Specific gravity (D420): 0.8528 - 0.8606
Refractive index (ND20): 1.4541 - 1.4550
PSA: 3.2
XLogP3: 1.9
Appearance: LUPRAGEN N 100 is a colorless liquid with a musky ammonia odor. Less dense than water. (USCG, 1999)
Density: 0.8490 g/cm3 @ Temp: 20 °C
Melting Point: -60 °C
Boiling Point: 162-165 °C
Flash Point: 42.2°C c.c.
Refractive Index: 1.4525-1.4545
Water Solubility: 10 g/L (20 ºC)
Storage Conditions: Flammables area
Vapor Pressure: 3.6 mm Hg ( 20 °C)
Vapor Density: Relative vapour density (air = 1): 4.4
Toxicity: LD50 orally in Rabbit: 272 mg/kg LD50 dermal Rat > 400 mg/kg
Explosive limit: Explosive limits , vol% in air: 3.6-19
Henrys Law Constant: 2.35e-05 atm-m3/mole
Experimental Properties: DISTILLING RANGE 157-160 °C
Air and Water Reactions: Highly flammable. Water soluble.
Specifications of LUPRAGEN N 100:
Molecular Weight: 127.23
Exact Mass: 127.23
EC Number: 202-715-5
UNII: N1H19E7HTA
ICSC Number: 1444
NSC Number: 163904
UN Number:
2264DSSTox ID:
DTXSID9026633Color/Form:
WATER-WHITE LIQ
HScode: 29213010
Other Products:
4-Propylphenol
L-Tyrosine USP
Adipic Dihydrazide
Irbesartan
Boscalid
Fmoc-Gly-OH
Cyclopropanecarboxylic Acid
Enalapril maleate
Other LUPRAGEN Products:
LUPRAGEN API
LUPRAGEN DMI
LUPRAGEN N 101
LUPRAGEN N 103
LUPRAGEN N 105
LUPRAGEN N 106
LUPRAGEN N 107
LUPRAGEN N 201
LUPRAGEN N 203
LUPRAGEN N 205
LUPRAGEN N 206
LUPRAGEN N 400
LUPRAGEN N 500
LUPRAGEN N 600
LUPRAGEN N 700
Related Products of LUPRAGEN N 100:
Albendazole sulfoxide D3
Isopropylcyclohexane
Microcystine LW(1,1ml, 5µg/ml, Solution, Methanol)
Butylcyclohexane-n
1-Undecene
Synonyms of LUPRAGEN N 100:
DMCHA
N,N-Dimethylcyclohexylamine
N,N-Dimethylaminocyclohexan
N,N-Dimethylcyclohex
Cyclohexyldimethylamine
N-Cyclohexyldimethylamine
N,N-Dimethylcyclohexanamine
N,N-diMethylcyclohaxylaMine
N,N-Dimethylcyclohexylamine
n,n-dimethyl cyclohexylamine
Cyclohexanamine,N,N-dimethyl-
Cyclohexylamine,N,N-dimethyl-
Cyclohexylamine, N,N-dimethyl-
LUPRAGEN N100Dimethylcyclohexylamine)
N,N-Dimethylcyclohexylamine (LUPRAGEN N100)
N-CyclohexyldimethylamineDimethylaminocyclohexane
N,N-Dimethylcyclohexylamine,(Cyclohexyldimethylamine)
N,N-Dimethylcyclohexylamine, (Cyclohexyldimethylamine)
Cyclohexyldimethylamine
Cyclohexylamine
N,N-dimethyl- (6CI,7CI,8CI)
Y 12 (catalyst)
(Dimethylamino)cyclohexane
N,N-Dimethylcyclohexylamine
N-Cyclohexyldimethylamine
PC 8 catalyst
Wondamine DMCA
N-Cyclohexyl-N
N-dimethylamine
SFC
Polycat 8
PC CAT NP 33R
Desmorapid 726B
Y 12
PC 8
Dabco PC 8
KL 10
NSC 163904
Kao 10
Toyocat DMCH
Tegoamin DMCHA
Kaolizer 10, Niax C 8
Jeffcat DMCHA
PC CAT DMCHA
N,N-Dimethylcyclohexanamine
N,N-Dimethylaminocyclohexane
Wandamin DMCA
DY 8
