Quick Search
CAS Number: 109-02-4
EC Number: 203-640-0
Molecular Formula: C5H11NO
Molecular Weight: 101.147 g/mol
LUPRAGEN N 105 is a cyclic tertiary amine with an ether bond.
LUPRAGEN N 105 belongs to the group of gel catalysts for polyurethanes.
LUPRAGEN N 105 is used as catalyst ranging from rigid to flexible foams (i.e. slabstock polyester foams).
LUPRAGEN N 105 is also used as intermediate for fine chemicals, as solvent and base.
LUPRAGEN N 105 is the starting material for NMMO (N-Methylmorpholineoxide) that is a solvent for cellulose extraction.
LUPRAGEN N 105 is a cyclic tertiary amine with an ether bond.
LUPRAGEN N 105 acts as gel catalyst for polyurethanes.
LUPRAGEN N 105 increases solubility and promotes rise in rigid mold use.
LUPRAGEN N 105 is used in flexible or rigid foam applications (construction/furniture markets) as well as in microcellular applications (footwear, shoe sole market).
LUPRAGEN N 105 has a shelf life of 24 months.
LUPRAGEN N 105 is a colorless to yellow liquid with an amine-like odor.
LUPRAGEN N 105 is miscible in water.
Uses of LUPRAGEN N 105:
LUPRAGEN N 105 is soluble in water, alcohol, ether, can be used as a solvent for rayon, corrosion inhibitors, but also for the synthesis of rubber accelerators and other fine chemicals, also used as a polyurethane catalyst, catalysts for the synthesis of aminobenzylpenicillin and hydroxypenicillin.
LUPRAGEN N 105 oxide can be produced by double oxidation.
LUPRAGEN N 105 is mainly used as a solvent, Catalyst, corrosion inhibitor
LUPRAGEN N 105 is also used for rubber vulcanization accelerator and other fine chemicals synthesis, also used as polyurethane plastic foaming catalyst, catalysts for the synthesis of aminobenzylpenicillin and carboxy benzylpenicillin.
Can be produced by oxidation with hydrogen peroxide LUPRAGEN N 105.
Recently, with LUPRAGEN N 105 as solvent, a "new technology for preparing synthetic fiber by solvent" has been developed abroad, which will open up broad prospects for the application of LUPRAGEN N 105.
Applications of LUPRAGEN N 105:
Intermediate used in the production of Polyurethane catalyst, Initial product for chemical syntheses and Acid binder.
Main Industry of LUPRAGEN N 105:
Coatings,
Construction & Adhesives,
Nutrition & Health,
Plastics & Rubber,
Cleaning,
Agricultural Solutions,
Automobil & Industrial Fluids,
Packaging,
Personal Care,
Others.
Physical and Chemical Properties of LUPRAGEN N 105:
LUPRAGEN N 105 is liquid with corrosive properties, slight toxicity and pungent odor, colorless transparent liquid
Viscosity (23 ℃) 2.3mPa · s
Boiling range 111~117 ℃
Freezing point -65 ~-66 ℃
Refractive index (20 ℃) 1.4328~1.4337
Vapor pressure (20 ℃) 2200Pa
Solubility in water, pKa = 7.5.
Explosion limit of 2.2% ~ 11.8% in air, soluble in organic solvents, miscible with water and ethanol.
Characteristics of LUPRAGEN N 105:
Catalyst can be chosen to favor the gelling or blowing reaction,
Can be used as the sole amine catalyst or in combination,
Low VOC options available,
Colorless options available,
“Non-formaldehyde” production route option available.
Nature of LUPRAGEN N 105:
LUPRAGEN N 105 is colorless transparent liquid.
Has a special odor.
Melting Point -65 °c.
Boiling point 114 °c.
The relative density was 0.919.
Viscosity 0.90mPa.s(20 degrees C).
Vapor pressure (20 °c) 2.213kPa.
Soluble in organic solvents, miscible with water and ethanol.
Preparation Method of LUPRAGEN N 105:
Formaldehyde and then formic acid were slowly added dropwise to morpholine, and during the reaction, reflux was performed automatically, and CO2 was released.
Formic acid is added, heated and refluxed for 4-5 hours, then cooled, and immediately distilled by adding NaOH to collect all fractions before boiling point 99 °c, and then NaOH is added to the distillate until saturation, cooling, separation of the oil layer, drying, fractionation, collection of boiling point 114.5~117 C fraction is the finished product.
Safety of LUPRAGEN N 105:
When the drug is administered to an animal by any route, short-term excitation occurs, and then changes to inhibition and atrophy.
Inhalation of LUPRAGEN N 105 vapor, there are stimulation of the mucosa, so that animals appear spasm.
LUPRAGEN N 105 poisoning caused by the organization to change the liver, kidney malnutrition phenomenon.
Irritation of the skin as used as 1.5/2 of LUPRAGEN N 105.
The maximum allowable concentration in air is 5 mg/m3.
LUPRAGEN N 105 is toxic and has a stimulating effect on human skin and mucous membranes.
The production workshop should be well ventilated and the equipment should be closed.
The operator should wear protective gear.
Store in a cool, dry and ventilated place.
Light loading and light unloading should be carried out to avoid package breakage.
Identifiers of LUPRAGEN N 105:
Formula: C5H11NO
CAS: 109-02-4
Molecular Weight: 101.147 g/mol
CAS-RN: 109-02-4
EINECS: 203-640-0
Typical Properties of LUPRAGEN N 105:
Density: 0.0332 lb/in³
Melting Point: -85.0 °F
Boiling Point: 232 - 237 °F
Flash Point: 57.2 °F
Moisture Conten: <= 0.50 % DIN 51 777
Assay: >99%
Color: <50
Ignition Temperature: 165°C
InChI: InChI=1/C5H11NO/c1-6-2-4-7-5-3-6/h2-5H2,1H3/p+1
InChIKey: SJRJJKPEHAURKC-UHFFFAOYSA-N
Molecular Formula: C5H11NO
Molar Mass: 101.15
Density: 0.92g/mLat 25°C(lit.)
Melting Point: −66°C(lit.)
Boling Point: 115-116°C750mm Hg(lit.)
Flash Point: 75°F
Water Solubility: >500 g/L (20 ºC)
Vapor Presure: 18 mm Hg ( 20 °C)
Vapor Density: >1 (vs air)
Appearance: Liquid
Specific Gravity: 0.920 (20/4℃)
Color: Clear
Merck: 14,6277
BRN: 102719
pKa: 7.38(at 25℃)
PH: 10.6 (50g/l, H2O, 20℃)
Storage Condition: Store below +30°C.
Explosive Limit: 2.1%(V)
Refractive Index: n20/D 1.435(lit.)
Other LUPRAGEN Products:
LUPRAGEN API
LUPRAGEN DMI
LUPRAGEN N 100
LUPRAGEN N 101
LUPRAGEN N 103
LUPRAGEN N 106
LUPRAGEN N 107
LUPRAGEN N 201
LUPRAGEN N 203
LUPRAGEN N 205
LUPRAGEN N 206
LUPRAGEN N 400
LUPRAGEN N 500
LUPRAGEN N 600
LUPRAGEN N 700
Synonyms of LUPRAGEN N 105:
N-Methyl-tetrahydro-1,4-oxazin
N-Methylmorpholine
4-Methylmorpholine
4-methyl-morpholine
N-Methyl-morpholine
Morpholine, 4-methyl-
N-Methylmorpholine
1-Methylmorpholine
NMM
4-methyl-morpholinium
Morpholine, N-methyl-
4-Methyl-1-oxa-4-azacyclohexane
LUPRAGEN N 105
LUPRAGEN® N 105
NMM
AKOS 89985
LUPRAGEN(R) N 105
methyl morpholine
1-Methylmorpholine
4-METHYLMORPHOLINE
N-METHYLMORPHOLINE
4-methylmorpholine
N-Methylmorpholine
N-methyl morpholine
N-Methyl morphofine
4-methylmorpholin-4-ium
4-Methyl-1-oxa-4-azacyclohexane
4-METHYL-1-OXA-4-AZACYCLOHEXANE
4-methylmorpholine hydrochloride
