Quick Search
LUTENSOL ON 110 is nonionic surfactant.
LUTENSOL ON 110 is foam wetting agent, degreaser and emulsifier (100%).
LUTENSOL ON 110 is used in compositions for dishwashers, industrial and auto chemical goods, production of microemulsions.
CAS Number: 26183-52-8
LUTENSOL ON 110 is HLB 15.
LUTENSOL ON 110 is water soluble.
Uses of LUTENSOL ON 110:
LUTENSOL ON 110 is used in compositions for dishwashers, industrial and auto chemical goods, production of microemulsions.
Other Uses:
Wetting agents
Applications of LUTENSOL ON 110:
The LUTENSOL ON types belong to a group of nonionic surfactants that have established themselves in the detergents and cleaners industry, and in other branches of industry by virtue of the high levels of surface activity they display.
Their detergency and soil-dispersing capacity are also very pronounced, with the result that they perform particularly well in household, industrial and institutional laundry detergents.
Their high surface activity makes them particularly effective wetting agents for use in water and other polar liquids.
The LUTENSOL ON types perform particularly well in products that contain only small or moderate amounts of neutral salts or bases such as caustic alkalis, soluble carbonates, silicates and phosphates.
They also perform well in formulations that contain no inorganic substances.
Compatibility:
Because they are nonionic, the LUTENSOL ON types can be combined with anionic, cationic and nonionic surfactants and auxiliaries.
They are fully compatible with alkylaryl sulfonates (Lutensit A-LB types), ether sulfates and other sulfated and sulfonated products.
This enables synergistic effects and very high levels of performance to be obtained.
They are also compatible with Lutensit TC-KLC 50 (cationic biocides based on dimethyl fatty alkylbenzylammonium chloride) and with other nonionic surfactants such as our LUTENSOL A, AO, AT, TO, XP, XL and F types, and the low-foaming surfactants in our Plurafac LF and Pluronic PE and RPE ranges.
Their compatibility with dyes, pigments, protective colloids, thickeners and other substances with a molar mass in the upper range is also very good.
The versatility of the LUTENSOL ON types is such that they can be used to formulate acid, alkaline and neutral cleaners that satisfy the most varied requirements.
They are very effective emulsifiers in combination with Emulan and other products from the LUTENSOL range.
The LUTENSOL ON types with a low degree of ethoxylation have a spontaneous emulsifying effect, which is very useful in emulsion-type cleaners and cleaners that are applied cold.
Cleaners:
We recommend the following LUTENSOL types for the products listed below.
Household cleaners:
Dishwashing detergents and cleaners for floors, sanitary ware, tiles and enamel can be formulated with LUTENSOL ON 50, ON 60, ON 66, ON 70, ON 80 and ON 110 together with other LUTENSOL types, Lutensit A types, dispersing agents (Sokalan) and chelating agents (Trilon).
Neutral water-based cleaners:
The water-soluble products in the range – all except LUTENSOL ON 110 – perform particularly well in neutral cleaners in combination with anionic surfactants from our Lutensit range (especially Lutensit A-LB types), dispersing agents (Sokalan) and chelating agents (Trilon).
Alkaline water-based cleaners:
Cleaners of this type are used to clean metal before LUTENSOL ON types is plated, coated, phosphatized or anodized.
LUTENSOL ON 110, ON 66, ON 70, ON 80 and ON 110 perform best, in combination with Lutensit A-PS, other LUTENSOL types, dispersing agents (Sokalan) and chelating agents (Trilon).
Acid water-based cleaners:
LUTENSOL ON 50, ON 60, ON 66, ON 70, ON 80 and ON 110 are used in pickling solutions, degreasers, descalers and derusters based on hydrochloric, sulfuric, phosphoric or amidosulfonic acid.
Formulations also contain LUTENSOL FA 12, Lutensit TC-KLC 50 or Lutensit A-PS, and corrosion inhibitors such as Korantin BH.
Contract cleaning, disinfectants:
Disinfectants and cleaners for offices, etc., can be formulated with LUTENSOL ON 50, ON 60, ON 66, ON 70, ON 80 and ON 110, LUTENSOL A 8, FSA 10, FA 12, Lutensit TC-KLC 50 or Lutensit A-LB types, dispersing agents (Sokalan) and chelating agents (Trilon).
Solvent-based cleaners:
LUTENSOL ON 110 can be used alongside Emulan® A, P and PO to emulsify hydrocarbons such as mineral spirits, kerosene and diesel oil in solventbased cleaners that are applied cold.
Cleaners of this type are used to clean motor vehicles, engines, machine parts, road and rail tankers, etc., and to degrease metal.
Toilet cones:
Solid blocks and cones can be formulated with LUTENSOL ON types, Lutensit AT types, Pluriol® E 9000, dyes and fragrance.
Combinations of LUTENSOL ON types such as ON 30 and ON 110 can also be used.
Emulsification:
The LUTENSOL ON types with a low degree of ethoxylation are effective emulsifiers for some oils and solvents.
They can be combined with other emulsifiers from our Emulan range, and with alkali soaps, amine soaps and sulfonated oils.
Graduated tests are the most effective means of determining the best combination of emulsifiers and the amount required.
Tests are indispensable if emulsions are subjected to severe demands due to the presence of electrolytes, finely divided solids or water-soluble solvents.
Special emulsifier combinations often have to be employed to cope with exceptional thermal or mechanical stress.
LUTENSOL ON 110 is especially recommended for emulsifying spindle oil, machine oil, mineral spirits and kerosene in cleaners, drilling oils, rolling oils, drawing oils and mould-release agents.
LUTENSOL ON types may be used alone or in combination with other nonionic emulsifiers such as Emulan A, P and PO, anionic emulsifiers such as Korantin SH, and sulfonated oils and amine soaps.
Dispersing:
The dispersing capacity of surfactants, which plays an important part in cleaning and emulsification processes, is their single most important attribute if sparingly soluble solids have to be dispersed in water, polar solvents or mixtures of water and solvents.
The LUTENSOL ON types are effective dispersing agents in grinding and milling processes, and for dispersing the solids generated by precipitation, coagulation and other chemical reactions.
They can be used alone or in combination with protective colloids.
Wetting:
The LUTENSOL ON types are very effective wetting agents.
They can be employed in a variety of refining, mixing, impregnating and surface-treatment processes.
Again, graduated tests under practical conditions are the most effective means of determining the best products for specific applications.
Other Applications of LUTENSOL ON 110:
There are applications for the LUTENSOL ON types in the leather, paper, paints and building products industries.
Replacement products for alkylphenol ethoxylates (APEO):
In June 2003, the European Parliament published Directive 2003/53/EC which places restrictions on the marketing and use of certain dangerous substances and preparations (nonylphenol, noylphenol ethoxylates) in the Official Journal of the European Union.
This legislation entered into force on 17 January 2005 in response to demands to reduce the risks identified in the EU risk assesment of nonylphenol.
LUTENSOL ON types applies to all applications in which these products are discharged as effluent, and LUTENSOL ON types aim is to minimising the release of NP and NPEO into surface waters.
If effectively amounts to ban on these substances.
Functions of LUTENSOL ON 110:
Emulsifying
Emulsifier
Emulsifier Oil / Water
Oil / Water Paraffinic
Oil / Water Naphthenic
Oil / Water Aromatic
Oil / Water Triglyceride
Oil / Water Silicone
Emulsifier Dynamic Wetting fast
Surface Modification
Surface Modification Wetting Agent
Surface Modification Wetting Dynamics Fast
Foam Behavior Medium
Hydrophobic / Hydrophilic Modifier
Hydrophobic / Hydrophilic Modifier Modification Type Hydrophilization
Electroplating Additive Metal Type Elektroplating Function Surfactant / Wetting Agent
Features and Benefits of LUTENSOL ON 110:
Low toxicity
Chemical Nature of LUTENSOL ON 110:
The LUTENSOL ON types are nonionic surfactants.
They are alkyl polyethylene glycol ethers made from a saturated synthetic, short-chain fatty alcohol.
They conform to the following formula.
RO(CH2CH2O)xH
R = saturated, synthetic, short-chain fatty alcohol
x = 3, 5, 6, 6.5, 7, 8 or 11
The numeric code in LUTENSOL ON types name usually indicates the degree of ethoxylation.
The LUTENSOL ON types are manufactured by causing the fatty alcohol to react with ethylene oxide in stoichiometric proportions.
The ethoxylation temperature is kept as low as possible.
This, combined with the high purity of the feedstocks, ensures that high-performance products with low toxicity are obtained.
Properties of LUTENSOL ON 110:
LUTENSOL ON 30, ON 50, ON 60, ON 66, ON 70 and ON 80 are clear or cloudy, virtually colourless liquids.
LUTENSOL ON 110 is a soft, colourless paste.
The most important properties of the LUTENSOL ON types are shown in the table below.
The figures quoted are averages from representative batches of product.
Storage of LUTENSOL ON 110:
The LUTENSOL ON types should be stored indoors in their original packaging, which should be kept tightly sealed.
They are hygroscopic and readily soluble in water, with the result that they absorb moisture very quickly.
Drums must be resealed each time they are opened.
The storage temperature should not be allowed to fall substantially below 20°C, and storerooms must not be overheated.
The LUTENSOL ON types can become slightly cloudy if they are stored at low temperatures, but this has no effect on their performance.
This cloudiness can be dissipated by heating them to 20 – 30°C, or 50°C in the case of LUTENSOL ON 110.
Liquid that has solidified or that shows signs of precipitation should be heated to around 30°C (LUTENSOL ON 110 : 50°C) and rehomogenized before LUTENSOL ON types is processed.
Drums that have solidified or that have begun to precipitate should be reconstituted by gentle heating, preferably in a heating cabinet.
The temperature must not be allowed to exceed 60 °C.
This also applies if drums are heated by external electrical elements.
Internal electrical elements should not be used because of the localized anomalies in temperature that they cause.
The LUTENSOL ON types must be blanketed with nitrogen if they are stored in heated tanks (at 50 – 60°C) to prevent them from coming into contact with air.
Constant gentle stirring helps to prevent them being discoloured as a result of prolonged contact with electrical elements or external heating coils.
Materials:
The following materials can be used for tanks and drums.
AISI 304 stainless steel (X6CrNiTi1810)
AISI 316 stainless steel (X10CrNiMoTi1810)
Iron lined with a phenolic resin
Shelf life of LUTENSOL ON 110:
Provided they are stored properly and drums are kept tightly sealed, the LUTENSOL ON types have a shelf life of at least two years in their original packaging.
Safety of LUTENSOL ON 110:
We know of no ill effects that could have resulted from using LUTENSOL ON types for the purpose for which LUTENSOL ON types is intended and from processing it in accordance with current practices.
According to the experience that we have gained over many years and other information at our disposal, LUTENSOL ON types do not exert harmful effects on health, provided they are used properly, due attention is given to the precautions necessary for handling chemicals, and the information and advice given in our Safety Data Sheets are observed.
Handling of LUTENSOL ON 110:
Protect the eyes and avoid prolonged contact with the skin.
Safety glasses should be worn when handling these products in their undiluted form.
Biological Degradability of LUTENSOL ON 110:
These products fulfil the requirements of Regulation (EC) No 648/2004 on detergents, tested according to the methods listed in Annex III.
Further information on their ecological and toxicological properties can be found un the safety data sheets.
Typical Properties of LUTENSOL ON 110:
Product Type:
Polymers
Surfactants
Surfactant Type Nonionic
Surfactants Alcohol Source Petrochemical
Surfactants EO number 9-15
Surfactants HLB Value (Griffin) 14.5-16
Chemistry:
Alcohol alkoxylate
Other LUTENSOL Products:
LUTENSOL A 3 N
LUTENSOL A 65 N
LUTENSOL A 9 N
LUTENSOL A 12 N
LUTENSOL AO 3
LUTENSOL AO 5
LUTENSOL AO 7
LUTENSOL AO 11
LUTENSOL AT 18 20%
LUTENSOL AT 25 E
LUTENSOL AT 25 FLAKE
LUTENSOL AT 50 POWDER
LUTENSOL AT 50 FLAKES
LUTENSOL AT 80 POWDER
LUTENSOL FT LT 7
LUTENSOL LA 60
LUTENSOL ON 30
LUTENSOL ON 50
LUTENSOL ON 60
LUTENSOL ON 65
LUTENSOL ON 66
LUTENSOL ON 70
LUTENSOL ON 80
LUTENSOL TO 2
LUTENSOL TO 3
LUTENSOL TO 5
LUTENSOL TO 6
LUTENSOL TO 7
LUTENSOL TO 8
LUTENSOL TO 10
LUTENSOL TO 11
LUTENSOL TO 12
LUTENSOL TO 15
LUTENSOL TO 20
LUTENSOL TO 65
LUTENSOL TO 79
LUTENSOL TO 89
LUTENSOL TO 108
LUTENSOL TO 109
LUTENSOL TO 129
LUTENSOL TO 389
LUTENSOL XP 30
LUTENSOL XP 40
LUTENSOL XP 50
LUTENSOL XP 60
LUTENSOL XP 69
LUTENSOL XP 70
LUTENSOL XP 79
LUTENSOL XP 80
LUTESNOL XP 89
LUTENSOL XP 90
LUTENSOL XP 99
LUTENSOL XP 100
LUTENSOL XP 140
LUTENSOL XL 40
LUTENSOL XL 50
LUTENSOL XL 60
LUTENSOL XL 70
LUTENSOL XL 79
LUTENSOL XL 80
LUTENSOL XL 89
LUTENSOL XL 90
LUTENSOL XL 99
LUTENSOL XL 100
LUTENSOL XL 140
Synonyms of LUTENSOL ON 110:
Poly(oxy-1,2-ethanediyl),a-decyl-w-hydroxy-
AlkasurfDA 3
Biodac 39
Biodac 59
Blaunon EL 1303
C10E10
Cemulsol 860
Chemal DA 4
Conion N 100
Conion N 30
Conion N 60
DeSonic DA 4
DeSonic DA 6
Decanol E3
Deceth
Deceth 4
Deceth 6
Deceth 9
Decyl poly(oxyethylene) ether
Dehydol D3
Empilan KAS
Emulgin BL 309
Emulphogene DA 630
Enazol DE 4
Enazol ODE 4
Ethal DA 4
Ethal DA 6
Ethoxylated decanol
Ethoxylated decylalcohol
Findet10/15
Findet SE 2249
Finesurf D 1303
Finesurf D 1305
Finesurf D 1310
Finesurf EL 1303
H 1110
Iconol DA 4
Iconol DA 9
Ifralan X 1008L
Imbentin91/35
Imbentin AG 100/040
Imbentin E 100/100
KX-NS 12030
Karawet LOG
LD654-15
Lauropal 0205
lutensol ON 110
lutensol ON 50
lutensol XL 80
lutensol XL 90
Makon DA 4
Makon DA 6
Marlox K 158
Noigen SD 400
Noigen SD70
Noigen XL 1000
Noigen XL 160
Oxetal D 104
PEG decyl ether
Poly(oxyethylene) decyl ether
Poly(oxyethylene) monodecyl ether
Polyethyleneglycol 1-decanol monoether
Polyethylene glycol decyl ether
Polyethyleneglycol monodecyl ether
Polyethylene oxide decyl ether
Renex KB
SD 110
SD70
SXS
Sanmorin 11
Trycol 5950
Trycol 5953
Trycol 5956
Trycol DA 4
Trycol DA 6
XL 80
a-Decyl-w-hydroxy-poly(oxyethylene)
Poly(oxy-1,2-ethanediyl),a,a'-[[(9Z)-(1-oxo-9-octadecen-1-yl)imino]di-2,1-ethanediyl]bis[w-hydroxy-
Glycols,polyethylene, ether with (Z)-N,N-bis(2-hydroxyethyl)-9-octadecenamide (2:1)(8CI)
Poly(oxy-1,2-ethanediyl), a,a'-[[(9Z)-(1-oxo-9-octadecenyl)imino]di-2,1-ethanediyl]bis[w-hydroxy- (9CI)
Dionil OC
Dipoly(oxyethylene)oleamide
Ethomid O 12
Ethomid O 15
Ethomid O 17
lutensolFSA 10
Nikkol TAMDO 5
Oleic acid diethanolamide ethoxylate
Oleic aciddiethanolamide-ethylene oxide adduct
Poly(oxyethylene) oleoamide
Polyethyleneglycol ether with (Z)-N,N-bis(2-hydroxyethyl)-9-octadecenamide (2:1)
Polyethylene glycol oleic acid amide
TAMDO 10
TAMDO 15
TAMDO 5
Poly(oxy-1,2-ethanediyl),a-isodecyl-w-hydroxy-
CaflonDE 0600
Chemal DA 6
Chemal DA 9
Correctol SE
Emulphogene DA 530
Ethoxylated isodecyl alcohol
Ethylan CD 109
Finesurf D 45
Genapol ID 60
ID206
Iconol DA 6
Igepal DA 530
lutensol XP 89
lutensol XP 90
Marlipal013Ei
Naroacty ID 60
Nissan Nonion ID 206
Noigen SD 110
Noigen SD 150
Noigen SD 30
Noigen SD 300
Noigen SD 60
Noigen SD 80
Noigen SDX 60
NoigenXL 1000F
Noigen XL 140
Nonion ID 206
Polyethylene glycol isodecyl ether
Polyethylene glycol isodecyl monoether
Polyethylene glycol monoether withExxal 10
Polyethylene glycol monoisodecyl ether
Rhodasurf 860P
Rhodasurf DA530
Rhodasurf DA 630
Rhodasurf DA 630E
Rhodasurf DA 639
SDX 60
StepantexDA 6
Surfonic DA 6
Synperonic 10/11
Synperonic 10/5
Synperonic 10/7
Trend90
Trend 90EC
Trycol 5952
Trycol LF 1
