LUTENSOL ON 30

LUTENSOL ON 30 is nonionic surfactant.

LUTENSOL ON 30 is low foam emulsifier (HLB 9) and wetting agent.
LUTENSOL ON 30 has defoaming properties.

CAS Number: 78330-20-8

LUTENSOL ON 30 is used in CIP washing, dishwasher rinses and other non-foaming formulations.
LUTENSOL ON 30 is requires the use of a hydrotrope.
LUTENSOL ON 30 can be used in solvent based cleaners.

Benefits as a detergent:
LUTENSOL ON 30 is used for cleaning agents for the chemical industry.

Uses of LUTENSOL ON 30:
LUTENSOL ON 30 is a nonionic surfactant, 100% active, alkyl polyethylene glycol ether made from a saturated synthetic, short-chain fatty alcohol, with approximately 3 moles of Ethylene oxide. 
LUTENSOL ON 30 is a high-performance surfactant with low toxicity, great emulsification, dispersion, wetting and compatibilizing properties. 

LUTENSOL ON 30 is used for the following formulation types:
Emulsifier concentrates,
Emulsions (oil and water),
Suspension concentrates,
Microemulsions,
Oil dispersions,
Suspo-emulsions.

Other Uses of LUTENSOL ON 30:
Nonionic Surfactant, 
Emulsifier, 
Detergent, 
Dispersant,
Commercial Laundry,
Vehicle and Transportation Care

Applications of LUTENSOL ON 30:
The LUTENSOL ON types belong to a group of nonionic surfactants that have established themselves in the detergents and cleaners industry, and in other branches of industry by virtue of the high levels of surface activity they display. 
Their detergency and soil-dispersing capacity are also very pronounced, with the result that they perform particularly well in household, industrial and institutional laundry detergents.

Their high surface activity makes them particularly effective wetting agents for use in water and other polar liquids.
The LUTENSOL ON types perform particularly well in products that contain only small or moderate amounts of neutral salts or bases such as caustic alkalis, soluble carbonates, silicates and phosphates. 
They also perform well in formulations that contain no inorganic substances.

Compatibility: 
Because they are nonionic, the LUTENSOL ON types can be combined with anionic, cationic and nonionic surfactants and auxiliaries. 
They are fully compatible with alkylaryl sulfonates (Lutensit A-LB types), ether sulfates and other sulfated and sulfonated products. 

This enables synergistic effects and very high levels of performance to be obtained. 
They are also compatible with Lutensit TC-KLC 50 (cationic biocides based on dimethyl fatty alkylbenzylammonium chloride) and with other nonionic surfactants such as our LUTENSOL A, AO, AT, TO, XP, XL and F types, and the low-foaming surfactants in our Plurafac LF and Pluronic PE and RPE ranges. 

Their compatibility with dyes, pigments, protective colloids, thickeners and other substances with a molar mass in the upper range is also very good.
The versatility of the LUTENSOL ON types is such that they can be used to formulate acid, alkaline and neutral cleaners that satisfy the most varied requirements. 

They are very effective emulsifiers in combination with Emulan and other products from the LUTENSOL range.
The LUTENSOL ON types with a low degree of ethoxylation have a spontaneous emulsifying effect, which is very useful in emulsion-type cleaners and cleaners that are applied cold.

Cleaners:
We recommend the following LUTENSOL types for the products listed below.

Household cleaners: 
Dishwashing detergents and cleaners for floors, sanitary ware, tiles and enamel can be formulated with LUTENSOL ON 50, ON 60, ON 66, ON 70, ON 80 and ON 110 together with other LUTENSOL types, Lutensit A types, dispersing agents (Sokalan) and chelating agents (Trilon).

Neutral water-based cleaners: 
The water-soluble products in the range – all except LUTENSOL ON 30 – perform particularly well in neutral cleaners in combination with anionic surfactants from our Lutensit range (especially Lutensit A-LB types), dispersing agents (Sokalan) and chelating agents (Trilon).

Alkaline water-based cleaners:
Cleaners of this type are used to clean metal before LUTENSOL ON types is plated, coated, phosphatized or anodized. 
LUTENSOL ON 60, ON 66, ON 70, ON 80 and ON 110 perform best, in combination with Lutensit A-PS, other LUTENSOL types, dispersing agents (Sokalan) and chelating agents (Trilon).

Acid water-based cleaners:
LUTENSOL ON 50, ON 60, ON 66, ON 70, ON 80 and ON 110 are used in pickling solutions, degreasers, descalers and derusters based on hydrochloric, sulfuric, phosphoric or amidosulfonic acid. 
Formulations also contain LUTENSOL FA 12, Lutensit TC-KLC 50 or Lutensit A-PS, and corrosion inhibitors such as Korantin BH.

Contract cleaning, disinfectants:
Disinfectants and cleaners for offices, etc., can be formulated with LUTENSOL ON 50, ON 60, ON 66, ON 70, ON 80 and ON 110, LUTENSOL A 8, FSA 10, FA 12, Lutensit TC-KLC 50 or Lutensit A-LB types, dispersing agents (Sokalan) and chelating agents (Trilon).

Solvent-based cleaners:
LUTENSOL ON 30 can be used alongside Emulan® A, P and PO to emulsify hydrocarbons such as mineral spirits, kerosene and diesel oil in solventbased cleaners that are applied cold. 
Cleaners of this type are used to clean motor vehicles, engines, machine parts, road and rail tankers, etc., and to degrease metal.

Toilet cones:
Solid blocks and cones can be formulated with LUTENSOL ON types, Lutensit AT types, Pluriol® E 9000, dyes and fragrance. 
Combinations of LUTENSOL ON types such as ON 30 and ON 110 can also be used.

Emulsification:
The LUTENSOL ON types with a low degree of ethoxylation are effective emulsifiers for some oils and solvents.
They can be combined with other emulsifiers from our Emulan range, and with alkali soaps, amine soaps and sulfonated oils.

Graduated tests are the most effective means of determining the best combination of emulsifiers and the amount required. 
Tests are indispensable if emulsions are subjected to severe demands due to the presence of electrolytes, finely divided solids or water-soluble solvents. 

Special emulsifier combinations often have to be employed to cope with exceptional thermal or mechanical stress.
LUTENSOL ON 30 is especially recommended for emulsifying spindle oil, machine oil, mineral spirits and kerosene in cleaners, drilling oils, rolling oils, drawing oils and mould-release agents. 
LUTENSOL ON types may be used alone or in combination with other nonionic emulsifiers such as Emulan A, P and PO, anionic emulsifiers such as Korantin SH, and sulfonated oils and amine soaps.

Dispersing:
The dispersing capacity of surfactants, which plays an important part in cleaning and emulsification processes, is their single most important attribute if sparingly soluble solids have to be dispersed in water, polar solvents or mixtures of water and solvents. 
The LUTENSOL ON types are effective dispersing agents in grinding and milling processes, and for dispersing the solids generated by precipitation, coagulation and other chemical reactions. 
They can be used alone or in combination with protective colloids.

Wetting:
The LUTENSOL ON types are very effective wetting agents. 
They can be employed in a variety of refining, mixing, impregnating and surface-treatment processes.
Again, graduated tests under practical conditions are the most effective means of determining the best products for specific applications.

Other Applications of LUTENSOL ON 30: 
There are applications for the LUTENSOL ON types in the leather, paper, paints and building products industries.

Replacement products for alkylphenol ethoxylates (APEO):
In June 2003, the European Parliament published Directive 2003/53/EC which places restrictions on the marketing and use of certain dangerous substances and preparations (nonylphenol, noylphenol ethoxylates) in the Official Journal of the European Union. 
This legislation entered into force on 17 January 2005 in response to demands to reduce the risks identified in the EU risk assesment of nonylphenol. 

LUTENSOL ON types applies to all applications in which these products are discharged as effluent, and LUTENSOL ON types aim is to minimising the release of NP and NPEO into surface waters. 
If effectively amounts to ban on these substances.

Chemical Nature of LUTENSOL ON 30: 
The LUTENSOL ON types are nonionic surfactants. 
They are alkyl polyethylene glycol ethers made from a saturated synthetic, short-chain fatty alcohol. 

They conform to the following formula.
RO(CH2CH2O)xH

R = saturated, synthetic, short-chain fatty alcohol
x = 3, 5, 6, 6.5, 7, 8 or 11

The numeric code in LUTENSOL ON types name usually indicates the degree of ethoxylation.

The LUTENSOL ON types are manufactured by causing the fatty alcohol to react with ethylene oxide in stoichiometric proportions. 
The ethoxylation temperature is kept as low as possible. 
This, combined with the high purity of the feedstocks, ensures that high-performance products with low toxicity are obtained.

Properties of LUTENSOL ON 30:
LUTENSOL ON 30, ON 50, ON 60, ON 66, ON 70 and ON 80 are clear or cloudy, virtually colourless liquids. 

LUTENSOL ON 110 is a soft, colourless paste.

The most important properties of the LUTENSOL ON types are shown in the table below. 
The figures quoted are averages from representative batches of product.

Storage of LUTENSOL ON 30:
The LUTENSOL ON types should be stored indoors in their original packaging, which should be kept tightly sealed.

They are hygroscopic and readily soluble in water, with the result that they absorb moisture very quickly. 
Drums must be resealed each time they are opened.

The storage temperature should not be allowed to fall substantially below 20°C, and storerooms must not be overheated.

The LUTENSOL ON types can become slightly cloudy if they are stored at low temperatures, but this has no effect on their performance.
This cloudiness can be dissipated by heating them to 20 – 30°C, or 50°C in the case of LUTENSOL ON 110.

Liquid that has solidified or that shows signs of precipitation should be heated to around 30°C (LUTENSOL ON 110 : 50°C) and rehomogenized before LUTENSOL ON types is processed.

Drums that have solidified or that have begun to precipitate should be reconstituted by gentle heating, preferably in a heating cabinet. 
The temperature must not be allowed to exceed 60 °C. 

This also applies if drums are heated by external electrical elements.
Internal electrical elements should not be used because of the localized anomalies in temperature that they cause.

The LUTENSOL ON types must be blanketed with nitrogen if they are stored in heated tanks (at 50 – 60°C) to prevent them from coming into contact with air. 
Constant gentle stirring helps to prevent them being discoloured as a result of prolonged contact with electrical elements or external heating coils.

Materials: 

The following materials can be used for tanks and drums.
AISI 304 stainless steel (X6CrNiTi1810)
AISI 316 stainless steel (X10CrNiMoTi1810)
Iron lined with a phenolic resin

Shelf life of LUTENSOL ON 30: 
Provided they are stored properly and drums are kept tightly sealed, the LUTENSOL ON types have a shelf life of at least two years in their original packaging.

Safety of LUTENSOL ON 30:
We know of no ill effects that could have resulted from using LUTENSOL ON types for the purpose for which LUTENSOL ON types is intended and from processing it in accordance with current practices.
According to the experience that we have gained over many years and other information at our disposal, LUTENSOL ON types do not exert harmful effects on health, provided they are used properly, due attention is given to the precautions necessary for handling chemicals, and the information and advice given in our Safety Data Sheets are observed.

Handling of LUTENSOL ON 30:
Protect the eyes and avoid prolonged contact with the skin. 
Safety glasses should be worn when handling these products in their undiluted form.

Biological Degradability of LUTENSOL ON 30:
These products fulfil the requirements of Regulation (EC) No 648/2004 on detergents, tested according to the methods listed in Annex III. 
Further information on their ecological and toxicological properties can be found un the safety data sheets.

Identifiers of LUTENSOL ON 30:
Trade Name: LUTENSOL ON 30
Scientific name: 70-100% Alcohols, C9-11-iso-, C10-rich, ethoxylated.
CAS No.: 78330-20-8
Industry/Industry Name: Chemicals, Textile Aux.
Appearance: liquid
Packing size (kg.): 30 kg/pail, 190 kg/drum

Other Descriptions of LUTENSOL ON 30:

Product Groups:
Nonionic Surfactants

Sub Product Groups:
Alcohol Ethoxylates

Function:
Nonionic Surfactant

Form of Delivery:
Liquid

Chemical Description:
C10-Oxo alcohol + 3 EO

Product Suitabilities:
Suitable for EU Ecolabel

Certificates:
Care Chemicals: ISO 9001 (global)

Other LUTENSOL Products:
LUTENSOL A 3 N 
LUTENSOL A 65 N 
LUTENSOL A 9 N 
LUTENSOL A 12 N 
LUTENSOL AO 3
LUTENSOL AO 5
LUTENSOL AO 7
LUTENSOL AO 11
LUTENSOL AT 18 20%
LUTENSOL AT 25 E
LUTENSOL AT 25 FLAKE
LUTENSOL AT 50 POWDER
LUTENSOL AT 50 FLAKES
LUTENSOL AT 80 POWDER
LUTENSOL FT LT 7
LUTENSOL LA 60
LUTENSOL ON 50
LUTENSOL ON 60
LUTENSOL ON 70
LUTENSOL ON 80
LUTENSOL ON 110
LUTENSOL TO 2
LUTENSOL TO 3
LUTENSOL TO 5
LUTENSOL TO 6
LUTENSOL TO 7
LUTENSOL TO 8
LUTENSOL TO 10
LUTENSOL TO 11
LUTENSOL TO 12
LUTENSOL TO 15
LUTENSOL TO 20
LUTENSOL TO 65
LUTENSOL TO 79
LUTENSOL TO 89
LUTENSOL TO 108
LUTENSOL TO 109
LUTENSOL TO 129
LUTENSOL TO 389
LUTENSOL XP 30 
LUTENSOL XP 40 
LUTENSOL XP 50 
LUTENSOL XP 60 
LUTENSOL XP 69 
LUTENSOL XP 70 
LUTENSOL XP 79 
LUTENSOL XP 80 
LUTESNOL XP 89 
LUTENSOL XP 90 
LUTENSOL XP 99 
LUTENSOL XP 100 
LUTENSOL XP 140 
LUTENSOL XL 40 
LUTENSOL XL 50 
LUTENSOL XL 60 
LUTENSOL XL 70 
LUTENSOL XL 79 
LUTENSOL XL 80 
LUTENSOL XL 89 
LUTENSOL XL 90 
LUTENSOL XL 99 
LUTENSOL XL 100 
LUTENSOL XL 140

Names of LUTENSOL ON 30:

Regulatory process names:
Poly(oxy-1,2-ethanediyl), α-isodecyl-ω-hydroxy-
Poly(oxy-1,2-ethanediyl), α-isodecyl-ω-hydroxy-

IUPAC names:
2-(8-methylnonoxy)ethanol
Alcol isodecilico 7 OE
Fatty Alcohol ethoxylate
Fattyalcohol-ethoxylate
ISODECANOL, ETHOXYLATED
Isodecanol, ethoxylated
isodecanol, ethoxylated
Isodecanolo etossilato, 6 OE
Isodecylalcohol polyethoxylate
ISOTRIDECYLALCOHOL, ETHOXYLATED
NONION ID-203
poly oxy 1,2 ethanediyl alpha isodecyl omega hydroxy
Poly(oxy-1,2-ethanediyl) , .alpha.-isodecyl-.omega.-hydroxy
Poly(oxy-1,2-ethanediyl), .alpha.-isodecyl-.omega.-hydroxy-
Poly(oxy-1,2-ethanediyl), a-isodecyl-w-hydroxy-
Poly(oxy-1,2-ethanediyl), alpha-isodecyl-omega-hydroxy
Poly(oxy-1,2-ethanediyl), alpha-isodecyl-omega-hydroxy-
Poly(oxy-1,2-ethanediyl), α-isodecyl-.omega.-hydroxy-
Poly(oxy-1,2-ethanediyl), α-isodecyl-ω-hydroxy-
Poly(oxy-1,2-ethanediyl),a-isodecyl-w-hydroxy-
Poly(oxy-1,2-ethanediyl),a-isodecyl-w-hydroxy- (7 EO)
Polyethylene glycol monoisodecyl ether
polyoxyethylated (6) decyl alcohol
POLYOXYETHYLATED (6) ISODECYL ALCOHOL
POLYOXYETHYLENE ISODECYL ETHER
Polyoxyethylene isodecyl ether

Trade names:
Aquaflow NHS-350
ARBYL R CONC; 4,4-EO
Arbyl R KONZ.; 4,4-EO
BF 5583; 4,4-EO
BF 5658; 3-EO
Emulphogene DA 530
Ethylan CD 109
FA + 7 EO, Isodecyl; 7-EO
FA + 8 EO, Isodecyl; 8-EO
FA-C11-19 + EO-butylformal
Fettalkohol, C11-19 + EO-butylformal
FETTALKOHOLETHOXILAT; 7-EO
Igepal DA 530
Isoalkyl Polyglykolether C10 mit EO
Isoalkyl Polyglykolether C10 with EO
Isodecanol + EO
Isodecyl alcohol + 4.4 EO; 4,4-EO
ISODECYLALKOHOL + 4EO; 4-EO
Isodecylalkohol 4,4 EO; 4,4-EO
Isodecylalkohol-(4,4)-polyglycolether
IsoFAEO C10 + 11EO; 11-EO
IsoFAEO C10 + 3EO; 3-EO
IsoFAEO C10 + 4.4EO; 4,4-EO
IsoFAEO C10 + 4EO; 4-EO
IsoFAEO C10 + 5EO; 5-EO
IsoFAEO C10 + 6.2EO; 6,2-EO
IsoFAEO C10 + 6EO; 6-EO
IsoFAEO C10 + 7EO; 7-EO
IsoFAEO C10 + 8EO; 8-EO
isoFAEO C10 + nEO; n-EO
Lutensol 0N 70; 7-EO
Lutensol ON 110; 11-EO
Lutensol ON 30; 3-EO
Lutensol ON 50; 5-EO
Lutensol ON 60; 6-EO
LUTENSOL ON 65
LUTENSOL ON 66
Lutensol ON 70 D; 7-EO
Lutensol ON 70; 7-EO
LUTENSOL ON 80; 8-EO
Lutensol-ON-Butanol-Mischformal
OMC 824; 6,2-EO
Oxoalkohol, C11-19 + EO
Poly(oxy-1,2-ethandiyl), α-isodecyl-ω-hydroxy-
Poly(oxy-1,2-ethanediyl), alpha-isodecyl-omega-hydroxy-
Poly(oxy-1,2-ethanediyl), α-isodecyl-ω-hydroxy-
Polyethylene glycol isodecyl monoether
Polyethylene glycol monoisodecyl ether
Polyoxyethylene isodecyl ether
Rhodasurf DA 530
Rhodasurf DA 630
Trycol LF 1
ZÖ 5130-55; 6,2-EO
α-Isodécyl-ω-hydroxypoly(oxyéthylène)

Other names:
fafty alcohol ethoxylate
Poly(oxy-1,2-ethanediyl), .alpha.-isodecyl-.omega.-hydroxy-

Other identifier:
61827-42-7