MELMENT F 10

Synonyms:
Melment F 10; Melamine Superplasticizer; melamine; MELAMINE; 1,3,5-Triazine; 2,4,6-triamine, 108-78-1; Cyanuramide; Cyanurotriamide; Cyanurotriamine; Isomelamine; Theoharn; Teoharn; Triaminotriazine; Cyanuric triamide; Hicophor PR; s-Triazinetriamine; Aero; 2,4,6-Triamino-1,3,5-triazine; Yukamelamine; Pluragard; Cymel; Virset 656-4; 2,4,6-Triamino-s-triazine; Spinflam ML 94M; 2,4,6-Triaminotriazine; Pluragard C 133; ADK Stab ZS 27; Mark ZS 27; DG 002 (amine); Melamine Monomer; Melment F-10; Melment F; Melment; Melmente F-10; Melmente F 10; Melmente-F-10

Melment F 10

Description
Melamine Superplasticizer

Melment F 10
Technical Data Sheet
Chemical Nature 
Melment F 10 is free-flowing spray dried powder of a sulphonated polycondensation product based on melamine. Superplasticizer for cement and calcium sulphate based
materials.
Properties
Typical Properties Physical shape powder
Appearance characteristic, white to slightly colored
 Drying loss max. 4.0%
 Bulk density 500 – 800 kg/m³
 Dosage recommendation 0.20 – 2.00%
 by weight of cementitious materials
 pH value at 20 ˚C, 20% solution 9.0 – 11.4
Applications
Fields of application Melment® F 10 is especially optimized for plastification and water reduction of cement and calcium
sulphate based materials; including the following:
• Self-leveling underlayments (SLU)
• Feather edge products
• Cementitious floor screeds
• Dry-mix concrete
• Repair mortars
• Non-shrink grouts
• Cementitious self leveling floor screeds
• Tile adhesives and joint fillers
 Safety
General The usual safety precautions when handling chemicals must be observed. These include the
measures described in Federal, State and Local health and safety regulations, thorough ventilation
of the workplace, good skin care and wearing of protective goggles.
Material Safety Data Sheet All safety information is provided in the Material Safety Data Sheet for Melment F 10.
Transport Regulation Not known as a dangerous good according to transport regulations.

Product Description
Leveraging on our vast industrial experience, we offer an extensive range of Melamine Powder. This product is processed in conformity with international standards using certified chemical compounds with the help of highly advanced techniques. This product is meticulously tested by our vendors on well defined parameters to ensure its optimum quality, precise pH value and purity. Apart from this, we offer this product at industry leading rates within promised time-frame.

Features:
Precise pH value
Optimum quality
Purity

Fields of Application:
MELMENT F 10 is especially optimized for plastification and water reduction of cement based materials.
Self-levelling underlayments (SLU)
Feather-edge products
Non-shrink grouts
Cementitious floor screeds
Cementitious self-levelling floor screeds
Tiles adhesives and joint fillers
Repair mortars
Dry-mix concrete

Packaging:

25 kg paper bag

100 kg big bag

Melamine Superplasticizer

melment f10 similared superplasticizer

SMF Melamine Sulphonate Superplasticizer is a high range water reducing admixture. We are one of the best superplasticizer manufacturers in China.

SMF Melamine Sulphonate Superplasticizer is a free flowing, spray dried powder of  polycarboxylate resin. It's environment-friendly and widely applied to high performance concrete. It's dispersiveness is good, water reducing rate is high and adaptability to various cement.

Fluidity of ixtures is excellent when used in concrete and mortar. It's also an excellent dispersion plasticizer suitable for gypsum, ceramic and other mineral materials

Specification for Melamine Sulphonate Superplasticizer

Appearance

Light yellow powder

Solid content(%)

95Min

Density(Kg/m3)

500-600

Moisture (%)

5.0Max

Alkali content (%)

5.0Max

Cl content (%)

0.2Max

PH Value (1%Sol.)

8.0-9.5

3. Advantage for Melamine Sulphonate Superplasticizer

Advantage:of Polycarboxylate based superplasticizer

Lower dosage: high water reducing (25-40%), and cement save 15-30%.

Low slump loss: less than 20% during two hours.

Good compatibility: mix with many kinds of cements and admixtures.

Lower shrinkage: improve compression of fresh mixed concrete.

Low chloride and alkali content, no corrosion to rebar.

High stability: no precipitation at low temperature

Application
 4. Application for Melamine Sulphonate Superplasticizer

a. Long-distance transportation pump concrete

b. Compounding high durable concrete required impermeability, high ability of keeping collapse and frost-resistance

c. Compounding high flowing concrete, self-leveling grounds, fair-faced concrete and grouts materials, gypsum products

d. Compounding concrete with high dosage of flyash and mineral powder

MELMENT F10 is a melamine sulphonate based, powder form superplasticizer used in bagged manufacturing of powder products such as cement and gypsum.

Usage places

■ In construction chemicals industry, cement-based powder manufacturing,

■ In the construction chemicals industry, gypsum-based powder manufacturing,

■ Where liquid superplasticizer is difficult to transport,

■ It is used in the production of mold plaster in the industry.

Advantages

■ It increases the strength of powder products by reducing the mixing water.

■ Although it reduces the mixing water of powder products, it increases the processability.

■ It does not change the colors of powder-form products.

Liquid superplasticizer is obtained easily by mixing with water on site

■ In order to increase the workability and strength of the mixture, at the rate of 0.5 - 0.9 kg,

■ For leveling screeds and precast gypsum elements at a rate of 0.6 -1.5 kg,

■ It is used at the rate of 0.5-1.5 kg for plaster molds.

The dosage of use is determined based on laboratory experiments. BASF - YKS Technical Service should be consulted for detailed information.

Packaging

25 kg polletllen reinforced kraft bag Shelf Life

It is 24 months from the production date under appropriate storage conditions, in its original packaging. Opened packages must be used within one week under appropriate storage conditions.

Dosage

MELMENT F10 in 100 kg binder:

■ In the ratio of 0.2 - 0.4 kg to increase the processability of the mixture,

■ In order to increase the strength of the mixture, at the rate of 0.3 - 0.6 kg

Product description
MELMENT F10 is a powder form superplasticizer based on melamine sulphonate which is used in bagged manufacturing of powder products such as cement and plaster.

MELMENT® F 10
MELMENT F10 is a melamine sulphonate based, powder form superplasticizer used in bagged manufacturing of powder products such as cement and gypsum.

Usage places
In the construction chemicals industry, in cement-based powder manufacturing,
Construction chemicals industry, gypsum-based powder manufacturing,
Where liquid superplasticizer is difficult to transport,
It is used in the production of mold plaster in the industry.
Advantages
It increases the strength of powder products by reducing the mixing water.
Although it reduces the mixing water of powder products, it increases the processability.
It does not change the color of powder products.
A liquid superplasticizer is obtained easily mixed with water on site.
0.5 - 0.9 kg in order to increase the workability and strength of the mixture,
0.6 -1.5 kg for leveling screeds and precast gypsum elements,
It is used at the rate of 0.5-1.5 kg for plaster molds.
The dosage of use is determined based on laboratory experiments.
Packaging
25 kg polletllen reinforced kraft bag

Shelf life
It is 24 months from the production date under appropriate storage conditions, in its original packaging. Opened packages must be used within one week under appropriate storage conditions.

MELMENT F 10
MELMENT F 10 is a melamine sulphonate based, powder form superplasticizer that is used in the bagged manufacturing of powder products such as cement and plaster.

Placeholder
BASF-YKS MELMENT F 10
MELMENT F 10 is a melamine sulphonate based, powder form superplasticizer that is used in the bagged manufacturing of powder products such as cement and plaster.

Categories: Concrete Additives. Tags: BASF-YKS, concrete.
    
Explanation
Product description
Usage places
In the construction chemicals industry, cement-based powder manufacturing,
Construction chemicals industry, gypsum-based powder manufacturing,
Where liquid superplasticizer is difficult to transport,
It is used in the production of mold plaster in the industry.
Advantages
It increases the strength of powder products by reducing the mixing water.
Although it reduces the mixing water of powder products, it increases the workability.
It does not change the colors of powder-form products.
A liquid superplasticizer is obtained easily mixed with water on site.
Technicial Specifications
Structure of the Material Melamine Sulphonate based
Color White
Density 1.8 - 1.9 kg / liter

MELMENT® F 10
Definition
MELMENT® F 10, melamine sulphonate based, cement
and in the bagged manufacture of powder products such as plaster
It is a powder form superplasticizer used.
Usage places
Cement based in the construction chemicals industry
in powder manufacturing,
Gypsum-based powder in the construction chemicals industry
in manufacturing,
Liquid superplasticizer is difficult to transport
places,
It is used in the production of mold plaster in the industry.
Advantages
Powder products' strength by reducing the mixing water
increases.
Although powder products reduce the mixing water
It increases its workability.
It does not change the colors of powder productions.
Liquid can be easily mixed with water at the site.
superplasticizer is obtained.
Dosage
MELMENT® F 10 in 100 kg binder:
0.2 - 0.4 to increase the workability of the mixture
at the rate of kg,
0.3 - 0.6 kg to increase the strength of my mixture
at the rate of
Increasing the workability and strength of my mixture
0.5 - 0.9 kg for
For leveling flaps and precast plaster elements
At the rate of 0.6 - 1.5 kg,
It is used at the rate of 0.5 - 1.5 kg for plaster molds.
Usage depending on laboratory experiments
waist dosage