Quick Search
CAS NO.: 64787-97-9
EC/LİST NO.: 613-691-4
Melment F 10 is free-flowing spray dried powder of a sulphonated polycondensation product based on melamine.
Superplasticizer for cement and calcium sulphate based materials.
Physical shape powder
Appearance characteristic, white to slightly colored
Drying loss max. 4.0%
Bulk density 500 – 800 kg/m³
Dosage recommendation 0.20 – 2.00%
by weight of cementitious materials
pH value at 20 ˚C, 20% solution 9.0 – 11.4
Melment F 10 is especially optimized for plastification and water reduction of cement and calcium
sulphate based materials; including the following:
• Self-leveling underlayments (SLU)
• Feather edge products
• Cementitious floor screeds
• Dry-mix concrete
• Repair mortars
• Non-shrink grouts
• Cementitious self leveling floor screeds
• Tile adhesives and joint fillers
The usual safety precautions when handling chemicals must be observed.
These include the measures described in Federal, State and Local health and safety regulations, thorough ventilation of the workplace, good skin care and wearing of protective goggles.
MELMENT F10, melamine sulfonate, is a super flowing builder used in dusty productions such as normal and gypsum.
Usage places
In building designs, in powder based manufacturing,
In building designs, in original powder manufacturing,
Where liquid superplasticizer is difficult to transport,
Melment F 10 used in the production of molds in industry.
Advantages
Review their strength by reducing separation from dust.
Melment F 10 can be processed in a form that can be removed from dust.
Melment F 10 does not change the colors of powder-formed products.
Easily mixed with water at the construction site to obtain liquid superplasticizer
Processability and structure of the facility at the rate of 0.5 - 0.9 kg,
0.6 -1.5 kgs for leveling screeds and precast element,
0.5 -1.5 kg is used for plaster molds.
Melment F 10 used depending on laboratory experiments. For detailed information, BASF - YKS Technical Service should be consulted.
packaging
25 kg polyethylene reinforced kraft bag Shelf Life
24. Opened packages should be properly used for one week.
Dosage
For MELMENT F10,100 kg:
Within 0.2 - 0.4 kg for the workability of the mixture,
0.3 for 0.6 kg in the mixture,
MELMENT F 10 is an aerosol dried powder, a sulfonate polycondensation product of melamine.
Free flowing powder, very easy to use.
MELMENT F 10 has been specially optimized for plasticizing cement and plaster mixes and reducing the need for water.
usage areas
As powder:
Machine linings
Self-leveling floors
repair mortars
Solutions for injection into wells
Tile adhesives and fugues
Industrial plasters
Decorative plasters
Dental and medical cements
drywall and cement partitions
Roof tiles and fiber reinforced panels
After dissolving in water:
Raw materials for superplasticizer and concrete plasticizer formulations
Ready-to-use superplasticizer for concrete
By using an additive it is possible to reduce the mixing water of concrete and mortar mixtures by up to 30% while maintaining the original workability.
With this decrease in the amount of mixing water, the initial strengths increase up to twice the original value.
Likewise, the waterproofing and durability of the concrete will increase.
MELMENT L F10 is used in the production of precast concrete, prestressed concrete, monolithic concrete structures, lightweight concrete, industrial floors, repair materials and dry mortar and concrete mixtures.
• Melment F 10 enables the production of high-strength concrete from mixtures of liquid consistency with a relatively low dose of cement.
• Increases not only the strength of concrete, but also its waterproofing and resistance to climatic and chemical effects.
• If the liquefaction effect is used to reduce the mixing water, it increases the initial and final strength of the concrete.
This allows for more efficient use of molds and reduced TBU heating costs or reduced cement dosage.
• Melment F 10 improves the pumpability of the concrete mixture, which maintains its stickiness even in liquid consistency, without aggregate aggregation and water separation.
• Melment F 10 does not increase the amount of air in the mixture, it does not affect the ventilation provided by a suitable aerator additive.
• Melment F 10 non-flammable and physiologically harmless.
• Melment F 10 does not contain chloride and is suitable for reinforced concrete and prestressed concrete.
Use of the additive with other products
Polycarboxylate based water reducer powder, made by spray drying process, with fine comprehensive performance and environmental protective products.
Melment F 10 especially suitable for high-performance powder construction material, used as dispersant.
Good dispersion, high water reducing rate, adaptability to various cement.
Fluidity of mixtures is excellent when used in concrete and mortar.
Lower dosage: high water reducing rate 25-40%, save 15-30% of cement.
Low Slump loss: less than 20% during two hours, especially suitable for long-distance transport and pumping construction concrete.
Good compatibility: can be mixed with many kinds of cements and admixtures.
Lower shrinkage of concrete: can improve the compression of freshly mixed concrete.
Low chloride and alkali content, no corrosion to steel-bar.
High stability: no precipitation at low temperature.
Compounding long-distance transportation pump concrete.
Compounding normal concrete, high-performance concrete, high-strength concrete and ultra-high strength concrete.
Compounding high durable concrete which has impermeability, high ability of keeping collapse and frost-resistance.
Compounding high-performance and high flowing concrete, self-leveling grounds, air-faced concrete and grouts materials, gypsum products.
Compounding concrete which has high dosage of flyash and mineral powder.
MELMENT F 10 - super plasticizer is a bright white powder and is intended for the production of WHITE cement and mortars based on plaster, Portland cement, alumina cement.
Melment is used in the production of precast elements of prestressed concrete, industrial floors, monolithic concrete structures, renovation materials and dry mortar.
several times increase in the fluidity of concrete and mortar mixtures with a constant W / T ratio;
reducing the water demand of the mixture by 30-40% to achieve the same mobility of the solution;
increases the portability of the concrete mix;
does not increase the air content in the mixture, does not affect air entrainment as a result of the use of air-entraining additives;
an increase in the ultimate strength, density and homogeneity of the hardened stone;
increases water resistance, resistance of concrete to climatic influences;
reduction of shrinkage;
full compatibility with stabilizer Starvis 3003 F;
Melment F 10 does not contain chloride and is suitable for reinforced concrete and prestressed concrete.
During the production of dry mixes, Melment F 10 is added after premixing with cement.
The recommended dosage is 0.2-1.5% of the weight of cement used.
This dossier on Melment F 10, formaldehyde, sodium bisulfite polymer presents the most critical studies pertinent to the risk assessment of melamine, formaldehyde, sodium bisulfite polymer in its use as a cement additive chemical.
Melment F 10 does not represent an exhaustive or critical review of all available data.
Where possible, study quality was evaluated using the Klimisch scoring system .
Screening Assessment Conclusion – Melamine, formaldehyde, sodium bisulfite polymer is a polymer of low concern.
Therefore, Melment F 10 classified as a tier 1 chemical and requires a hazard assessment only.
Melment F 10, formaldehyde, sodium bisulfite polymer is used as a cement additive in the drilling process.
As a polymer the substance is not expected to bioconcentrate, bioaccumulate or sorb substantially to soils or sediments.
Melment F 10 not expected to degrade in the environment.
Furthermore, it is expected to be of relatively low toxicity to environmental receptors.
Thus, the substance is considered a polymer of low concern by NICNAS in an IMAP Tier 1 assessment.
Chemical composition: Melment F 10 is a sulfonated melamine-based polycondensation powder obtained by spray drying.
Technical data: form - white powder; bulk density - 450–750 g / l; heating loss - max. 4.0 wt%; 20% solution at 20 deg.
С has pH = 9.0-11.4
Superplasticizer Melment F 10 - optimized for plasticizing and reducing water consumption for mixtures based on cement and gypsum.
Dosage
0.2-1.5 wt.% By weight of the binder.
0.05-0.10 wt% based on the weight of the binder (when used as a dispersant).
Application area
Powdered:
self-leveling coatings;
liquid mortar for mechanized use;
repair mortar;
volumetric mortar;
tile adhesives and joint fillers;
molded and industrial plaster;
finishing plaster;
medical and dental solutions;
plasterboards and partitions;
ceiling tiles and panels.
After dissolving in water:
component for superplasticizing concrete;
ready-to-use concrete superplasticizer.
Superplasticizer Melment F 10 - optimized for plasticizing and reducing water consumption for mixtures based on cement and gypsum.
Package
25 kg bags on pallets. 40 bags per pallet.
Stored in its own sealed packaging in a cool, dry place.
Melment F 10 (CAS 64787-97-9) Market Research Report 2021 presents comprehensive data on Melamine-formaldehyde-sodium sulfite copolymer markets globally and regionally
The report includes Melment F 10 description, covers its application areas and related patterns.
It overviews Melment F 10 market, names Melamine-formaldehyde-sodium sulfite copolymer producers and indicates its suppliers.
Besides, the report provides Melment F 10 prices in regional markets.
In addition to the above the report determines Melamine-formaldehyde-sodium sulfite copolymer consumers in the market.
BAC Reports offers its clients in-depth market research of chemical industry products on the global and regional markets
We can analyze the following elements for each chemical product in any country or region:
capacities and production
consumption volume and structure
market price trends
exports and imports
existing technologies
feedstock market condition
market news digest
market forecast.
IUPAC names:
SULFUROUS ACID, SODIUM SALT (1:1), POLYMER WITH FORMALDEHYDE AND 1,3,5-TRIAZINE-2,4,6-TRIAMINE
Sulfurous acid, sodium salt (1:1), polymer with formaldehyde and 1,3,5-triazine-2,4,6-triamine
Synonyms:
64787-97-9
91829-64-0
SODIUM FORMALDEHYDE MELAMINE BISULFITE
