MERGAL K10N

MERGAL K10N is an industrial BIT ( 1,2-benzisothiazoline-3-one) based preservative used to prevent deterioration and degradation caused by bacteria in aqueous systems. 
MERGAL K10N provides long-term wet-state (in-can) preservation. 
MERGAL K10N offer excellent stability and compatibility even with difficult formulations/systems.

MERGAL K10N is a VOC-free, liquid bactericide/fungicide and industrial preservative. 
MERGAL K10N is a non-skin sensitizing benzothiazolinone formulation. 

MERGAL K10N is used to prevent deterioration and degradation caused by bacteria and fungi in aqueous systems. 
MERGAL K10N is used in waterborne paints, stucco/masonry-, EIFS-, and other coating products where water is a component.

MERGAL K10N is a non-skin sensitizing BIT (Benzisothiazolinone) formulation. 
MERGAL K10N is an industrial preservative used to prevent deterioration and degradation caused by bacteria and fungi in aqueous systems.

MERGAL K10N is a VOC-free, liquid bactericide/ in-package fungicide and industrial preservative. 
MERGAL K10N is a low viscosity solution free of solvents, surfactant and is convenient to handle year-round. 

MERGAL K10N provides heat stability to 100°C. 
MERGAL K10N is applicable to products with a range of pH 3–13. 

MERGAL K10N offers good compatibility with latex polymers. 
MERGAL K10N is used to prevent deterioration and degradation caused by bacteria and fungi in aqueous systems. 

This grade is suitable for waterborne adhesives and sealants. 
Recommended dosage level of MERGAL K10N is 0.05-0.4 %wt.

MERGAL K10N is a non-skin-sensitive formulation of benzisothiazolinone.
MERGAL K10N is a liquid VOC free bactericide / fungicide.

MERGAL K10N acts as an in-box preservative for the control of bacteria, yeast and fungi.
MERGAL K10N is used in water-based paints, plaster/wall coatings, EIFS coatings and other coating products where water is a component.

MERGAL K10N is a VOC-free benzoisothiazolinone compound primarily used for in-can preservation.
MERGAL K10N is a non-sensitizing BIT (Benzisothiazolinone) formulation.
MERGAL K10N is an industrial preservative used to prevent deterioration and deterioration caused by bacteria and fungi in aqueous systems.

MERGAL K10 N is an industrial BIT (1,2-benzisothiazolin-3-one) based preservative used to prevent bacterial degradation and degradation in aqueous systems.

Active Ingredient - % Weight:
1,2-Benzisothiazolin-3(2H)-one - 9.5%
Inert Ingredients - 90.5%
Total - 100.0%

Instructions For Use of MERGAL K10N:
MERGAL K10N is against Federal Law to use this product against MERGAL K10N label.
MERGAL K10N is an industrial preservative used to prevent spoilage and degradation caused by bacteria and fungi in aqueous systems.

MERGAL K10N is suitable for a wide variety of conditions and can be used at pHs of 3-13.
Because MERGAL K10N contains no organic solvents, MERGAL K10N is particularly suitable for applications where VOC is important.
MERGAL K10N can be added at any stage of production, but MERGAL K10N is recommended to add it to water at the beginning of the process.

Note: Strong oxidizing agents such as peroxides can inactivate MERGAL K10N.
Usage rates are given, but laboratory/field trials are recommended to determine the optimal usage rate within the range specified on this label.

For Polymer Emulsions and Dispersions, Coatings, Coatings, Mastics, Adhesives, Mineral and Pigment Slurries, Oil-Water Emulsions, Spin Finish Solutions for the Textile Industries, Inks, Metalworking Fluids, Thickeners, Joint Cements, Paints and Plasters:
Use 0.05 - 0.5% by weight MERGAL K10N based on the total weight of the final formulation.

MERGAL K10N is a VOC-free, water-based preservative to prevent spoilage and deterioration caused by bacteria and fungi.
For use in water-based adhesives, sealants and pigment slurries.

MERGAL K10N is useful for body and glaze in ceramics.
This low viscosity solution is solvent and surfactant free and suitable for year-round use.
Include as early in production as possible.

Typical Dose: 0.05 wt. % - 0.4 wt. % (in-pack protection)
Applicable to products with PH range 3 - 13
MERGAL K10N is heat resistant up to 100°C.

Other MERGAL products:
MERGAL 743
MERGAL BIT20
MERGAL K20
MERGAL 753
MERGAL K9N
MERGAL K14
MERGAL MV1,5
MERGAL 758
MERGAL KM102
MERGAL K101A
MERGAL K6N
MERGAL V615
MERGAL 786
MERGAL 711K6
MERGAL V698K4
MERGAL KM80
MERGAL KMP
MERGAL K12N
MERGAL K2N

Synonyms of MERGAL K10N:
1,2-Benzizotiyazol-3 (2H) -one
2634-33-5
1,2-Benzisothiazolin-3-on
1,2-benzotiyazol-3-on
benzizotiyazolon
Benzo [d] izotiyazol-3 (2H) -one
benzizotiyazolinon
Benzo [d] izotiyazol-3-on
Proxel
1,2-Benzizotiyazolin-3-on
Proxel PL
1,2-BENZISOTHIAZOL-3-ONE
1,2-benzizotiyazolinon
Nipacide BIT
Proxel AB
Benzo [d] izotiyazol-3-ol
2,3-dihidro-1,2-benzotiyazol-3-on
Proxel XL 2
benzoizotiyazol-3-on
1,2-benzoizotiyazolin-3-on
1,2-Benzizotiyazolon
Caswell No. 079A
Caswell No. 513A
C7H5NOS
UNII-HRA0F1A4R3
CCRIS 6369
3-Hidroksi-1,2-benzizotiyazol
IPX
CHEBI: 167099
EINECS 220-120-9
EPA Pestisit Kimyasal Kodu 098901
HRA0F1A4R3
1,2-Benzoisothiazoline-3-one
2,3-dihidro-3-okso-1,2-benzizotiyazol
MLS-0254244.0001
Benzo (d) izotiyazol-3 (2H) -one
Benzisothiazolin-3-on
Benzocil
Acticide BIT
Canguard BIT
Denicide BIT
Proxel BD
Proxel CF
Proxel TN
Proxel XL
Proxel BDN
Proxel GXL
Proxel Ultra 5
San-aibac AP
Proxel LV-S
Proxel Basın Yapıştır
Apizas AP-DS
Acticide BW 20
Bestcide 200K
Nipacide BIT 20
Parmetol B 70
Parmetol D 11
Proxel GXL (S)
Proxel HL 2
Nuosept 485
Nuosept 491
Nuosept 495
Topcide 600
XBINX
Denicide BIT 20N
Koralone B 119
Nipacide BIT 10W
Preventol BIT 20D
Proxel BD 20
Proxel Basın Yapıştır D
Troysan 1050
Bioban BIT 20DPG
1,2-benzizotiyazol-3 (2h) -on
benzizotiyazolin-3-on
Canguard BIT 20DPG
SD 202 (bakterisit)
Canguard Ultra BIT 20LE
1,2-Benzoisothiazol-3-on
BIT 10W
BIT 20
2-Tiyobenzimid
2,3-Dihidrobenzisothiazol-3-on
SD 202
1,2-Benzotiyazolinon
PubChem15685
Benzizotiyazolon (BİT)
ACMC-209u7v
Benzizotiyazol-3 (2H) -bir
1,2-BIT
1,2-BENZİZOTAZOL-3 (2H) -ONE
1,2-Benzizotiyazol-3 (2H) -one,% 97