METHYLENE BIS MORPHOLINE

N,N'-Methylene-bis-morpholine, metilen bis morfolin, metilenbismorfolin,metilen bismorpholine, MBM, Metal işleme sıvısı için biyosit, bakterisit, fungusit,CAS    5625-90-1
N,N'-Methylene-bis-morpholine by Ataman is used in metalworking fluid compositions as preservative / biocide

N,N-Dimorpholinomethane; Morpholine,4,4-methylenebis-; Bis(4-morpholinyl)methane; N,N'-Methylenebismorpholine; 
4,4'-methanediyldimorpholine; 4,4-methylenebis-Morpholine; N,N-Methylene-bis-morpholine;    N,N'-DIMORPHOLINOMETHANE;
 4,4'-methylenedi-morpholin; 4,4'-methylenedimorpholine; bis(morpholino-)methan; bismorpholinomethane; N,N'-Methylenebismorpholine; 
N,N'-DIMORPHOLINOMETHANE; 4,4’-methylenedi-morpholin; 4,4’-methylenedimorpholine; bis(morpholino-)methan; bismorpholinomethane; N,N’-Methylenebismorpholine;
 DIMORPHOLINOMETHANE; DIMORPHOLINOMETHONE;N,N'-Dimorpholinomethane;;N,N´-Methylene bismorpholine;Bis (morpholino-) methan; Bismorpholino methane; 
4,4-Methylenedimorpholine; Morpholine, 4,4-methylenedi-
DIMORPHOLINOMETHANE; DIMORPHOLINOMETHONE
cas no : 5625-90-1

N,N'-Methylene-bis-morpholine helps to increase the life of metalworking fluid with maintaining the stable product function and preserving the fluid from bacteria and fungi. 
It could be for metalworking fluid concentrate during manufacturing or for tank side treatment.
Name: N,N'-Methylene-bis-morpholine
CAS: 5625-90-1
N,N'-Methylene-bis-morpholine - CAS 5625-90-1 
Molecular Formula: C9H18N2O2
Molecular Weight: 186.251

Name    N,N'-Methylene-bis-morpholine
Synonyms    N,N-Dimorpholinomethane
Morpholine,4,4-methylenebis-
Bis(4-morpholinyl)methane
N,N'-Methylenebismorpholine
4,4'-methanediyldimorpholine
4,4-methylenebis-Morpholine
CAS    5625-90-1
EINECS    227-062-3

N,N'-Methylene-bis-morpholine - Physico-chemical Properties
Molecular Formula    C9H18N2O2
Molar Mass    186.251 g/mol
Density    1.09g/cm3
Boling Point    265.1°C at 760 mmHg
Flash Point    77.6°C
Vapor Presure    0.00935mmHg at 25°C
Refractive Index    1.496

1.Product name:N,N'-Methylene-bis-morpholine
2.Molecular weight:186.25
   Molecular formula:C9H18N2O2
3.CAS No:5625-90-1
   Eiencs No:227-062-3
4.Specification

Item

Index

Purity of Active Content

>92%

Appearance

Colorless liquid

Density

1.08-1.10g/m³

Boiling point ℃

122-124(P=12torr)

PH(1% water)

9.0-11.0

Solubility in Water

Completely

Usage of MBM ( Methylene-bis-morpholine) :
1, a low toxicity broad spectrum fungicide for water-based metalworking fluid
2, anti-Bacteria and fungi effectively
3, fully meet with the requirements of water-based metalworking fluid: low skin irritation, mild odor, low
toxicity; formulation compatibility, lasting bactericidal. At higher concentrations, fungi and molds also
have better inhibition.Recommended addition amount (mass ratio): Recipe 2-3%, the working liquid 1-2‰;
6.Package:  25kg/ drums or 200kg/ drums

Application and Benefits of Methylene-bis-morpholine : Biocide ( Preservative ) in the the metal working fluid composition permits the efficient practice of cutting, grinding, form rolling, press working and plastic
 working of metallic materials. In addition, the fluid composition is excellent in the antiseptic properties and it is seldom that the fluid composition 
adversely affects the environment of the earth and the human bodies. The fluid composition comprises a morpholine compound,the fluid composition is significantly improved in the
 antiseptic properties and the service life of the metal working fluid composition can thus significantly be extended, as compared with conventionally known metal working fluid
compositions. As a result, the fluid composition would permit the saving of natural resources, and the reduction of the amount of waste matter (waste fluid) and accordingly,
 the use thereof would result in the reduction of any adverse effect on the environment of the earth.

NO MORE FORMALDEHYDE !!
Formaldehyde occurs naturally in the environment as a
by-product of metabolic processes in humans, animals and
through the natural decay process of plant species.
Formaldehyde is even detectable in human breath at low
levels. Under the changes planned to the labelling of
certain chemicals, formalin-releasing species have been
re-classified according to their total potential to release
formaldehyde and not through actual measurement in use.
Research by several chemical manufacturers supports very
low levels, no higher than the surrounding environment,
when used well managed metalworking fluid systems.
Formaldehyde has long been classed as a category 1B
carcinogen. Formaldehyde Depots or ‘donors’ (FADs) have
been used to improve the sump life of soluble metalworking
fluids.
New legislation now affects certain formalin- containing
biocides. Under the recent update to CLP regulation, ATP
(Adaptation to Technical Progress, review May 4th 2017),
any product or treated article which contains certain formalin-containing biocides (to protect the function of the
product) will need to be labelled as category 1B. Examples
of the biocides affected include methylene bis-morpholine
(MBM) and methylene bis[5-methyloxazolidine] (MBO).

Methylene bis-morpholine (MBM) is a low toxicity biocide developed for use in metal working concentrates. Nipacide MBM is effective against a wide range of microorganisms including
 gram positive and gram negative bacteria, yeast and fungi. Microorganisms grow at a rapid rate and without use of the correct biocide, numbers can increase dramatically.

Methylene bis-morpholine (MBM)is recommended for preservation of metal working solution concentrates. N,N'-Methylene-bis-morpholine is effective against a wide range of spoilage 
organisms and effective over a wide pH and temperature range.

Use level;
Methylene bis morpholine should be evaluated in finished products at levels between 2.0% and 5.0%.