CAS NUMBER: 60828-78-6
EC NUMBER: 205-592-6
Metolat P 871 is a blend of glycols with an inorganic carrier.
Metolat P 871 reduces the shrinkage in cementitious systems and acts as coalescent in powder paints.
Metolat P 871 is recommended for the use in dry mixtures which are to be blended or diluted with water prior to application.
Metolat P 871 reduces the shrinkage in cementitious systems and acts as coalescent in powder paints.
Metolat P 871 ranges of products are powder based products with various functions including defoaming, anti-shrinkage and pigment dispersion/particle wetting.
Metolat P 871s are primarily targeted at dry blend applications in the construction industry for gypsum, mineral and cementitious compounds.
Metolat P 871 is slightly hygroscopic, and organic components will slowly evaporate at high temperatures.
Metolat P 871 will be better if stored at 15~25℃ (ie room temperature).
Metolat P 871 has a shelf life of 12 months from the date of manufacture in airtight containers.
Metolat P 871 is water soluble ester in a mixture of water and propylene glycol.
Metolat P 871 acts as a wetting and leveling agent.
Metolat P 871 is anionic and silicone-free.
Metolat P 871 is effective in hard or soft water up to 100°C and over a wide pH range. Used in overprint varnishes.
Metolat P 871 is an APEO free wetting agent in powder form.
Metolat P 871 is added to dry blends, which are dissolved in water before application.
The addition of Metolat P 871 results in an accelerated wetting of all solid particles, including sand, cement and fibres.
This results in a more homogeneous mixture of the mass and a more uniform aspect of the surface after drying.
In pigmented systems Metolat P 871 leads to a faster wetting of the pigment surface and prevents reagglomeration.
Colour strength is increased and the pigment can be used more efficiently.
Metolat P 871 improves the homogeneous distribution of the pigments and prevents their floading to the surface.
In powder paints the use of METOLAT P 588 prevents rub-out effects.
Metolat P 871 also prevents efflorescence.
Due to its specific composition, Metolat P 871 can be either used as wetting agent or as defoamer.
In aqueous, alkaline systems Metolat P 871 is used as wetting agent.
Metolat P 871 also improves substrate wetting and penetration of coatings into wood.
Metolat P 871 is also an oil free and particle free defoamer for solving special foam problems.
Metolat P 871 provides excellent surface wetting without generating foam.
Metolat P 871 is free of mineral oil and silicones.
Metolat P 871 improves good wetting and increases leveling, especially in low viscosity systems.
Metolat P 871 is a low foaming non-ionic wetting agent for water-based systems.
Metolat P 871 improves substrate wetting and leveling by reduction of surface tension.
Metolat P 871 is a low foaming wetting agent for all common aqueous systems.
Metolat P 871 strongly reduces the static and dynamic surface tension and improves wetting and flow, especially on substrates that are difficult to wet.
Metolat P 871 has been specially developed to increase the penetration of wood coatings.
Metolat P 871 is a non-ionic, silicone free wetting agent with low foam tendency for water based printing inks, adhesives, emulsion paints and water borne clear as well as pigmented coatings.
Metolat P 871 improves substrate and pigment wetting.
Metolat P 871 shows a very broad pH stability.
Metolat P 871 is a yellowish brown non-ionic liquid, silicone free wetting agent for water-based systems.
Metolat P 871 improves substrate wetting and levelling.
Metolat P 871 is specifically suitable for systems in contact with food.
Metolat P 871 is VOC free according to 2004/42/EC.
Metolat P 871 is an anionic sulfonated naphthaline.
Metolat P 871 acts as a dispersing agent for carbon black & protective colloid in aqueous dispersions and emulsions.
Metolat P 871 is compatible with most anionic and non-ionic additives.
Metolat P 871 offers good resistance to salts, alkaline and acidic environment.
Metolat P 871 is recommended for grinding & dispersing pigments and dyes in aqueous systems.
Treat levels of 10% on solids are necessary to obtain stable, free flowing 35% carbon black suspensions.
Metolat P 871 has a shelf life of 12 months.
Metolat P 871 is a non-ionic, silicone free wetting agent with low foam tendency for water based printing inks, adhesives, emulsion paints and water borne clear as well as pigmented coatings.
Metolat P 871 improves substrate and pigment wetting.
Metolat P 871 shows a very broad pH stability.
Metolat P 871 is an APEO free wetting agent in powder form.
Metolat P 871 is added to dry blends, which are dissolved in water before application.
The addition of Metolat P 871 results in an accelerated wetting of all solid particles, including sand, cement and fibres.
This results in a more homogeneous mixture of the mass and a more uniform aspect of the surface after drying.
In pigmented systems Metolat P 871 leads to a faster wetting of the pigment surface and prevents reagglomeration.
Colour strength is increased and the pigment can be used more efficiently.
Metolat P 871 improves the homogeneous distribution of the pigments and prevents their floading to the surface.
In powder paints the use of Metolat P 871 prevents rub-out effects.
Metolat P 871 also prevents efflorescence.
Metolat P 871 is a free wetting agent in powder form.
Metolat P 871 is added to dry blends, which are dissolved in water before application.
The addition of Metolat P 871 results in an accelerated wetting of all solid particles, including sand, cement and fibres.
This results in a more homogeneous mixture of the mass and a more uniform aspect of the surface after drying.
In pigmented systems Metolat P 871 leads to a faster wetting of the pigment surface and prevents reagglomeration.
Colour strength is increased and the pigment can be used more efficiently.
Metolat P 871 is an anionic dispersing agent with low foam tendencies suitable for many aqueous systems.
Metolat P 871 is recommended for most common pigments and fillers.
Metolat P 871 is compatible with many emulsion polymers.
Metolat P 871 can be used over a wide pH range.
Metolat P 871 reduces the mill base viscosity and provides higher pigment volume concentrations.
Metolat P 871 prevents the formation of settlements and stabilizes the system.
APPLICATION:
- Cementitious mortars
- Leveling compounds
- Screeds (cement based)
- Powder paints
- Joint fillers
- Leveling compounds
- Screeds (cement and anhydrite based)
- Plasters
- Mortars
- Powder paints
- Premixed pigment powder
FEATURES:
-Blend of organics on an inorganic carrier.
-Powders offering defoaming, anti-shrinkage and wetting & dispersing properties.
-Free flowing powder.
-Different active contents.
BENEFITS:
-Metolat P 871: Reduced shrinkage in cementitious systems.
-Metolat P 871: Improved wetting of pigments and extenders.
-High efficiency and cost effective.
-Plasticizing effect which increases spreading value.
-Easy to disperse.
RECOMMENDED USES:
Normal dosage ranges from 0.1 to 0.2 % for coalescent activity and 0.5 to 5.0 % for anti-shrink properties.
The optimum concentration will vary depending on the system and should be tested.
TYPICAL PROPERTIES:
-Ash: approx. 42 %
-Consistency: powder
-Apparent density: approx. 380 g/l
-Solubility in water: active ingredients soluble in water
CHARACTERISTICS:
-Appearance: powder
-Colour: white
-Ash: approx. 30.5 %
-Apparent density: approx. 270 g/l
-Solubility in water: easily in water emulsifiable
-Surface tension: approx. 37 mN/m
FUNCTION:
-Filler & Extender
-Leveling Agent
FEATURES:
-Accurate composition
-Effective
-Safe to use
STORAGE:
Metolat P 871 is slightly hygroscopic. The organic component slowly evaporates at higher temperatures.
Metolat P 871 should be stored dry between 15 and 25 °C.
The minimum shelf life in closed containers is 15 months from the date of manufacture.
Metolat P 871 is not sensitive to freezing. For best handling it should be stored below 25 °C.
Do not store the product above 60°C and avoid humid storage conditions.
The minimum shelf life in closed containers is 15 months from the date of manufacture.