Quick Search
Morwet DB Powder improves the contact between water and difficult-to-wet solid materials in agricultural formulations.
Morwet DB Powder supports faster mixing, smoother spray preparation, and more even distribution of active ingredients.
Morwet DB Powder is a practical choice for wettable powders and granules where dependable wetting efficiency is essential.
Synonyms: Morwet DB Powder, Sodium methyl dibutylnaphthalene sulfonate, Sodium dibutylnaphthalene sulfonate, Methylated dibutylnaphthalene sulfonate, sodium salt, Alkyl naphthalene sulfonate, Anionic wetting agent, Powdered wetting agent, Agricultural formulation wetting agent
Morwet DB Powder is the sodium salts of methylated dibutylnaphthalene sulfonate.
Morwet DB Powder is an anionic wetting agent based on the sodium salts of methylated dibutylnaphthalene sulfonate.
Morwet DB Powder lowers surface tension and promotes the penetration of water into powdered or granular materials, supporting faster and more uniform wetting of solid particles.
Morwet DB Powder is supplied as a water-soluble tan to brown powder and is primarily used in crop-protection formulations.
Morwet DB Powder is particularly suitable for suspension concentrates, wettable powders, water-dispersible granules, and water-soluble granules requiring reliable wetting performance at relatively low active concentrations.
Uses of Morwet DB Powder:
Morwet DB Powder is primarily used as a high-performance wetting agent in agricultural and industrial formulations containing solid particles.
Morwet DB Powder is commonly incorporated into suspension concentrates, wettable powders, water-dispersible granules, water-soluble granules, and pesticide formulations to improve the rapid and uniform penetration of water into powdered or granular materials.
By lowering the surface tension of water, Morwet DB Powder helps dry particles become wetted more efficiently and supports faster dispersion during mixing and application.
Morwet DB Powder is especially useful in formulations containing hydrophobic active ingredients that are difficult to wet with water alone.
Morwet DB Powder helps reduce floating, clumping, and incomplete hydration of powders while promoting more consistent distribution of the active material throughout the formulation.
Morwet DB Powder can also improve granule disintegration, powder re-dispersion, spray preparation, and overall formulation performance.
In addition to crop-protection products, Morwet DB Powder may be used in pigments, dyes, mineral dispersions, coatings, cleaners, and other water-based systems where effective wetting of solid surfaces is required.
Morwet DB Powder's form makes it suitable for dry blending and easy incorporation into solid formulations, helping manufacturers achieve reliable wetting performance, uniform processing, and consistent product quality.
Stability and Reactivity of Morwet DB Powder:
Chemical stability:
Stable under normal handling and recommended storage conditions.
Reactivity:
No hazardous reactions are expected during normal use.
Conditions to avoid:
Moisture, excessive heat, direct sunlight, and dust formation.
Incompatible materials:
Strong oxidizing agents, strong acids, and strong alkalis.
Hazardous decomposition products:
Carbon oxides, sulfur oxides, sodium compounds, and irritating fumes.
Handling and Storage of Morwet DB Powder:
Handling:
Avoid generating or inhaling dust.
Prevent eye and skin contact and use adequate ventilation.
Storage:
Store in a cool, dry, well-ventilated area.
Keep containers tightly closed and protect from moisture and heat.
First Aid Measures of Morwet DB Powder:
Inhalation:
Move the person to fresh air.
Seek medical attention if irritation or breathing difficulty persists.
Skin contact:
Wash thoroughly with soap and water.
Remove contaminated clothing.
Eye contact:
Rinse cautiously with water for at least 15 minutes.
Seek medical advice if irritation continues.
Ingestion:
Rinse mouth.
Do not induce vomiting.
Seek medical attention if symptoms occur.
Firefighting Measures of Morwet DB Powder:
Suitable extinguishing media:
Water spray, foam, dry chemical powder, or carbon dioxide.
Specific hazards:
Combustion may release carbon oxides, sulfur oxides, and irritating fumes.
Dust may form combustible mixtures in air.
Protective equipment:
Firefighters should wear full protective clothing and self-contained breathing apparatus.
Accidental Release Measures of Morwet DB Powder:
Personal precautions:
Avoid dust formation and inhalation.
Wear gloves, protective clothing, and eye protection.
Environmental precautions:
Prevent entry into drains, soil, and waterways.
Cleaning methods:
Carefully sweep or vacuum the material and place it in a suitable labelled container.
Exposure Controls and Personal Protection of Morwet DB Powder:
Engineering controls:
Provide adequate ventilation and local dust extraction where necessary.
Respiratory protection:
Use a suitable particulate respirator when dust is generated.
Hand protection:
Wear chemical-resistant protective gloves.
Eye protection:
Wear safety glasses or chemical splash goggles.
Skin protection:
Wear suitable protective clothing and closed footwear.
Hygiene measures:
Wash hands after handling and before eating, drinking, or smoking.
Identifiers of Morwet DB Powder:
Product name: Morwet DB Powder
Chemical family: Anionic surfactants
Physical form: Powder
Specifications of Morwet DB Powder:
pH 7.5-10 (5% in 25% IPA)
Active content ≥ 75 %
Water content ≤ 2 %
Characteristics of Morwet DB Powder:
Surface Tension according to Du Noüy, 25°C, 0.1%: 33 mN/m
Wetting power according to Draves, 25°C, 0.1%: ≥600 sec
Solubility: Ethanol: Insoluble
Solubility: Isopropanol: Insoluble
Solubility: Mineral oil: Insoluble
Solubility: Propylene glycol: Insoluble
Solubility: Vegetable oil: Insoluble
Solubility: Water: Soluble
