PRODUCTS

N-OCTYL PYRROLIDONE

N-OCTYL PYRROLIDONE = NOP

N-Octyl pyrrolidone is a 99% pure chemical raw ingredient in a clear, light yellow-colored liquid form.
N-Octyl pyrrolidone is used as a solvent in chemical reactions, components in ink and coating formulations and as a coating stripper in the electronic industry.
N-Octyl pyrrolidone is a substituted heterocyclic organic compound and a rapid nonionic wetting agent in dishwashing, industrial, and institutional cleaners.

CAS Number: 2687-94-7
EC Number: 403-700-8
Molecular Formula: C12H23NO
Molecular Weight: 197.32

N-Octyl pyrrolidone also can serve as a solvent for polymers and hydrophobic substances and has uses as a dye carrier for aramid fabrics.
N-Octyl pyrrolidone is a low to moderate hazard material and risk of adverse health effects associated with both occupational and consumer use of this chemical is anticipated to be low.

N-Octyl pyrrolidone is ideal for use in thickeners and foam stabilizers in shampoos, without need for salt or alkanolamides.
In hair N-Octyl pyrrolidone is used as conditioning agent with mild substantivity, providing body, shine and manageability.

N-Octyl pyrrolidone wetting agent is a low-foaming, N-Octyl pyrrolidone-based solvent for polymers and hydrophobic substances.
Also, N-Octyl pyrrolidone acts as a wetting agent for aqueous systems.

Due to the electron delocalized lactam ring, N-Octyl pyrrolidone interacts with anionic surfactant micelles.
N-Octyl pyrrolidone wetting agent possesses enhanced water solubility, resulting in a synergistic surface tension reduction and wetting enhancement at low concentrations.

N-Octyl pyrrolidone wetting agent is a low foaming, nonionic rapid wetting agent with an HLB of 6 having no critical micelle concentration (CMC).
Due to the electron delocalized lactam ring, N-Octyl pyrrolidone interacts with anionic surfactant to form mixed micelles.
This greatly enhances N-Octyl pyrrolidone water solubility, resulting in a synergistic surface tension reduction and wetting enhancement at very low concentrations.

N-Octyl pyrrolidone is a wetting agent that exhibits a unique combination of solvency and surface activity.

N-Octyl pyrrolidone is a low-foaming, nonionic rapid wetting agent with an HLB of 6 and having no critical micelle concentration (CMC).
Due to the electron delocalized lactam ring, N-Octyl pyrrolidone interacts with anionic surfactant micelles.
This greatly enhances N-Octyl pyrrolidone water solubility, resulting in a synergistic surface tension reduction and wetting enhancement at low concentrations.

N-Octyl pyrrolidone is a faint odor and colorless transparent liquid.

N-Octyl pyrrolidone can be used as wetting agent in printing process, co-solvent for pesticide formulation, pharmaceutical excipients for veterinary injection, dye carrier for aramid fibers, softener and metal cleaning.
N-Octyl pyrrolidone is a low foaming wetting agent which greatly enhances water solubility resulting in synergistic surface tension reduction and wetting enhancement at very low concentration.

N-Octyl pyrrolidone is a permeation enhancer and N-Octyl pyrrolidone effect in transport of steroidal permeants across hairless mouse skin was investigated via a parallel pathway skin model.
N-Octyl pyrrolidone is a speciality pyrrolidone with solvent and low-foam surfactant characteristics.

N-Octyl pyrrolidone is registered under the REACH Regulation and is manufactured in and / or imported to the European Economic Area, at ≥ 1 000 tonnes per annum.
N-Octyl pyrrolidone is used in articles, by professional workers (widespread uses), in formulation or re-packing, at industrial sites and in manufacturing.

N-Octyl pyrrolidone is a substituted heterocyclic organic compound and a rapid nonionic wetting agent in dishwashing, industrial, and institutional cleaners.
N-Octyl pyrrolidone also can serve as a solvent for polymers and hydrophobic substances and has uses as a dye carrier for aramid fabrics.
N-Octyl pyrrolidone is a low to moderate hazard material and risk of adverse health effects associated with both occupational and consumer use of this chemical is anticipated to be low.

N-Octyl pyrrolidone is a peroxide that is used as an elastase inhibitor.
N-Octyl pyrrolidone is a polyvinyl compound that is expressed in plants and animals.

N-Octyl pyrrolidone has been shown to have antielastase activity, which may be due to its ability to inhibit the hydrolysis of elastin by elastases.
N-Octyl pyrrolidone also inhibits the activity of acid hydrazide, sodium pyroglutamate, and monomers such as alcohols and transesterification reactions.
N-Octyl pyrrolidone can be used in solvents such as vinyl ethers to produce polyvinyl ether compounds.

Applications of N-Octyl pyrrolidone:
N-Octyl pyrrolidone (NOP) is a highly efficient and selective solvent, which can be applied to the recovery of organic raw materials, the refining of lubricating oil, the solvent for polymer and polymerization reaction.
N-Octyl pyrrolidone is also widely used in the synthesis of fine chemicals such as drugs, pesticides, pigments, flavors and cleaning agents.

N-Octyl pyrrolidone, through N-Octyl pyrrolidone interaction with anionic surfactant micelles, enhances water solubility and results in synergistic surface tension reduction and wetting enhancement at low concentrations.
N-Octyl pyrrolidone is also used as an intermediate in the production of electronics, industrial chemicals, and as an initial product of some chemical syntheses.
N-Octyl pyrrolidone is also used in the textile industry.

N-Octyl pyrrolidone is ideal for use in thickeners and foam stabilizers in shampoos, without need for salt or alkanolamides.
N-Octyl pyrrolidone can also be used in hair conditioning agents with mild substantivity, providing body, shine and manageability.

N-Octyl pyrrolidone also provides odor reduction in thioglycolate cold waves.
N-Octyl pyrrolidone works well in wipe applications for all-purpose, kitchen, bathroom, glass, floor, and disinfectant.

Uses of N-Octyl pyrrolidone:
N-Octyl pyrrolidone is used in insecticide, cotton defoliant.
N-Octyl pyrrolidone is used in concentrated cleaning agent.

N-Octyl pyrrolidone is used in chemical reaction solvent.
N-Octyl pyrrolidone is used in pharmaceutical synthesis medium.

N-Octyl pyrrolidone is used in coating stripper in electronic industry.
N-Octyl pyrrolidone is used in pharmaceutical, pesticide and organic synthesis intermediate, surfactant, solvent.
N-Octyl pyrrolidone is used in nonionic surfactants, daily chemical products, etc.

N-Octyl pyrrolidone (NOP) is a highly efficient and selective solvent, which can be used in the recovery of organic raw materials, the refining of lubricating oils, and the solvent for polymers and polymerization reactions.
N-Octyl pyrrolidone is also widely used in chemical synthesis reactions.

N-Octyl pyrrolidone is widely used in pesticides, cotton defoliants, concentrated cleaning agents, chemical reaction solvents, pharmaceutical synthesis media, coating strippers in the electronics industry, as well as surfactants and ionic liquids.

Cleaners:
With N-Octyl pyrrolidone low foaming surfactant nature and cosolvency, N-Octyl pyrrolidone provides additional low-foaming cleaning power to a variety of cleaner formulations.

Crop Protection:
N-Octyl pyrrolidone is utilised as a cosolvent in crop protection formulations.
N-Octyl pyrrolidone also contributes to formulation wetting due to N-Octyl pyrrolidone surfactant nature.

Ink:
N-Octyl pyrrolidone is used in fountain solution formulations for offset printing.

Rubber:
N-Octyl pyrrolidone functions as an efficient wetting agent for silica and other fillers and pigments in rubber formulations.

Fountain Solutions:
Functions as an alcohol (isopropanol) substitute in lithographic printing solutions providing alcohol free solution, low VOC, lowers dynamic surface tension, rapid wetting of image areas of printing plates, less ink build-up, longer runs between cleanup.

Pigment Conditioning and Dispersion:
Functions as a grinding aid and crystal growth inhibitor in pigment preparations.
Improves color strength of phthalo blue dispersions, reduced viscosity decreases grinding time, non-combustible, low order of toxicity, less volatility than current systems.

Household, Industrial and Institutional Cleaners:
Acts as a co-surfactant, co-emulsifier, soil penetrant and softener in the following:
Grease Removers
Metal Degreasers
Pre-Treatment Fluid for Paint Line / Ultrafiltration Membrane Cleanup

Improves cleaning due to synergetic wetting effects with anionic, nonionic and amphoteric cosurfactants, promotes solubility of fragrances into formulae, aids penetrations and solubilization of greasy soils, reduces streaking, imparts foam stabilization, and effectively wets high energy (aluminum) and low energy (Teflon) substrates.

Miscellaneous:
Carbon black dispersant for rubber goods
PVC Plasticizer- Improves cold flex at low dose (2-3%)
Specialty Coating- wetting agent

Consumer Uses:
Agricultural chemicals (non-pesticidal)
Not Known or Reasonably Ascertainable
Solvents (which become part of product formulation or mixture)
Surfactant (surface active agent)

Industry Uses:
Intermediates
Solvents (which become part of product formulation or mixture)
Surface active agents
Surfactant (surface active agent)

Widespread uses by professional workers:
N-Octyl pyrrolidone is used in the following products: plant protection products.
N-Octyl pyrrolidone is used in the following areas: agriculture, forestry and fishing.
Other release to the environment of N-Octyl pyrrolidone is likely to occur from: indoor use as processing aid and outdoor use as processing aid.

Advantages of N-Octyl pyrrolidone:
Minimizes streaking on glass
Spreads quickly and penetrates soil at low use levels for easy dirt and soil removal
Provides high solvency power for oily and greasy soils
Listed on U.S. EPA Safer Chemical Ingredient List
Exempt under California Air Resource Board VOC guideline definitions
Biodegradeable
Favorable toxicological profiles
High surface activity at low concentrations
Rapid wetting
Low foam
Synergism with anionic surfactants
Excellent solvency
Good compatibility
Low flammability
Vegan suitable

Key Attributes of N-Octyl pyrrolidone:
Soil penetrant and softener in hard surface cleaners, such as metal cleaning
Wetting agent for industrial and institutional cleaners
Isopropyl alcohol replacement in fountain solutions
Pigment dispersion aid and pigment conditioning solvent
Component of photoresist strippers
Wetting agent for aqueous systems
Component in microemulsifying systems
Soluble in organic solvents; sparingly soluble in water
Excellent solvent for polymers and hydrophobic materials
Biodegradable

Nature of N-Octyl pyrrolidone:
N-Octyl pyrrolidone is white or light colored liquid.
N-Octyl pyrrolidone is boiling point 145 C (40Pa).

N-Octyl pyrrolidone is melting point 10 °c.
N-Octyl pyrrolidone is flash point 116 °c.

N-Octyl pyrrolidone is density 0.9(g/cm3).
N-Octyl pyrrolidone is slightly soluble in water, soluble in most of the polar, non-polar solvents.

N-Octyl pyrrolidone has good coordination ability and surface activity.
N-Octyl pyrrolidone is non-toxic.

N-Octyl pyrrolidone is non-flammable.
N-Octyl pyrrolidone can be biodegradable.

General Manufacturing Information of N-Octyl pyrrolidone:

Industry Processing Sectors:
All Other Basic Organic Chemical Manufacturing
Pesticide, Fertilizer, and Other Agricultural Chemical Manufacturing
Printing Ink Manufacturing
Soap, Cleaning Compound, and Toilet Preparation Manufacturing

Preparation of N-Octyl pyrrolidone:
0.80kg of 2-pyrrolidone and 20.8g of tetrabutylammonium bromide are put into the reaction kettle.
The addition amount of tetrabutylammonium bromide is 2.6% of the mass of 2-pyrrolidone, stirring is started, and the mixed material is heated to a temperature of 85 ℃.

Chloro n-n-octane is slowly dropped from the dropping tank to the reaction kettle for 10 hours, the mass of the added chloron-octane is 1.22kg, and the amount of 2-pyrrolidone before the reaction is about 1.146 times the molar amount of chloron-octane.
Under normal pressure, the reaction temperature is controlled to 90 ℃, and N-Octyl pyrrolidone (NOP) is prepared by stirring.

After the reaction is completed, the crude materials are introduced into the rectification kettle, the pressure of the rectification kettle is controlled to be -0.07Mpa, the reflux ratio is 3, the fraction at 140~155 ℃ is collected, the rectification time is 2 hours, and the primary conversion rate is 85%.
The primary conversion rate mainly refers to the mass percentage of the actual yield and theoretical yield of the product obtained in one reaction cycle after the end of the synthesis reaction.
The remaining solution after rectification can be selected to participate in the synthesis reaction twice, or mixed with the reaction solution after the next rectification cycle for secondary rectification.

Product specification:
N-Octyl pyrrolidone content ≥ 98%, moisture ≤ 1%, impurity ≤ 1%.

Synthesis of N-Octyl pyrrolidone:
N-Octyl pyrrolidone was synthesized by 2-pyrrolidone and tetrabutylammonium bromide stirred with adding n-octane chloride for 10 h at 90 °C.

Handling and storage of N-Octyl pyrrolidone:

Precautions for safe handling:
Provision of sufficient ventilation.
Handle and open container with care.

Clear contaminated areas thoroughly.
Advice on general occupational hygiene

Wash hands before breaks and after work.
Keep away from food, drink and animal feedingstuffs.

Conditions for safe storage, including any incompatibilities:
Keep container tightly closed.
Incompatible substances or mixtures
Observe hints for combined storage.

Consideration of other advice:
Specific designs for storage rooms or vessels.

Recommended storage temperature:
15–25 °C

Specific end use(s):
No information available.

Storage of N-Octyl pyrrolidone:
Store in a cool, ventilated warehouse.
Keep away from fire and heat sources.
Keep the container sealed.

Stability and reactivity of N-Octyl pyrrolidone:

Reactivity:
N-Octyl pyrrolidone is not reactive under normal ambient conditions.

If heated:
Vapours may form explosive mixtures with air.

Chemical stability:
The material is stable under normal ambient and anticipated storage and handling conditions of temperature and pressure.

Possibility of hazardous reactions:

Violent reaction with:
strong oxidiser, Acids

Conditions to avoid:
Keep away from heat.
Decompostion takes place from temperatures above: 475 °C.

Incompatible materials:
There is no additional information.

Safety Information of N-Octyl pyrrolidone:

Pictograms:
GHS05,GHS09

Signal Word:
Danger

Hazard Statements:
H314 - H411

Precautionary Statements:
P273 - P280 - P303 + P361 + P353 - P304 + P340 + P310 - P305 + P351 + P338 - P363

Hazard Classifications:
Aquatic Chronic 2 - Skin Corr. 1B

Storage Class Code:
8A - Combustible, corrosive hazardous materials

WGK:
WGK 2

Flash Point(F):
287.6 °F - closed cup

Flash Point(C):
142 °C - closed cup

Personal Protective Equipment:
dust mask type N95 (US), Eyeshields, Gloves

First aid measures of N-Octyl pyrrolidone:

General notes:
Take off immediately all contaminated clothing.
Self-protection of the first aider.

Following inhalation:
Provide fresh air.

Following skin contact:
After contact with skin, wash immediately with plenty of water.
Immediate medical treatment required because corrosive injuries that are not treated are hard to cure.

Following eye contact:
In case of contact with eyes flush immediately with plenty of flowing water for 10 to 15 minutes holding eyelids apart and consult an ophthalmologist.
Protect uninjured eye.

Following ingestion:
Rinse mouth immediately and drink plenty of water.
Call a physician immediately.
If swallowed danger of perforation of the esophagus and the stomach (strong corrosive effects).

Most important symptoms and effects, both acute and delayed:
Corrosion, Risk of blindness, Gastric perforation, Risk of serious damage to eyes.

Firefighting measures of N-Octyl pyrrolidone:

Suitable extinguishing media:
Co-ordinate firefighting measures to the fire surroundings
Water spray, alcohol resistant foam, dry extinguishing powder, BC-powder, carbon dioxide (CO2)

Unsuitable extinguishing media:
water jet

Special hazards arising from N-Octyl pyrrolidone or mixture:
Combustible.

Hazardous combustion products:

In case of fire may be liberated:
Nitrogen oxides (NOx), Carbon monoxide (CO), Carbon dioxide (CO2)

Advice for firefighters:
In case of fire and/or explosion do not breathe fumes.
Fight fire with normal precautions from a reasonable distance.

Wear self-contained breathing apparatus.
Wear full chemical protective clothing.

Accidental release measures of N-Octyl pyrrolidone:

For non-emergency personnel:
Use personal protective equipment as required.
Avoid contact with skin, eyes and clothes.
Do not breathe vapour/spray.

Environmental precautions:
Keep away from drains, surface and ground water.

Advice on how to contain a spill:
Covering of drains.

Advice on how to clean up a spill:
Absorb with liquid-binding material (sand, diatomaceous earth, acid- or universal binding agents).
Other information relating to spills and releases

Place in appropriate containers for disposal.
Ventilate affected area.

Identifiers of N-Octyl pyrrolidone:
Empirical Formula (Hill Notation): C12H23NO
CAS Number: 2687-94-7
Molecular Weight: 197.32
Beilstein: 1526318
EC Number: 403-700-8
MDL number: MFCD00074965
PubChem Substance ID: 24860036
NACRES: NA.22

EC / List no.: 403-700-8
CAS no.: 2687-94-7
Mol. formula: C12H23NO

Molecular Formula: C12H23NO
Molecular Weight: 197.32

Empirical formula: C12H23NO
Molar mass (M): 197,32 g/mol
Density (D): 0,92 g/cm³
Boiling point (bp): 305 °C
Flash point (flp): 142 °C
Melting point (mp): -31,1 °C
ADR: 8 II
WGK: 2
CAS No.: 2687-94-7
EG-Nr.: 403-700-8
UN-Nr.: 3267

CBNumber: CB0388315
Molecular Formula: C12H23NO
Molecular Weight: 197.32
MDL Number: MFCD00074965
MOL File: 2687-94-7.mol

CAS: 2687-94-7
Color: Yellow
Molecular Formula: C12H23NO
UN Number: 1760
InChI Key: WPPOGHDFAVQKLN-UHFFFAOYSA-N
PubChem CID: 3033871
Percent Purity: ≥98.0% (GC)
Melting Point: -23°C
Boiling Point: 172°C
MDL Number: MFCD00074965
Quantity: 25 mL
SMILES: CCCCCCCCN1CCCC1=O
Molecular Weight (g/mol): 197.32
Formula Weight: 197.32
Physical Form: Liquid

Properties of N-Octyl pyrrolidone:
Quality Level: 100
Assay: 98%
Form: liquid
Refractive index: n20/D 1.465 (lit.)
bp: 170-172 °C/15 mmHg (lit.)
mp: −25 °C (lit.)
Density: 0.92 g/mL at 25 °C (lit.)
SMILES string: CCCCCCCCN1CCCC1=O
InChI: 1S/C12H23NO/c1-2-3-4-5-6-7-10-13-11-8-9-12(13)14/h2-11H2,1H3
InChI key: WPPOGHDFAVQKLN-UHFFFAOYSA-N

Melting point: −25 °C(lit.)
Boiling point: 170-172 °C15 mm Hg(lit.)
Density: 0.92 g/mL at 25 °C(lit.)
vapor pressure: 0.03-0.08Pa at 20℃
refractive index: n20/D 1.465(lit.)
Flash point: >230 °F
storage temp.: Sealed in dry,Room Temperature
form: clear liquid
pka: -0.42±0.20(Predicted)
color: Colorless to Yellow
Specific Gravity: 0.92
Water Solubility: 1.14-1.25g/L at 20℃
BRN: 1526318
InChIKey: WPPOGHDFAVQKLN-UHFFFAOYSA-N
LogP: 4.15 at 20℃
CAS DataBase Reference: 2687-94-7(CAS DataBase Reference)
FDA UNII: N8YJ26SB8V
EPA Substance Registry System: N-Octyl pyrrolidone (2687-94-7)

Physical state: liquid
Form: viscous
Colour: colourless - yellow
Odour: amine
Melting point/freezing point: -31.1 °C
Boiling point or initial boiling point and boiling range: 292–305 °C at 1,009 hPa
Flash point: 142 °C at 1,013 hPa ((DIN 51758))
Auto-ignition temperature: 225 °C at 1,013 hPa
Decomposition temperature: 475 °C
pH (value): 7–10
Kinematic viscosity 9.1 mm²/s at 20 °C
Dynamic viscosity 8.38 mPa s at 20 °C
Solubility(ies):
Water solubility: 1.14 g/l at 20 °C
Partition coefficient: n-octanol/water (log value): 4.1 (pH value: 4, 20 °C)
Soil organic carbon/water (log KOC): 2.27–2.64
Vapour pressure: 0.02 hPa at 55 °C
Density: 0.92 g/cm³ at 20 °C

Other information of N-Octyl pyrrolidone:
Information with regard to physical hazard classes: hazard classes acc. to GHS (physical hazards): not relevant
Other safety characteristics: Surface tension 30.8 mN/m (20 °C) (ECHA)

Molecular Weight: 197.32
XLogP3-AA: 3.2
Hydrogen Bond Donor Count: 0
Hydrogen Bond Acceptor Count: 1
Rotatable Bond Count: 7
Exact Mass: 197.177964357
Monoisotopic Mass: 197.177964357
Topological Polar Surface Area: 20.3 Å²
Heavy Atom Count: 14
Complexity: 168
Isotope Atom Count: 0
Defined Atom Stereocenter Count: 0
Undefined Atom Stereocenter Count: 0
Defined Bond Stereocenter Count: 0
Undefined Bond Stereocenter Count: 0
Covalently-Bonded Unit Count: 1
Compound Is Canonicalized: Yes

Specifications of N-Octyl pyrrolidone:
Appearance: Colorless clear liquid
Purity: 99% min
Water: 0.2% max
Color (Pt-Co): 30 max

Melting Point: -23°C
Color: Yellow
Boiling Point: 172°C
UN Number: 1760
Quantity: 25 mL
Formula Weight: 197.32
Percent Purity: ≥98.0% (GC)
Physical Form: Liquid
Chemical Name or Material: 1-N-Octyl pyrrolidone

Names of N-Octyl pyrrolidone:

Regulatory process names:
N-Octyl pyrrolidone
1-OCTYL-2-PYRROLIDONE
N-Octyl pyrrolidone
N-(n-octyl)-2-pyrrolidinone
N-(N-Octyl)-2-pyrrolidinone
N-(n-octyl)-2-pyrrolidinone
N-(n-Octyl)-2-pyrrolidone
n- Annex I, E.3 (chelating and complexing agents)
N-(n-octyl)-2-pyrrolidone
N-Octyl pyrrolidone
N-Octylpyrrolidinone
N-Octyl pyrrolidone

Translated names:
1-n-oktil-2-pirrolidon (hu)
1-octil-2-pirrolidona (es)
1-octil-2-pirrolidona (pt)
1-octyl-2-pyrrolidon (da)
1-Octyl-2-pyrrolidon (de)
1-octyl-2-pyrrolidon (nl)
1-oktil-2-pirolidon (sl)
1-oktyl-2-pyrrolidon (no)
1-oktyl-2-pyrrolidon (sv)
1-oktylo-2-pirolidon (pl)
1-Oktyyli-2-pyrrolidoni (fi)
1-ottil-2-pirrolidone (it)
1-oκτυλo-2-πυρρoλιδBoν (el)
<I>N</I>-(n-oktil)-2-pirolidon (hr)
N-(n-octil)-2-pirolidona (ro)
N-(n-octyl)-2-pyrrolidone (fr)
N-(n-oktil)-2-pirolidinonas (lt)
N-(N-oktil)-2-pirolidinons (lv)
N-(n-oktyl)-2-pyrrolidinon (no)
N-(n-oktyl)-2-pyrrolidon (no)
N-(n-oktylo)-2-pirolidon (pl)
N-(n-oktüül)-2-pürrolidoon (et)
N-(n-октил)-2-пиролидoн (bg)
N-oktyl-2-pyrrolidon (cs)
N-oktylo-2-pirolidon (pl)
N-oktylpyrolidín-2-ón (sk)

CAS names:
N-Octyl pyrrolidone

IUPAC names:
1-N-Octyl pyrrolidone
1-OCTYL-2-PYRROLIDONE
1-Octyl-2-pyrrolidone
1-octylpyrrolidin-2-one
N-Octyl pyrrolidone
N-(n-octyl)-2-pyrrolidinone
N-(n-octyl)-2-pyrrolidinone
N-(n-octyl)-2-pyrrolidone
NOP

Trade names:
Agsolex 8
Flexidone 100
Gaftex HI-8
NOP

Other identifiers:
2687-94-7
613-098-00-0

Synonyms of N-Octyl pyrrolidone:
N-Octyl pyrrolidone
1-N-Octyl pyrrolidone
1-OCTYL-2-PYRROLIDONE
1-OCTYLPYRROLIDIN-2-ONE
1-octylpyrrolidine
N-Octyl pyrrolidone
1-Octyl-2-pyrrolidon
n-octylpyrrolidinone
Methylglyoxal 78-98-8
1-octyl-2-pyrrolidinon
1-octylpyrrolidin-2-one
2687-94-7
1-Octyl-2-pyrrolidone
N-Octyl pyrrolidone
N-Octyl pyrrolidone
N-Octyl pyrrolidone
1-N-Octyl pyrrolidone
N-(n-octyl)-2-pyrrolidinone
N-Octyl pyrrolidone
N8YJ26SB8V
N-Octylpyrrolidinone
n-octyl-2-pyrrolidinone
n-(n-octyl)-2-pyrrolidone
BRN 1526318
N-Octyl pyrroldone
N-Octyl pyrrolidone
Flexidone 100
N-N-Octyl pyrrolidone
Surfadone LP 100
YNR-NOP
AGSOLEX 8
N-OCTYLBUTYROLACTAM
1-octyl-pyrrolidin-2-one
UNII-N8YJ26SB8V
EC 403-700-8
SCHEMBL37427
1-Octyl-2-pyrrolidone, 98%
CHEMBL3186828
DTXSID4036435
WPPOGHDFAVQKLN-UHFFFAOYSA-
CHEBI:183762
CAPRYLYL PYRROLIDONE [INCI]
AMY21818
ZINC2545315
Tox21_301550
MFCD00074965
AKOS015839938
CS-W015668
NCGC00255442-01
LS-14149
CAS-2687-94-7
DB-067695
FT-0654983
O0325
E76060
J-016582
J-523740
Q63395635
NOP
N-Octyl pyrrolidone
N-ethyl pyrrolidone
N-Octyl pyrrolidone
1-OCTYL-2-PYRROLIDONE
1-octyl-2-pyrrolidone
1-octyl-2-pyrrolidinon
N-Octyl pyrrolidone
1-OCTYLPYRROLIDIN-2-ONE
1-N-Octyl pyrrolidone
2-Pyrrolidinone,1-octyl-
N-(n-octyl)-2-pyrrolidinone
1-octylpyrrolidin-2-one
2687-94-7
1-Octyl-2-pyrrolidone
N-Octyl pyrrolidone
N-Octyl pyrrolidone
N-Octyl pyrrolidone
N-Octyl pyrrolidone
1-N-Octyl pyrrolidone
N-(n-octyl)-2-pyrrolidinone
N-Octylpyrrolidinone
BRN 1526318
Q63395635
n-(n-octyl)-2-pyrrolidone
N-Octyl pyrroldone
N-Octyl pyrrolidone
N-N-Octyl pyrrolidone
ACMC-1CJMS
1-octyl-pyrrolidin-2-one
EC 403-700-8
DSSTox_CID_16435
DSSTox_RID_79280
DSSTox_GSID_36435
SCHEMBL37427
KSC489O5D
1-Octyl-2-pyrrolidone, 98%
CHEMBL3186828
DTXSID4036435
CTK3I9751
KS-00000WRD
WPPOGHDFAVQKLN-UHFFFAOYSA-
ZINC2545315
Tox21_301550
ANW-26072
MFCD00074965
AKOS015839938
CS-W015668
NCGC00255442-01
SC-17449
CAS-2687-94-7