Quick Search
DESCRIPTION:
OMACIDE IPBC 40% DPG Fungicide is a broad spectrum liquid fungicide based on the widely used fungicide active, 3-iodopropynybutylcarbamate (IPBC).
OMACIDE IPBC 40 is a 20% blend of IPBC (active ingredient) in dipropylene glycol.
OMACIDE IPBC 40 is recommended for use in the formulation of soluble oil and semi-synthetic concentrates.
However, this product can also be used as a post treatment additive (i.e. tank side addition) for metalworking fluid systems which have been identified as being contaminated with fungi.
Iodopropynyl butyl carbamate (IPBC)
OMACIDE IPBC 40 is Used as a broad spectrum fungicide additive in architectural coatings and construction applications such as paints and stains.
OMACIDE IPBC 40 Prevents dry film fungal growth
Irreversible yellowing of the dry film may occur soon after application.
Use level: 0.3-0.5% of active material by weight of total formulation.
OMACIDE™ IPBC 20 Fungicide is a highly effective, fast acting antifungal agent based on the chemical active 3-iodopropynyl butylcarbamate (IPBC).
OMACIDE IPBC 40 is a mild odor, amber colored liquid for use as a post treatment additive.
OMACIDE IPBC 40 is most effective when used in dilute soluble oil and semi-synthetic fluid systems.
OMACIDE™ IPBC 20 Fungicide can be applied in metalworking, cutting, cooling, and lubricating fluids.
OMACIDETM™ IPBC 20 TX Fungicide is a highly effective broad spectrum fungicide suitable for the preservation of a variety of solvent-based industrial products, including architectural coatings, wood stains and construction materials, against spoilage from fungi & yeasts.
The active agent is 3-iodo 2-propynyl-N-butylcarbamate (IPBC) in a solvent package of an ester alcohol and glycol ether.
Functions: Anti-Microbial Agent, Anti-Microbial Agent, Biocide, Fungicide
APPLICATIONS OF OMACIDE IPBC 40:
OMACIDE IPBC 40 is particularly effective as a dry film preservative for:
Architectural & Industrial Paints & Coatings
Construction materials including flooring adhesives, caulks, sealants,
grouts and jointing compounds.
Antimicrobial Properties:
The levels of active agent needed to prevent the growth of problem micro-organisms are listed in Table 1; Minimum Inhibitory Concentrations (MICs) do not represent effective in-use concentrations which should be discussed with your local Lonza representative.
OMACIDE™ IPBC 20 TX Fungicide has a non-specific mode of action which means that resistance is very unlikely to occur.
Detailed information on the mode of action is available on request.
Compatibility
IPBC hydrolyses in strong alkali media & decomposes at 180°C.
The active has been associated with irreversible yellowing of dry film in some formulations, particularly those containing styrenated polymers.
PROPERTIES OF OMACIDE IPBC 40:
Value Units Test Method / Conditions
Active Agent Content min. 20 % w/w
Color max. 3 Gardner
Specific Gravity (at 30°C) 1.04
Boiling Point 244 °C
Flash Point 120 °C Closed cup
Solubility in Water (at 20°C) 500 to 1000 ppm
Micro-organism ATTC No. (MIC)* (ppm)
Bacteria -
Escherichia coli - >500
Klebsiella pneumoniae - >500
Pseudomonoas aeruginosa - 800
Staphylococcus aureus - 250
Fungi
Alternaria alternata - <1
Aspergillus niger 9642 <1
Aspergillus versicolor 11730 <1
Aureobasidium pullulans 9348
Chaetomium globosum 6205
Fusarium solani -
Penicillium pinophilum 9644
Ulocladium atrum -
Trichoderma viride 9645
Yeasts
Candida albicans 10231 6
Saccharomyces cerevisiae - 6
Rhodotorula rubra - 8
SAFETY INFORMATION ABOUT OMACIDE IPBC 40
First aid measures:
Description of first aid measures:
General advice:
Consult a physician.
Show this safety data sheet to the doctor in attendance.
Move out of dangerous area:
If inhaled:
If breathed in, move person into fresh air.
If not breathing, give artificial respiration.
Consult a physician.
In case of skin contact:
Take off contaminated clothing and shoes immediately.
Wash off with soap and plenty of water.
Consult a physician.
In case of eye contact:
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
Continue rinsing eyes during transport to hospital.
If swallowed:
Do NOT induce vomiting.
Never give anything by mouth to an unconscious person.
Rinse mouth with water.
Consult a physician.
Firefighting measures:
Extinguishing media:
Suitable extinguishing media:
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture
Carbon oxides, Nitrogen oxides (NOx), Hydrogen chloride gas
Advice for firefighters:
Wear self-contained breathing apparatus for firefighting if necessary.
Accidental release measures:
Personal precautions, protective equipment and emergency procedures
Use personal protective equipment.
Avoid breathing vapours, mist or gas.
Evacuate personnel to safe areas.
Environmental precautions:
Prevent further leakage or spillage if safe to do so.
Do not let product enter drains.
Discharge into the environment must be avoided.
Methods and materials for containment and cleaning up:
Soak up with inert absorbent material and dispose of as hazardous waste.
Keep in suitable, closed containers for disposal.
Handling and storage:
Precautions for safe handling:
Avoid inhalation of vapour or mist.
Conditions for safe storage, including any incompatibilities:
Keep container tightly closed in a dry and well-ventilated place.
Containers which are opened must be carefully resealed and kept upright to prevent leakage.
Storage class (TRGS 510): 8A: Combustible, corrosive hazardous materials
Exposure controls/personal protection:
Control parameters:
Components with workplace control parameters
Contains no substances with occupational exposure limit values.
Exposure controls:
Appropriate engineering controls:
Handle in accordance with good industrial hygiene and safety practice.
Wash hands before breaks and at the end of workday.
Personal protective equipment:
Eye/face protection:
Tightly fitting safety goggles.
Faceshield (8-inch minimum).
Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection:
Handle with gloves.
Gloves must be inspected prior to use.
Use proper glove
removal technique (without touching glove's outer surface) to avoid skin contact with this product.
Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
Full contact:
Material: Nitrile rubber
Minimum layer thickness: 0.11 mm
Break through time: 480 min
Material tested:Dermatril (KCL 740 / Aldrich Z677272, Size M)
Splash contact
Material: Nitrile rubber
Minimum layer thickness: 0.11 mm
Break through time: 480 min
Material tested:Dermatril (KCL 740 / Aldrich Z677272, Size M)
It should not be construed as offering an approval for any specific use scenario.
Body Protection:
Complete suit protecting against chemicals, The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection:
Where risk assessment shows air-purifying respirators are appropriate use a fullface respirator with multi-purpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backup to engineering controls.
If the respirator is the sole means of protection, use a full-face supplied air respirator.
Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU).
Control of environmental exposure
Prevent further leakage or spillage if safe to do so.
Do not let product enter drains.
Discharge into the environment must be avoided.
Stability and reactivity:
Chemical stability:
Stable under recommended storage conditions.
Incompatible materials:
Strong oxidizing agents:
Hazardous decomposition products:
Hazardous decomposition products formed under fire conditions.
Carbon oxides, Nitrogen oxides (NOx), Hydrogen chloride gas.
Disposal considerations:
Waste treatment methods:
Product:
Offer surplus and non-recyclable solutions to a licensed disposal company.
Contact a licensed professional waste disposal service to dispose of this material.
Contaminated packaging:
Dispose of as unused product.
