ORGAL P 878
Orgal P 878 is an acrylic polymer designed for high performance coatings in a variety of exterior and interior applications.
This APEO-free grade shows wet and dry adhesion, excellent exterior durability, early wash-off resistance, water-, abrasion-, scratch-, crack-, chalk-, alkali resistance in water-based coatings.
Orgal P 878 also offers gloss and tint retention and excellent rheology modifier response.
Due to its hydrophobic and tough nature, paints and clear coatings based on Orgal P 878 exhibit outstanding water resistance and adhesion onto porous substrates, early wash-off (rain) resistance, as well as very good block, abrasion and dirt pick-up resistances.
Orgal P 878 has a maximum shelf life of 12 months.
A broad range of all acrylics, styrene acrylics and vinyl acrylics for matt, semi-gloss and gloss interior and exterior paints.
All new product developments are in line with the latest VOC regulations, phasing out formaldehyde, ammonia and other restricted substances.
Chemical Composition: AC
Total Solids (%±1): 46
pH: 8.0-9.0
Viscosity (mPa.s, max): 500
MFFT (°C): 14
Tg (°C): 21
AC :All Acrylic / Acrylic Copolymer
Architectural Coatings Suitability
Interior Paints: excellent
Exterior Paints: excellent
Egshell-Semigloss Paints: suitable
Gloss Paints: not suitable
Primers: not suitable
Textured Paints: not suitable
Plaster/Putty: not suitable
Roof Tile Paints: excellent
EIFS Topcoat: not suitable
Silicate Paints: not suitable
Low VOC Paints: not suitable
Elastomeric Wall Paints: not suitable
Anticarbonation Coatings: not suitable
Wood & Specialty Coatings Suitability
DIY Wood Paints: not suitable
Gloss/Trim Paints: not suitable
Joinery Coatings: not suitable
Furniture Coatings: not suitable
Parquet Coatings: suitable
Wood Stains: not suitable
Sandable Sealers/Primers: not suitable
Tanin/Stain Blocking: not suitable
MDF Panel Coatings: not suitable
Metal Coatings: not suitable
Floor Coatings: excellent
Shelf Life: 12 months