OUTDOOR MATTING AGENT HM3326

Outdoor Matting Agent HM3326 gives outdoor powder coatings a stable matte finish while helping preserve surface smoothness and mechanical strength.
Outdoor Matting Agent HM3326 is especially useful in polyester/TGIC, polyester/HAA, and epoxy/polyester systems where outdoor durability and anti-yellowing performance are important.
Outdoor Matting Agent HM3326 supports reliable gloss reduction with good overbaking stability, making the final coating look uniform, clean, and weather-resistant.

Synonyms: Outdoor Matting Agent HM3326, HM3326, HM3326 Outdoor Matting Additive, HM3326 Powder Coating Matting Agent

Outdoor Matting Agent HM3326 is a matting agent synthetized from tailor-made macromolecule resin and modified microcrystal wax under the complex catalysis of amido.

Outdoor Matting Agent HM3326 is a matting agent for outdoor powder coating systems.
Outdoor Matting Agent HM3326 is synthesized from tailor-made macromolecule resin and modified microcrystal wax under amido complex catalysis.

Application and Performance of Outdoor Matting Agent HM3326:
Outdoor Matting Agent HM3326 can be applied in Polyester/TGIC, Polyester/HAA, and Epoxy/Polyester powder systems.
In Polyester/TGIC powder system, gloss levels ranging from 25-40% may be obtained if add 2%-5% HM3326.

Outdoor Matting Agent HM3326 is especially suitable in producing weatherability powder coatings such as aluminum alloy ceiling type.
Outdoor Matting Agent HM3326 has a terrific overbaking stability, anti-yellowing property, and it will not affect levelling and mechanical properties.
Outdoor Matting Agent HM3326 is not recommended to add any accelerant to improve the impact property or add any other matting wax to improve the film matting property in the formulation.

Stability and Reactivity of Outdoor Matting Agent HM3326:

Chemical stability:
Outdoor Matting Agent HM3326 is stable under normal dry storage conditions.

Reactivity:
Outdoor Matting Agent HM3326 is not expected to react dangerously under normal use.

Conditions to avoid:
Heat, moisture, dust formation, open flames, and poor ventilation should be avoided.

Incompatible materials:
Strong oxidizing agents, strong acids, and strong bases should be avoided.

Hazardous decomposition products:
Fire may produce carbon oxides, irritating smoke, and organic vapors.

Handling and Storage of Outdoor Matting Agent HM3326:

Handling:
Avoid breathing dust and contact with skin or eyes.
Use in a well-ventilated area.

Storage:
Store tightly closed in a cool, dry, and ventilated place.
Keep away from heat, moisture, and ignition sources.

First Aid Measures of Outdoor Matting Agent HM3326:

Inhalation:
Move to fresh air.

Skin contact:
Wash with soap and water.

Eye contact:
Rinse with water for at least 15 minutes.

Ingestion:
Rinse mouth and seek medical advice if needed.

Firefighting Measures of Outdoor Matting Agent HM3326:

Suitable extinguishing media:
Use foam, dry powder, carbon dioxide, or water spray.

Special hazards:
Fire may release irritating fumes.

Protective equipment:
Wear breathing apparatus and protective clothing.

Accidental Release Measures of Outdoor Matting Agent HM3326:

Personal precautions:
Avoid dust inhalation and use protective equipment.

Environmental precautions:
Prevent entry into drains and waterways.

Cleaning method:
Sweep or vacuum carefully and place into closed containers.

Exposure Controls / Personal Protection of Outdoor Matting Agent HM3326:

Engineering controls:
Use ventilation.

Respiratory protection:
Wear a dust mask if needed.

Hand protection:
Wear gloves.

Eye protection:
Wear safety goggles.

Skin protection:
Wear protective clothing.

Properties of Outdoor Matting Agent HM3326:
Appearance: Light yellow granule
Solid content (%): ≥99.0